Owner's Manual

82 SERIAL COMMUNICATION FUNCTION
12. Black Level (Command: nm) 14. Auto Configure (Command: ju)
15. Input Select (Command: xb)
13. Energy Saving (Command: np)
⇒ Adjusts the value of black level.
Transmission
[n][m][][Set ID][][Data][Cr]
Data 00: Low 01: High
(* Transmitted in hexadecimal code)
Ack
[m][][Set ID][][OK][Data][x]
Data 00: Low 01: High
⇒ Optimizes the screen automatically in PC
input mode.
Transmission
[j][u][][Set ID][][Data][Cr]
Data 01: To set
(* Transmitted in hexadecimal code)
Ack
[u][] [Set ID][][OK][Data][x]
Data 01: To set
⇒ Selects the input signal.
Transmission
[x][b][][Set ID][][Data][Cr]
Data 20: AV 40: Component
60: RGB-PC 90: HDMI 1
91: HDMI 2 92: HDMI 3
(* Transmitted in hexadecimal code)
Ack
[b][] [Set ID][][OK][Data][x]
Data 20: AV 40: Component
60: RGB-PC 90: HDMI 1
91: HDMI 2 92: HDMI 3
⇒ Sets the energy saving mode.
Transmission
[n][p][][Set ID][][Data][Cr]
Data 00: Minimum
Data 01: Medium
Data 02: Maximum
(* Transmitted in hexadecimal code)
Ack
[p][] [Set ID][][OK][Data][x]
Data 00: Minimum
Data 01: Medium
Data 02: Maximum