OWNER'S MANUAL LG CineBeam DLP Projector Please read the safety information carefully before using this product. HF65LS HF65LSR www.lg.com P/NO : SAC37813516 (1901-REV00) Copyright © 2019 LG Electronics Inc. All Rights Reserved.
LICENSES Supported licenses may differ by model. For more information about licenses, visit www.lg.com. ENGLISH The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries. Manufactured under license from Dolby Laboratories. Dolby, Dolby Vision, Dolby Audio, Dolby Atmos, and the double-D symbol are trademarks of Dolby Laboratories.
SAFETY PRECAUTIONS WARNING/CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
ENGLISH • Do not place flammable materials such as aerosols near the projector. -- This may result in fire. • Do not allow children to cling to or climb up to the projector. -- This may cause the projector to fall, causing injury or death. • Do not install the product in a place with no ventilation (e.g., on a bookshelf or in a closet) or on a carpet or cushion. -- This may result in fire due to the increase in internal temperature.
CAUTION WARNING • DISCONNECTING THE DEVICE FROM THE MAIN POWER -- The Power plug is the disconnecting device. In case of an emergency, the Power Plug must remain readily accessible. • The grounding wire should be connected. (Except for devices which are not grounded.) -- Ensure that you connect the grounding cable to avoid electric shock. If it is not possible to ground the unit, have a qualified electrician install a separate circuit breaker.
ENGLISH • Do not plug too many devices into one multi-power outlet. -- This may result in fire due to the power outlet overheating. • Keep the AC adapter, power plug, and the used power outlet clean from dust or foreign materials building up. -- This may result in fire. • If there is any smoke or a burning smell from the projector or AC adapter, stop using the product immediately. Disconnect the power cord from the power outlet, and then contact the customer service center. -- This may result in fire.
• The surface of the AC adapter is hot. Keep the AC adapter out of the reach of children and avoid touching it during use. • Never disassemble the power supply devices (AC adapter/power cord, etc.). -- This may damage the power cord and result in a fire or electric shock. • Connect the AC adapter and the power cord firmly. -- Not doing so may result in a product failure or fire. • Do not place heavy objects or put pressure on the power cord and AC adapter and avoid damage.
When in Use WARNING ENGLISH • Do not place anything containing liquid on top of the projector such as a vase, flower pot, cup, cosmetics, medicine, or ornaments, candles, etc. -- This may result in fire or electric shock, or cause injury due to falling. • In the event that there is a heavy impact or the cabinet is damaged, switch it off, unplug it from the power outlet and contact an authorized service center. -- This may result in electric shock.
CAUTION • Do not place heavy objects on the projector. -- It may fall down and cause personal injury. • Be careful not to allow any impact to the lens during transport. • Do not touch the lens of the projector. -- The lens may be damaged. • Do not use any sharp tools on the projector such as a knife or hammer, because this may damage the casing. • In the event that no image appears on the screen or no sound is heard, stop using the projector.
ENGLISH • It is recommended that you maintain a distance of more than 5 to 7 times the diagonal length of the screen. -- If you watch the screen at a close distance for a long time, your eyesight may become worse. • Do not block the light beam emitted from the projector using a book or other object. -- Lengthy exposure to the projector beam may result in fire. In addition, the lens may be overheated and damaged by the reflected heat.
CAUTION ENGLISH • Contact your seller or our service center once a year to clean the internal parts of the projector. -- If you do not clean the projector for a long period of time, dust will accumulate, which may result in fire or damage to the projector. • When cleaning plastic parts such as the projector case, unplug the power first and wipe with a soft cloth. Do not spray with water or wipe with a wet cloth.
Others WARNING ENGLISH • When you go out, place the projector out of reach of animals, and remove the power plug from the wall outlet. -- Using a damaged power cord may result in short circuit or fire. • Do not use the projector near highprecision electronic devices or those that transmit weak radio signal. -- This may affect the operation of the product, causing an accident. • Only a qualified technician can disassemble or modify the projector.
CAUTION Risk Group 2 CAUTION Possibly hazardous optical radiation emitted from this product. Do not stare at operating lamp. May be harmful to the eye. This label is attached to the bottom of the product and language may differ. ENGLISH • Do not use or store the projector outdoors for long periods of time. • Do not mix new batteries with old ones. -- Burst or leaking batteries may result in damage or injury. • Be sure to unplug if the projector is not to be used for a long period.
CONTENTS LICENSES ENGLISH SAFETY PRECAUTIONS PREPARATION 2 3 15 Accessories 15 Optional Extras 16 Parts and Components 17 -- Main Unit 17 Using the Joystick Button 19 -- Basic functions 19 -- Adjusting the menu 20 Projector Status Indicators 20 Installation 21 -- Installation Precautions 21 -- Projection Distance per Screen Size 23 -- Kensington Security System 25 MAGIC REMOTE CONTROL 26 To Register the Magic Remote Control 28 To Re-register the Magic Remote Control 28 Using the Magic Remote Control
PREPARATION The pictures may differ slightly from the actual product. ENGLISH Accessories Accessories included with the projector are show below. Accessories are subject to change without prior notice. New accessories may be added or old ones removed.
Optional Extras To purchase optional accessories, visit an electronics store or online shopping site or contact the retail store where you purchased the product. Optional accessories are subject to change without prior notice.
Parts and Components Main Unit Joystick Button Speaker Outlet Vent1) Mirror 2) Inlet Vent Focus Ring Speaker Lens2) Inlet Vent IR Receiver Bottom of the Projector Adjustable leg3) 1) Due to the high temperature of vent area, do not get close to the vent area. 2) Do not touch the lens and mirror when using the projector. The lens may be damaged. (Keep lens away from sharp objects.) 3) Turn the adjustable leg left or right to adjust the angle.
ENGLISH Side 3 2 1 USB1 USB2 Back 5 6 No.
Using the Joystick Button You can operate the projector by pressing the button or moving the joystick left, right, up, or down. Power On When the projector is turned off, place your finger on the joystick button, press it once, and release it. Power Off Press and hold the joystick button for more than 3 seconds while the projector is on. Volume Control Place your finger over the joystick button and move it left or right, you can adjust the volume level.
Adjusting the menu ENGLISH When the projector is turned on, press the joystick button one time. You can adjust the menu items ( , , , ) moving the joystick button left, right, up, or down. Move to the desired menu item, and then press the joystick button once to select it. Turns the power off. Changes the input source. Clears on-screen displays and returns to projector viewing. Displays the Settings menu.
