Owner's Manual

33
SETTING UP THE LASER DISPLAY
To use SIMPLINK
SIMPLINK allows users to control and
manage multiple multimedia devices
using the convenient Laser Display
remote control and SIMPLINK menu.
1 Connect the Laser Display's HDMI
IN terminal with SIMPLINK device's
HDMI output terminal using HDMI
cable. For home theater units with
SIMPLINK function, connect HDMI
terminals as above and use an
optical cable to connect Optical
Digital Audio Out from the Laser
Display to Optical Digital Audio In of
the SIMPLINK device.
2 Press the SIMPLINK button.
SIMPLINK menu window appears.
3 Select Set SIMPLINK on SIMPLINK
menu window. SIMPLINK setup
window appears.
4 Set SIMPLINK to On in SIMPLINK
setup window.
5 Close SIMPLINK setup window.
6 Select the device to control from
SIMPLINK.
• This function works only on
devices with the SIMPLINK logo
( ).
• Make sure that the external device
has a SIMPLINK logo.
• To use SIMPLINK function, use
a high-speed HDMIⓇ cable (with
CEC, or Consumer Electronics
Control feature added) and No.
13 pin connected for information
exchange between devices.
• Turn on or select the media of a
device with home theater features
to see the speaker switch to HT
Speaker.
• Connect with an Optical cable
(sold separately) to use HT
Speaker.
• Switching to external input causes
devices operating with SIMPLINK
to stop.
• Use of a third-party device with
HDMI-CEC features may cause
malfunctions.
NOTE