Installation Installation Precautions -- Do not place the projector on a carpet or rug. If the projector’s inlet vent is on the bottom, be careful not to block the vent and always use the projector on a solid, level surface. ENGLISH • Place the projector in a wellventilated environment. -- To prevent internal overheating, install the projector in a wellventilated place. Do not place anything near the projector. That may block its air vents.
ENGLISH • The projector is manufactured using high-precision technology. You may, however, see tiny black dots and/ or bright colored dots (red, blue or green) that continuously appear on the projector screen. This is a normal result of the manufacturing process and does not indicate a malfunction. • The remote control may not work in an environment where a lamp equipped with electronic ballasts or a three-wavelength fluorescent lamp is installed.
Projection Distance per Screen Size 1 2 4 Place the projector an appropriate distance away from the screen. The distance between the projector and the screen determines the actual size of the image. Position the projector so that the lens is at a right angle to the screen. If the projector is not at a right angle, the projected image will look distorted. To correct the distortion, use the Edge Adjustment function. Connect the power cord of the projector and the connected device to the wall outlet.
Ratio of upward projection: 125 % X Screen ENGLISH Y C C D D B A inches 60 70 80 90 100 mm 1524 1778 2032 2286 2540 Horizontal Size (X) x Vertical Size (Y) mm 1328 x 747 1550 x 872 1771 x 996 1992 x 1121 2214 x 1245 A mm 414 482 550 618 686 Screen Size B mm 105 173 241 309 377 C mm 149 181 213 245 276 D mm 241 273 304 336 368 The projection distance may vary depending on the installation conditions.
Kensington Security System ENGLISH • This projector has a Kensington Security Standard connector as an anti-theft mechanism. Connect a Kensington Security System cable as shown below. • For more information on installation and use of the Kensington Security System, refer to the user’s guide provided with the Kensington Security System. • The Kensington Security System is an optional accessory.
MAGIC REMOTE CONTROL ENGLISH If the battery low message appears while using the Projector, replace the batteries. As shown in the figure, press the top of the battery cover and slide it down the cover. Insert two new and identical batteries (1.5 V, AA type) with + and - poles pointing in the correct direction in the remote control. 1 NOTE • Do not mix new batteries with old ones. (POWER) Turns the Projector on or off.
Accesses the Home menu. * Displays the list used previously. (Q. Settings) * Displays the [All Settings] menu. (Up/Down/Left/Right) Press the up, down, left or right button to scroll the menu. If you press buttons while the pointer is in use, the pointer will disappear from the screen and Magic Remote will operate like a general remote control. To display the pointer on the screen again, shake Magic Remote to the left and right. Wheel (OK) Press the center of the Wheel (OK) button to select a menu.
To Register the Magic Remote Control To use the Magic Remote control, register it with your projector first. 1 2 Put batteries into the Magic Remote and turn the Projector on. ENGLISH Point the Magic Remote at your projector and press the Wheel (OK) on the remote control. • If the projector fails to register the Magic Remote, try again after turning the projector off and back on.
Using the Magic Remote Control CAUTION • Use the remote control within the specified range (within 10 m). You may experience communication failures when using the device outside the coverage area or if there are obstacles within the coverage area. • You may experience communication failures depending on the accessories. Devices such as a microwave oven and wireless LAN operate in the same frequency band (2.4 GHz) as the Magic Remote. This may cause communication failures.
USING THE PROJECTOR Focus of the Screen Image ENGLISH When an image appears on the screen, check if it is in focus and fits the screen properly. Focus Ring • To adjust the focus of the image, rotate the focus ring. • Make sure the product does not move when adjusting the focus.
Watching With the Projector 1 Select the (INPUT) (POWER) button to turn the projector [All Inputs] and select the input signal you want. Control the projector using the following buttons while watching projector. Button Description Moves to the previous/next page. Adjusts the volume level. (MUTE) 4 Mutes the sound from the projector. To turn the projector off, press the (POWER) button. ENGLISH 2 3 When in standby mode, press the on.
CONNECTING DEVICES You can connect various external devices to the projector.
HDMI Connection Connecting to HD Receiver, DVD, or External Devices With an HDMI cable, you can enjoy high quality picture and sound. Using a HDMI cable, connect the port of the projector to the HDMI output port of the device to connect. Both video and audio are output at the same time. Optional Extras ENGLISH Connect an HD receiver, DVD, or external devices to the projector and select an appropriate input mode. You can connect with any HDMI input port.
Connecting a PC ENGLISH The projector supports Plug and Play. Your PC will automatically detect the projector and requires no driver installation. Using an HDMI cable, connect the port of the projector to the HDMI output port of your PC. Both video and audio are output at the same time.
Connecting a Laptop You can connect the projector to a laptop to use various functions. The table below shows examples of switching the output. For more information, refer to the External Output, Connecting to an External Monitor, or similar sections of the owner’s manual of your computer. Brand Switching Output Lenovo HP Dell Acer ASUS Optional Extras LG Samsung Apple Adjust the control panel to enable mirroring after start-up.
Connecting Headphones You can listen to the audio through a headphone.
Connecting a Digital Amp Optional Extras • Refer to the user manual of the audio device to connect. • When connecting this product to other devices, make sure to turn off and unplug all the devices. • The audio output of this product has wide-ranging audio bandwidth, so the receiver volume must be adjusted properly. Speakers can be damaged by unexpected high frequencies.
Connecting a smart device (smartphone, tablet, etc.) ENGLISH • (INPUT) [All Inputs] [HDMI1]/[HDMI2] • The picture may look different from the actual product. Connect a smart device to the projector using a cable1) and set the external input of the projector to HDMI. The smart device screen will then be displayed through the projector. You can connect with any HDMI input port. For model-specific instructions regarding use of the wired connection, please check with the smart device manufacturer.
MAINTENANCE Clean your Projector to keep it in optimal condition. Cleaning the Lens/Mirror • If there is any dust or staining on the lens /mirror surface, you must clean the lens. • To remove dust or stains on the lens/mirror, use a compressed air duster, cotton swab, or soft cloth to gently wipe the lens. • Do not wipe the lens/mirror while the product is in use or immediately after it has been turned off.
SPECIFICATIONS HF65LS (HF65LS-EU) HF65LSR (HF65LSR-EU) MODEL ENGLISH Resolution (Pixel) 1920 (Horizontal) × 1080 (Vertical) Aspect ratio 16:9 (Horizontal:Vertical) Projection distance -- Screen size 414 mm to 686 mm -- 1524 mm to 2540 mm (60 inches to 100 inches) Ratio of upward projection 125 % 100 W Power consumption Networked standby: 1.3 W (If all network ports are activated.) AC-DC Adaptor Manufacturer: Honor Model: ADS-110CL-19-3 190110G 19 V 5.
HDMI (DTV) Supported Mode Resolution 720 x 480p 720 x 576p 1280 x 720p 1920 x 1080i 1920 x 1080p Vertical Frequency (Hz) 31.46 59.94 31.50 60.00 31.47 59.94 31.50 60.00 31.25 50.00 44.96 59.94 45.00 60.00 37.5 50.00 28.12 50.00 33.72 59.94 33.75 60.00 26.97 23.97 27.00 24.00 33.71 29.97 33.75 30.00 56.25 50.00 67.43 59.94 67.50 60.
HDMI (PC) Supported mode ENGLISH Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) 640 x 350 31.46 70.09 720 x 400 31.46 70.08 640 x 480 31.46 59.94 800 x 600 37.87 60.31 1024 x 768 48.36 60.00 1152 x 864 54.34 60.05 1280 x 1024 63.98 60.02 1360 x 768 47.71 60.01 1920 x 1080 67.5 60.00 • If an invalid signal is input into the projector, it will not be displayed properly on the screen or a message such as [No Signal] or [Invalid Format] will be displayed.
Open Source Software Notice Information ENGLISH To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is contained in this product, please visit http://opensource.lge.com. In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download.
SYMBOLS Refers to alternating current (AC). ENGLISH Refers to direct current (DC). Refers to class II equipment. Refers to stand-by. Refers to “ON” (power). Refers to dangerous voltage.
ABOUT LG PROJECTOR Image shown may differ from your projector. Your projector’s OSD (On Screen Display) may differ slightly from that shown in this manual. [ ] : the buttons and the text to be displayed on the projector screen. P/NO : SAC37813517 (1901-REV00) Copyright © 2019 LG Electronics Inc. All Rights Reserved.
2 CONTENTS ABOUT LG PROJECTOR 4 ENGLISH Home Tutorial 4 -- Using the Home feature of the LG Projector 4 Network Setting -- Network Setting 8 8 HOW TO OPERATE PROJECTOR 10 Using the Screen Remote 10 Setting Universal Control 12 Launching Apps through [QUICK ACCESS] 13 -- Using apps quickly and easily with [QUICK ACCESS] 13 SIMPLINK (HDMI-CEC) -- Using SIMPLINK 15 15 HOW TO USE VARIETY OF CONTENTS 22 LG Content Store 22 Creating Wish List -- Using [My Content] 23 23 Account Creating -- Creat
3 Connecting USB 44 -- Tips for Using a USB storage device 45 48 60 Quick Settings 60 -- To use Setting function quickly 60 [Picture] Settings 61 [Sound] Settings 68 [Network] 75 77 Share Smartphone Screen -- To see the Mobile Device's screen on the projector 48 [General] Share Computer Content -- What Is Content Share? 49 49 [Safety] Settings 85 [Accessibility] 86 Share Computer Screen 52 -- To see the PC screen on the projector 52 TO UPDATE SOFTWARE 87 TROUBLESHOOTING 88 BENEFITS
4 ABOUT LG PROJECTOR Home Tutorial ENGLISH Using the Home feature of the LG Projector You can open the Home screen by pressing the button on your remote control. You can combine frequently used apps on a single screen and use whichever you want at any time. 1 2 3 4 Description Launch [SEARCH]. 1 You can switch to another input or change your settings. You can easily change the settings of your projector. Select for advanced setup. 2 Add content you like to use, easily and quickly.
5 Using Recent List To access the list of recently used apps, press and hold the button on your remote control, or press and hold a recently used item on the Home screen. You can run or exit all the apps you’ve used recently. ENGLISH 1 Description 1 Exit the app.
6 Managing Apps You can view a list of all apps installed on your projector, change their positions, or delete them. • Some apps cannot be edited. ENGLISH 1 2 3 Select the app you want to edit, and press and hold the Wheel (OK) or OK button on the Remote Control. This will activate the app edit mode. To move the app to your desired position, go to the position and press the Wheel (OK) or OK button. To delete an app, select the above the app.
7 Stopping the current function ENGLISH 1 2 3 Press the button on the remote control. Select the application name at the top left corner of the screen by the Remote Control to display the Close icon. Select the Close icon displayed next to the application name to quit the function in use.
8 Network Setting Network Setting ENGLISH If you configure settings for the network, you can use various services such as online contents and applications. Setting a Wired Network 1 2 Connect the LAN port of the projector and the router using a LAN cable. The router should be connected to the Internet beforehand. Press the (Q. Settings) button on the remote control and select [Network] [Wired Connection (Ethernet)]. This will start the wired network connection.
9 Network Setting Warnings ENGLISH • Use standard LAN cable (connect to Cat7 or higher with RJ45 connector, 10 Base-T, or 100 Base TX LAN port). • Resetting the modem may fix some network connection problems. Turn the power OFF, disconnect and reconnect it, and then turn the power on to solve the problem. • LG Electronics is not responsible for any network connection problems or any faults, malfunctions, or errors caused by network connection.
10 HOW TO OPERATE PROJECTOR Using the Screen Remote ENGLISH You can control external devices connected to your projector by using the Screen Remote displayed on your projector screen. • This feature is available on certain models only. 1 2 Press the button on the Magic Remote. Using the Magic Remote, select your desired button on the Screen Remote displayed on your projector screen.
11 Description 2 You can capture your projector screen. • This feature is available on certain models only. • You can view/delete screen-captured images in the [Photo & Video] app. 3 The buttons suitable for the selected device appear. 4 You will see more remote control buttons. 5 You can start the [Device Connector] app. You can set the universal remote control. 6 You can change the position of the screen remote control. • This feature can only be used with the Magic Remote.
12 Setting Universal Control You can control devices such as Set-Top Box, Blu-ray Player, or Home Theater using by Magic Remote. • This feature is available on certain models only. ENGLISH 1 2 3 4 5 • • • • • • • • • • • Check that the device you want to set is connected to your projector. Press the (Press the button on the remote control and select button on the remote control.) at the top right. Select [All Inputs] and go to [INPUTS].
13 Launching Apps through [QUICK ACCESS] Using apps quickly and easily with [QUICK ACCESS] Setting the [QUICK ACCESS] 1 2 3 Launch the app or input you wish to assign. Press and hold the number button (1~9) you want to register. When the registration pop-up window appears, select [Yes]. • If you press and hold a number button that has already been registered, the registered function will be performed.
14 Checking and editing QUICK ACCESS Press and hold the number 0 button on the remote control. The [QUICK ACCESS] edit screen appears. ENGLISH 4 1 2 3 Description 1 Selecting a number that has already been registered allows deregistering it. 2 When you select a number that has not been registered, items that can be registered will be shown. 3 An item that has been registered to a different number is indicated with a check mark. 4 You can view a brief instruction for this function.
15 SIMPLINK (HDMI-CEC) Using SIMPLINK 1 2 3 4 5 Connect the SIMPLINK HDMI Output port to the projector’s HDMI IN port with an HDMI cable. Press the [General] (Q. Settings) button on the remote control and select [SIMPLINK (HDMI-CEC)]. Set [SIMPLINK (HDMI-CEC)] to [On]. Configure the [Auto Power Sync] settings to [On] or [Off]. (If [Auto Power Sync] is set to [On], turning on a SIMPLINK-linked device will turn the projector on. When you turn off the projector, the device will also be turned off.
16 Supported SIMPLINK Functions ENGLISH • Instant Play When you start a multimedia device, you can immediately watch content from the device on the projector without having to control anything. • Controlling devices with the projector remote control Enables the user to control multimedia devices with the projector remote control to watch content. -- The pointer function of the Magic Remote can be limited.
17 Using the LG TV Plus App You can control the functions of your projector by using the app installed on your smart device. 1 2 3 4 5 6 7 8 Download LG TV Plus app from the app store of your smart device. Press the [Network]. (Q. Settings) button on the remote control and select Set [LG Connect Apps] to [On]. Connect the projector and your smart device on the same Wi-Fi network. Run the LG TV Plus app installed on your smart device.
18 Controlling Your Projector with the LG TV Plus App You can tap the buttons on your smart device’s screen to control the projector. 1 2 3 ENGLISH Description 1 You can use the same functions as the Magic Remote’s pointer and arrow keys. 2 You can adjust the volume or make other adjustments without using the remote control. 3 You can open an app installed on your Projector or configure settings for functions such as switching input. • Some controls may be limited in external input mode.
19 Mobile Connection Using Mobile Connection Connecting a Smart Device with Mobile Connection Set up a connection following the guide below: 1 2 3 4 5 Install the LG TV Plus app on the smart device. Connect both your projector and the smart device to the same network. Run the LG TV Plus app and set up a connection to your projector following the instructions shown on the screen. Press the button, and a list of connected smart devices will appear on the right side of the screen.
20 Using a Keyboard and Mouse Using a USB Wired/Wireless Mouse ENGLISH Connect your mouse to the USB port. Use the mouse to move the pointer on the projector screen and select the menu you want. • The right button and the special buttons on the mouse do not work. • When using a wireless USB mouse/keyboard, the experience may be affected by the distance and wireless condition. Using a USB Wired/Wireless Keyboard Connect your keyboard to the USB port. You can enter text with the connected keyboard device.
21 Using a Gamepad ENGLISH Connect your gamepad to the USB port on the projector if the game requires a gamepad. • It is recommended that you use a gamepad that has been tested for compatibility with LG projectors.
22 HOW TO USE VARIETY OF CONTENTS LG Content Store ENGLISH You can download and use apps from various categories such as education, entertainment, lifestyle, news, and games. 1 2 • • • • • Press the button on the remote control. Launch the [LG Content Store] application. This feature is available in certain countries only. Features may be limited in certain countries. Content may differ depending upon the model or country. Exercise caution when used by children.
23 Creating Wish List Using [My Content] 1 2 3 4 5 • • • • • Press the button on your remote control. Select [My Content] in the top left of the screen. Select [Add Content]. Search for content. Select your desired content from the search results to add it to [My Content]. • You can also select from among recommended content shown under the search box and directly add it to [My Content]. This feature is only available in certain countries.
24 Account Creating Creating LG Account ENGLISH In [Account Management], you can use your email address to create a new LG account. 1 2 3 4 5 6 Press the [General] (Q. Settings) button on the remote control and select [Account Management]. Select [CREATE ACCOUNT]. Read and accept the Terms of Service. Enter an ID and a password. Your ID must be your email address. Enter your birthday. Select [OK]. Go to your email to verify your email address. Please verify your email before the time expires.
25 Account Management Managing your LG Account 1 2 Press the Go to (Q. Settings) button on the remote control. [General] [Account Management] to log in. Personal Information You can view or edit your information of the account currently logged in. You can change the password or press [EDIT] to edit your personal information. This feature is available in certain countries only. ENGLISH You can manage the information of your LG account.
26 Search Content [Search] ENGLISH [Search] allows you to find and use a variety of content and information. You can search for files, including image, video, audio files. Searching for Content 1 2 Run [Search] by pressing the (SEARCH) button on your remote control. Search for a variety of content and information by typing in your desired search terms. 1 2 Description 1 Enter your desired search term. 2 Change the settings of the features provided by [Search].
27 Use App & Contents Installing Apps 1 2 3 4 5 6 Press the button on the remote control. Launch the [LG Content Store] application. Select your desired category from the categories shown at the top of the screen. The list of available apps in the selected category will be shown. Select an app to set up from the list. Read the details of the app and then press [Install]. When the installation is complete, you can run the app immediately.
28 Watching VOD Content You can immediately enjoy dramas, movies, and more with real-time streaming. ENGLISH 1 2 3 4 5 Press the button on the remote control. Launch the [LG Content Store] application. Select your desired category from the categories shown at the top of the screen, such as TV Shows and Movies. The list of available content in the selected category will be shown. Select an item from the list. You can play your desired content. An app may be required to play the content.
29 PLAY OTHER DEVICE FILES [Photo & Video] You can view photos and videos using the [Photo & Video] app. 1 2 3 4 Press the button on your remote control. Launch the [Photo & Video] application. Select your desired storage device. Select and view your desired photo or video. 1 23 4 Description 1 Select your desired type of content and viewing method. 2 Select and delete your desired content. (You cannot delete files that are shared from other devices.) 3 Select the content you want to play.
30 Photo Player Selecting a photo in the [Photo & Video] app runs the photo player. You can view your saved photos. ENGLISH 1 2 3 4 5 6 Description 1 Returns to the entire content list. 2 You can play background music by running the music player. 3 You can zoom the photos in/out. 4 Starts the slide show. 5 Rotates photos. 6 You can set the size of a photo or change the speed and effect of a slide show.
31 Supported Photo Files File type Format Resolution JPEG .png PNG Minimum: 64 x 64 Maximum: 5760 (W) x 5760 (H) .bmp BMP Minimum: 64 x 64 Maximum: 1920 (W) x 1080 (H) ENGLISH .jpeg .jpg .
32 Video Player Selecting a video in the [Photo & Video] app runs the video player. You can view your saved videos. ENGLISH 1 2 3 4 5 Description 1 Returns to the entire content list. 2 You can select other content by displaying the playlist while watching a video. 3 You can control basic video playback functions. 4 By zooming in the projector display, you can view images in a larger size than the originals. 5 You can set additional options.
33 Setting Additional Options ENGLISH 1 2 3 4 5 Description 1 You can change subtitle settings. 2 You can set audio tracks. 3 You can set continue watching to resume playing from the last viewed scene. 4 You can set continuous playback. If continuous playback is set, the next video is automatically played after the playback of a video is over. 5 Returns to the basic operation screen.
34 Supported Video Files Maximum data transfer rate: ENGLISH • Full HD video H.264 1920 x 1080@60P BP/MP/HP@L4.2 40 Mbps HEVC 1920 x 1080@60P MP@L4.1, Main10 Profile@L4.1 40 Mbps Supported external subtitles: *.smi, *.srt, *.sub (MicroDVD, SubViewer 1.0/2.0), *.ass, *.ssa, *.txt (TMPlayer), *.psb (PowerDivX), *.
35 Supported video codecs Extension Codec VC-1 Advanced Profile (except for WMVA), VC-1 Simple and Main Profiles Audio WMA Standard (except for WMA v1/ WMA Speech) Video Xvid (except for 3 warp-point GMC), H.264/AVC, Motion Jpeg, MPEG-4 Audio MPEG-1 Layer I, II, MPEG-1 Layer III (MP3), Dolby Digital, LPCM, ADPCM, DTS .mp4 .m4v .mov Video H.264/AVC, MPEG-4, HEVC Audio Dolby Digital, Dolby Digital Plus, AAC, MPEG-1 Layer III (MP3), Dolby AC-4 .3gp .3g2 Video H.
36 Cautions for Video Playback ENGLISH • Some user-created subtitles may not work properly. • A video file and its subtitle file must be located in the same folder. For subtitles to be displayed properly, make sure that the video file and the subtitle file have the same name. • Subtitles on a Network Attached Storage (NAS) device may not be supported depending on the manufacturer and model. • Streams that include Global Motion Compensation (GMC) and Quarterpel Motion Estimation (Qpel) are not supported.
37 [Music] Playing Music 1 2 3 4 Press the button on your remote control. Launch the [Music] application. Select your desired storage device. You can select your desired songs from all of your storage devices and add them to [MY PLAYLIST]. Select your desired music content and enjoy it. 1 2 345 Description 1 Select the desired type of content list. 2 Select and delete content. (Files shared from other devices cannot be deleted.) 3 Select content and add it to [MY PLAYLIST].
38 Using the Music Player The music player lets you choose music from other apps and use it as background music. ENGLISH 1 2 3 4 5 6 7 Description 1 You can play music from the selected storage device. 2 You can set repeat playback and random playback. 3 You can listen to music with the screen turned off.
39 Description You can change the position of the music player. 5 You can minimize the music player. 6 This feature closes the music player. 7 Lyrics are available for music files that provide them. In some music files, you can choose a lyric section and move the playback position. • The lyrics feature is only supported on some devices. • The lyrics may not be displayed in sync depending on the lyrics data in the music file. • Reopen your music player by pressing the buttons on your remote control.
40 Audio Format File Format ENGLISH .mp3 .wav .ogg .wma .flac Item Info Bit rate 32 kbps ~ 320 kbps Sample freq. 16 kHz ~ 48 kHz Support MPEG-1, MPEG-2 Channels mono, stereo Bit rate - Sample freq. 8 kHz ~ 96 kHz Support PCM Channels mono, stereo Bit rate 64 kbps ~ 320 kbps Sample freq. 8 kHz ~ 48 kHz Support Vorbis Channels mono, stereo Bit rate 128 kbps ~ 320 kbps Sample freq. 8 kHz ~ 48 kHz Support WMA Channels up to 6 ch Bit rate - Sample freq.
41 [File Viewer] Viewing Files 1 2 3 4 Press the ENGLISH You can see document files stored on a connected device. button on your remote control. Launch the [File Viewer] application. Select your desired storage device. Select and view your desired document file. 1 2 Description 1 Select your desired type of content and viewing method. Select and delete your desired content. (You cannot delete files that are shared from other devices.
42 Browsing File Viewer ENGLISH 1 2 3 4 5 6 Description 1 Returns to the entire content list. 2 Moves to the page you specify. 3 Sets the slide show. 4 Enlarges or reduces the document. 5 Starts the slide show. 6 Rotates the document. 7 Sets up the options of File Viewer.
43 Supported File Formats File Extension XLS, XLSX PPT, PPTX Microsoft Office 97/2000/2002/2003/2007/2010/ 2013/2016 version TXT - PDF Adobe PDF 1.0/1.1/1.2/1.3/1.4 version HWP Hangul 2007 version • File Viewer realigns a document, so it may look different from what is displayed on a PC. • For documents that include images, the resolution may look lower during the realigning process. • If the document is large or has many pages, it may take longer to load.
44 Connecting USB Connect a USB storage device (USB HDD, USB Flash Drive) to the USB port on the projector to enjoy the content files stored on the USB storage device on your projector.
45 Tips for Using a USB storage device ENGLISH • A USB storage device that has a built-in automatic recognition program or uses its own driver might not be recognizable. • Some USB storage devices may not be supported or may not work properly. • If you use a USB extension cable, the USB storage device may not be recognized or may not work properly. • Please use only USB storage devices formatted with the FAT32 or NTFS file system provided by Windows OS.
46 Share Smart Phone Content Share with Smartphone ENGLISH Content Share allows you to enjoy videos, music, and photos saved on your Smartphone that is connected to the same network. Connecting to a smartphone with your projector 1 2 3 4 Press the button on the remote control. Launch the [Device Connector] application. Select the [Smartphone]. Follow instructions in [Device Connector].
47 Matters that require special attention during Content Share ENGLISH • Check your network settings if the Content Share option does not work properly. • May not work properly on a wireless network. It is recommended that you connect to a wired network. • May not work properly depending upon the network environment. • If multiple display devices are connected to one device, the content may not be played properly depending upon server performance.
48 Share Smartphone Screen To see the Mobile Device's screen on the projector ENGLISH 1 2 3 4 5 • • • • • • Enable Miracast mode on the mobile device. Your projector will be displayed in the list of available devices. Select your projector and request connection. To start the connection; a message saying “Connecting...” will appear. After the connection is established, the projector will display the screen of the connected device.
49 Share Computer Content What Is Content Share? Play the content with sharing software on the PC If you have Windows 7 or later installed on your PC, you can play music, video, photos, etc. on your projector without needing to install a separate program. 1 2 Connect you projector and PC to the same network. PCs installed with Windows 7 or later also need to be connected to a network.
50 Use the SmartShare PC Software to play the content saved on the PC You can use SmartShare PC Software to connect the music/videos/photos saved on the PC to your home network and play them on your projector. 1 ENGLISH 2 3 4 Configure the projector and PC installed with SmartShare on the same network. • The SmartShare service is only available when the projector and server PC are connected to a single router. Download and install SmartShare PC Software from the LG website.
51 Matters that require special attention during Content Share ENGLISH • Check your network settings if the Content Share option does not work properly. • May not work properly on a wireless network. It is recommended that you connect to a wired network. • If multiple display devices are connected to one device, the content may not be played properly depending on server performance. • May not work properly depending on the network environment.
52 Share Computer Screen To see the PC screen on the projector ENGLISH Connect wireless 1 2 3 4 5 • • • • • • • • Press the button on the remote control. Run the [Screen Share] app. Launch Miracast on the PC. Your projector will be displayed in the list of available devices. Select your projector and request connection. After the connection is established, the projector will display the screen of the connected device.
53 BENEFITS OF SMART PROJECTOR Zooming in the Projector Display 7 6 5 4 1 3 2 Description 1 The original screen before enlargement is displayed on the subscreen. 2 This indicates the enlarged area that is displayed on the main screen. 3 You can zoom in and out on the main screen using the magnification bar. You can adjust the magnification by scrolling with the Wheel (OK) button on the Magic Remote. 4 You can hide the sub screen.
54 Description ENGLISH 5 You can capture your current screen. You can view captured images in the [Photo & Video] app. 6 You can pause or resume your current screen. 7 Close the function and return to the original screen. • To exit the feature and return to the original screen, press • If you run another app on an enlarged screen, the feature closes. or . Moving the Position of an Enlarged Screen • Method 1.
55 Enjoying Internet Using the [Web Browser] 1 2 Press the button on the remote control. Launch the [Web Browser] application. 1 2 3 4 6 7 5 Description 1 You can add the current page to the Home screen, or add or delete the current page in [Bookmarks]. (A page added to the home screen can only be deleted on the home screen. In this case, it is not deleted from [Bookmarks].) 2 Reloads the current page. 3 You can turn on/off Mini TV.
56 Description Zooms in or out of the screen. 5 [History] : You can open or delete the history list. [Bookmarks] : You can open or delete the bookmark list. [Settings] : You can configure simple settings for the browser. [Encoding] : You can change the language when the content is not properly displayed on the web page. 6 You can use the browser in full screen mode. To go back to the original screen, use the Remote Control to move the pointer to the top of the screen. [Exit Full Screen] will display.
57 Setting the [Web Browser] ENGLISH Press at the top of the screen and select the [Settings]. • [On Startup] You can set the startup page of the browser to [Open the New Tab page]/ [Continue where I left off]/[Home page:]. • [Search Engines] You can select the default search engine. • [Recommended Sites] You can change the settings so that [Recommended Sites] are displayed. The [Recommended Sites] and [Most Visited Sites] are displayed on a new tab.
58 Playing Sound from a Smart Device through the Projector’s Speakers Connect a smart device to the projector via Bluetooth to play sound from the smart device through the projector’s speakers. ENGLISH 1 2 3 4 Press the button on the remote control. Launches [Bluetooth Audio Playback]. Turn the smart device’s Bluetooth on, then select the projector from the list of devices. The projector will be connected to the smart device.
59 Notifications Using [Notifications] 1 2 Press the button on the remote control. Launch the [Notifications] application. 3 4 2 1 Description 1 You can delete notifications. 2 For notifications with long content, press [more] to open them in full view. 3 You can delete all notifications. 4 You can launch the APP or move to URL. ENGLISH The [Notifications] transfers real-time notifications from various apps and LG services.
60 TOUR LIST OF SETTINGS The options may differ depending on the model. ENGLISH Quick Settings To use Setting function quickly Press the (Q. Settings) button on the remote control. Displays a set of light-weight controls quickly and simply such as [Picture Mode], [Aspect Ratio], [Sound Out] and so on. 1 2 3 4 5 6 7 8 Description 1 Closes the Quick settings. 2 You can set the [Picture Mode]. 3 You can set the [Aspect Ratio]. 4 You can choose the [Sound Out]. 5 You can set the [Sleep Timer].
61 [Picture] Settings [Picture Mode] ENGLISH (Q. Settings) [Picture] [Picture Mode Settings] [Picture Mode] Select the picture mode that is best suited to your viewing environment, preferences or video type. The options may differ depending on the model. Depending upon the input signal, the available picture modes may be different. When watching online service content, the Picture Mode may be changed to match the content being shown.
62 [Picture Mode Settings] ENGLISH (Q. Settings) [Picture] [Picture Mode Settings] This feature allows you to adjust the selected picture mode in detail. • [Contrast] Adjusts the contrast of the bright and dark areas of the picture. The closer to 100, the higher the contrast. • [Brightness] Adjusts the overall screen brightness. The closer to 100, the brighter the screen. • [Sharpness] Adjusts the sharpness of the image. The closer to 50, the sharper and clearer the image.
63 [Advanced Controls]/[Expert Controls] ENGLISH Adjust screen settings for individual picture modes. (Q. Settings) [Picture] [Picture Mode Settings] [Advanced Controls] • [Dynamic Contrast] Corrects the difference between the bright and dark areas of the screen for optimal results depending on the brightness of the picture. • [Dynamic Colour] Adjusts the colour and saturation of the picture to make the image more colourful and lively.
64 ENGLISH (Q. Settings) [Picture] [Picture Mode Settings] [Expert Controls] If you set the picture mode to Expert, you can set the following functions. • [Dynamic Contrast] Corrects the difference between the bright and dark areas of the screen for optimal results depending on the brightness of the picture. • [Super Resolution] Adjusts the resolution to make dim and blurred images clearer. • [Colour Gamut] Selects the range of colours to display.
65 [Picture Options] ENGLISH (Q. Settings) [Picture] [Picture Mode Settings] [Picture Options] Adjust detailed settings to further optimize the picture. • [Noise Reduction] Removes small dots that stand out so as to make the image clean. • [MPEG Noise Reduction] Reduces the noise produced during the creation of digital video signals. • [Black Level] Compensates the screen brightness and contrast by adjusting the darkness of the screen. • [TruMotion] This feature is available on certain models only.
66 [Aspect Ratio] ENGLISH (Q. Settings) [Picture] [Aspect Ratio Settings] [Aspect Ratio] The options may differ depending on the model. Depending upon the input signal, the available screen sizes may be different. • [16:9] Displays an aspect ratio of 16:9. • [Original] Changes the aspect ratio to 4:3 or 16:9 depending upon the input video signal. • [4:3] Displays an aspect ratio of 4:3.
67 [Energy Saving] [Picture Test] (Q. Settings) [Picture] [Picture Test] First of all, start the Picture Test to see whether the video signal output is normal, and then select whether there is an error. If there are no problems in the test picture, check the connected external device. ENGLISH (Q. Settings) [Picture] [Energy Saving] Reduces power consumption by adjusting peak screen brightness. • [Off]/[Minimum]/[Medium]/[Maximum] Applies the pre-set [Energy Saving] mode.
68 [Sound] Settings [Sound Mode] ENGLISH (Q. Settings) [Sound] [Sound Mode Settings] • [Standard] Optimizes the sound for all types of content. • [Cinema] Optimizes the sound for cinemas. • [Clear Voice III] Boosts voice clarity. • [Sports] Optimizes the sound for sports. • [Music] Optimizes the sound for music. • [Game] Optimizes the sound for gameplay.
69 [Sound Mode Settings] ENGLISH (Q. Settings) [Sound] [Sound Mode Settings] You can only use [Virtual Surround Plus], [Equalizer], and [Reset] if [Sound Mode] is set to [Standard]. The options may differ depending on the model. • [Sound Mode] You can select the most suitable sound mode for each genre. • [Balance] You can adjust the volume of the left and right speakers. • [Virtual Surround Plus] Enjoy an immersive soundscape with the virtual multi-channel surround sound effect.
70 [Sound Out] The options may differ depending on the model. ENGLISH Playing audio through the projector's internal speakers (Q. Settings) [Sound] [Sound Out] [Internal Projector Speaker] Audio is played through the projector’s internal speakers. Connecting and Using an Audio Device Supporting Optical (Q.
71 Sound Input [Auto] [PCM] Digital Sound Output MPEG PCM Dolby Digital Dolby Digital Dolby Digital Plus (Optical) Dolby Digital (HDMI ARC) Dolby Digital Plus HE-AAC Dolby Digital DTS DTS / PCM DTS Express DTS / PCM DTS-HD MA PCM / DTS All PCM Connecting and Using an Audio Device Supporting LG Sound Sync (Q.
72 ENGLISH Connecting and Using an Audio Device Wirelessly (Q. Settings) [Sound] [Sound Out] [Bluetooth] You can connect wirelessly a Bluetooth audio device or a Bluetooth headset to enjoy your projector’s sound in richer quality and greater convenience. • If you have recently connected device that the sound bar supports LG Sound Sync, this feature automatically tries connecting to that device.
73 Playing audio through the projector’s internal speakers and external audio device simultaneously Audio can be played through multiple devices simultaneously. • Using [Internal Projector Speaker + Optical] (Q. Settings) [Sound] [Sound Out] [Internal Projector Speaker + Optical] -- Audio is played through the projector’s built-in speakers and the audio device connected to the digital optical audio output port simultaneously. • Using [Internal Projector Speaker + Wired Headphones] (Q.
74 [Auto Volume] (Q. Settings) [Sound] [Auto Volume] Click [On] to adjust the volume level automatically. This feature is available on certain models only. ENGLISH [AV Sync Adjustment] (Q. Settings) [Sound] [AV Sync Adjustment] Adjusts the synchronization of the sound from the speaker that is working. The closer to (+), the slower the audio output. If you select the [Bypass], Outputs the sound from external devices without any audio delay.
75 [Network] [Projector Name] [Wired Connection (Ethernet)] (Q. Settings) [Network] [Wired Connection (Ethernet)] The projector will be connected automatically to the network if a cable connection is established. To change network connection settings, select [Edit] in Network Settings. [Wi-Fi Connection] (Q. Settings) [Network] [Wi-Fi Connection] If you have set up the projector for a wireless network, you can check and connect to the available wireless Internet networks.
76 [Wi-Fi Direct] ENGLISH (Q. Settings) [Network] [Wi-Fi Direct] [Wi-Fi Direct] is a function that allows your projector to connect with a Wi-Fi Direct-enabled device without a Wireless Router. You can open files stored on the devices that are connected via Wi-Fi Direct in the [Photo & Video] app and the [Music] app. 1 2 3 4 5 6 Enable Wi-Fi Direct on the device to which you want to connect. A list of devices that can be connected to the projector is displayed. Select a device to connect.
77 [General] [Language] [Location] (Q. Settings) [General] [Location] You can change the location setting of your smart projector. You must set the country manually when you are not connected to the network. The configurable items differ depending upon the country. • [Service Area Postcode] This function is used to set the receiving location of the projector by entering your postcode. • [LG Services Country] If you don’t set the [Set Automatically], you can select the country manually. ENGLISH (Q.
78 [Time & Date] ENGLISH (Q. Settings) [General] [Time & Date] You can check or change the time while watching the projector. • [Set Automatically] Automatically sets the time displayed on the projector screen by network. • [Time]/[Date]/[Time Zone] You can set the time and date manually if the automatically set current time is incorrect. • [Custom Time Zone] When select the [Custom] in [Time Zone], [Custom Time Zone] menu is activated. [Sleep Timer] (Q.
79 [Account Management] (Q. Settings) [General] [Account Management] Manage your account information and settings. • This feature is available on certain models only. (Q. Settings) [General] [Eco Mode] Set power options to reduce energy consumption. • [Auto Power Off] Set the projector to turn off automatically when there has been no user input for a specified amount of time.
80 [Mobile Projector On] ENGLISH (Q. Settings) [General] [Mobile Projector On] If [Turn on via Wi-Fi] or [Turn on via Bluetooth] is set to [On], you can turn on your projector using an application that supports [Mobile Projector On] or see the screen of the application on your projector. • The [Turn on via Wi-Fi] feature must be used in an app on a smart device that supports the feature. • The [Turn on via Bluetooth] feature can only be used with certain LG Electronics smartphones.
81 [Edge Adjustment] [PJT Mode] (Q. Settings) [General] [PJT Mode] This function turns the projected image upside down or flips horizontal. [Auto Keystone] (Q. Settings) [General] [Auto Keystone] This feature is available on certain models only. [Auto Keystone] provides a rectangular screen image by automatically adjusting the keystone number when there is a trapezoidal screen image caused by tilting of the projector.
82 [Auto Power] ENGLISH (Q. Settings) [General] [Auto Power] Makes the projector turn on automatically when the power cord is connected to the projector. • [On] When the power code is connected to the projector, it turns on automatically. • [Off] When the power code is connected to the projector, it goes into standby mode. [High Altitude] (Q. Settings) [General] [High Altitude] If the projector is used at an altitude higher than 1200 meters, turn this on.
83 [Settings Help] (Q. Settings) [General] [Settings Help] If you select the setting menus, you will see the hints of the settings. Turn on/off description box in settings. (Q. Settings) [General] [Screen Saver] When the currently displayed app has not received any user input for an hour, it will be replaced by a [Screen Saver]. [Reset to Initial Settings] (Q. Settings) [General] [Reset to Initial Settings] Return projector to its initial settings. This will revert all settings to their default values.
84 [Self Diagnosis] (Q. Settings) [General] [Self Diagnosis] Troubleshoots functional problems that can arise while using the product. ENGLISH [User Agreements] (Q. Settings) [General] [User Agreements] Review legal documents and accept or decline their terms of service. [Legal Notice] (Q. Settings) Review legal notice. [General] [Legal Notice] [Home/Store Mode] (Q. Settings) [General] [Home/Store Mode] You can choose between [Home Mode] and [Store Mode].
85 [Safety] Settings [Application Locks] (Q. Settings) [Safety] [Application Locks] Select the Applications to lock. You can lock or unlock the application. • The lock function is not immediately available for the currently running application. [Input Locks] (Q. Settings) [Safety] [Input Locks] You can lock or unlock the Input Locks. Select the Inputs to lock. [Reset Password] (Q. Settings) [Safety] [Reset Password] Set or change the password for the projector.
86 [Accessibility] [Pointer Options] ENGLISH (Q. Settings) [Accessibility] [Pointer Options] You can set the pointer speed and shape you want while it is on the screen. [Menu Transparency] (Q. Settings) [Accessibility] [Menu Transparency] By setting this feature to [On], you can make some of the menus (e.g. Live Menu, Search, Screen Remote, etc.) transparent. [High Contrast] (Q.
87 TO UPDATE SOFTWARE Uses software update to check and obtain the latest version. (Q. Settings) [General] [About This Projector] [Allow Automatic Updates] Description When checking for the latest update version, you can perform updates only if an update file of a later version is available. The projector automatically checks your software version but, if necessary, you can perform a manual check.
88 TROUBLESHOOTING ENGLISH If you experience any of the problems below while using the product, please check the following. There may be no problem with the product. Information on customer service for product problems is available in (Q. Settings) [General] [About This Projector] on the projector. Abnormal Operation The screen does not appear for some time after power-on. • This is because there is a noise-removal process to eliminate any possible noise that may appear during power-on.
89 Screen Problems The screen shakes after the momentary appearance of vertical/horizontal lines and net pattern. • Stop using items such as wireless telephones, hairdryers, electrical drills etc. The problem is caused by high-frequency electronic devices such as another projector or strong electromagnetic sources. I see vertical lines in all four directions on the screen, or colours are blurred when I try to connect to HDMI. • (Q.
90 Sound Problems ENGLISH First of all, perform a (Q. Settings) [Sound] [Sound Test] to check for any abnormalities in the projector. If you are using a set-top box, turn it off, and then turn it back on. Make sure that the set-top box is correctly connected to your projector. The screen is fine, but it does not play any sound. • (Q. Settings) [Sound] [Sound Out] Check whether the [Sound Out] is set to [Internal Projector Speaker + Optical] or [Internal Projector Speaker].
91 PC Connection Problems The sound does not play when the PC is connected with an HDMI cable. • Contact your video card manufacturer to check the HDMI audio output. (Video cards designed for use with DVI format files need to be connected separately with an audio cable.) The screen is cut off or moved to one side after it is connected to a PC. • Set to a resolution that supports the PC input. (Reboot your PC after changing the resolution.) ENGLISH The screen remains blank after it is connected to a PC.
92 [Photo & Video] Movie Playback Problems For more information about supported files, see “PLAY OTHER DEVICE FILES”. ENGLISH I cannot find a file in the [Photo & Video]. • Check that the files on the USB storage device can be read by a PC. • Check that the file extension is supported. I get a message saying “This file is not supported” or the sound is playing normally but the video is not. • Check that the file plays without any problems on a PC’s video player. Also check for file damage.
93 ENGLISH I cannot see the subtitles. • Check that the file plays without any problems on a PC’s video player. Also check for file damage. • Check that the video and subtitle files have the same name. • Also check that both the video file and the subtitle file are in the same folder. • Check that the subtitle file format is supported. • Check that the language is supported. (You can check the language of the subtitle file by opening the file in the Notepad.
94 Network Connection Problems ENGLISH You can check the network connection status as shown below. • (Q. Settings) [Network] [Wired Connection (Ethernet)] • (Q. Settings) [Network] [Wi-Fi Connection] [Advanced Wi-Fi Settings] When X appears next to projector • Check the projector or the AP (Router). • Check the connection status of the projector, AP (Router) and Cable Modem. • Power off and power on in the following order; 1. The Cable Modem, wait for the Cable Modem to reset. 2.
95 When X appears next to DNS ENGLISH • Check the AP (Router) or consult your Internet service provider. • Unplug the power cord of the Cable Modem or the AP (Router), wait 10 seconds. Reapply power. • After the Cable Modem or AP (Router) has Initialized (Reset), try to reconnect. • Check that the MAC address of the projector/AP (Router) is registered with your Internet service provider.
96 LG Account Problems In some countries, access to the website (www.lgappstv.com) may be restricted. ENGLISH I have already signed up on the projector. Do I still have to sign up again at the website (www.lgappstv.com)? • If you have already signed up on your projector, you do not have to sign up again on the website. You can sign into the website by using the same ID and password and entering the additional information to complete the email verification process.
97 Contents Problems Internet Browser Problems Some parts of a particular website are not visible when I am using the Internet. • The [Web Browser] supports only HTML5 media and not Flash Plug-in. • The [Web Browser] does not support plug-in installation. • On the [Web Browser], it may not be possible to play media files in formats other than JPEG/PNG/GIF • You cannot save attachments or images. The Internet browser automatically shuts down when I visit a website.
