Owner's Manual

Use To Screen
Do not scrub the screen with a knife or
auger
with a
sharp
end.
Pressing
the screen too
strongly may damage
LCD screen.
It is better write
by using
a touch
pen
for more
clarity.
-
The touch
pen
is attached to the
right
side of the screen.
-
Push the frame of the screen with hands in order to close the screen at its own
place
after
using
it if
pulling
the screen
out.
Catching
and
pushing
the bottom handle of the screen
may
result
in
danger.
Pressing any place
of the screen returns to the main screen with the screen off
when it becomes the
power saving
status.
For more
details,
Refer to screen
guide.
Operate
the screen
again
when
any problem
occurs
in
using
it.
-
Open
the door of
refrigerator
and touch the reset button on it once.
-
Contents stored do not
disappear
even
if
operating
the screen
program again.
For more
details,
see the screen
guide.
Caution!
-
Avoid a
place
around a furnace or disclosed to much moisture as the remote control is
composed
of a
precise
electronic structure.
-
Take care since a
strong
shock
may
result in failure.
-
It will not
properly operate
in
general
TV.
-
Do not use cells other than dedicated ones.
-
Do not use both new cells and old cells
together.
Otherwise,
it
may
cause fire or electrical shock due to
rupture
of
cells,
leakage liquid.
-
In case of
inserting
cells into a
device,
insert them as indicated
considering polar
indication
(+/- direction).
Otherwise,
it
may
cause
fire,
damage
or stains of
neighboring
due to
rupture
of
cells,
leakage liquid.
-
In case of
pull
out cells used for the
device,
exercise caution so that the child should not swallow them.
-
Place cells at a
place
where child' s hands shall not touch with them. If the child swallow
them,
please
consult the doctor
immediately.
Caution!
Use To Remote Control
Press a
place
to receive
signal
from the remote control
in
the front of the
monitor when
using
the monitor.
-
You can
easily
select channel and
control volume
by using
the remote
control.
-
Make sure no obstacles exist
between remote control and the
front
receipt part.
-
Get rid of the lid
pressing
it toward No.1 and then
lifting
it
up
toward
No.2.
-
Replace
the cell to the
(+), (-)
direction inside of the remote control and
then close the lid.
-
By using
a 1.5V
(AAA type) type
of
2
cells,
replace
old cells with new
ones.
-
The life
cycle
of a cell is about a
year
and
may
become short
depending
on
frequency
of its use.
-
Take the cells out when not
using
the remote control for a
long
time as
liquid
of them flows out to cause failure.
Function of
Remote Control
Press a
place
to receive
signal
from the remote control
in
the front of the
monitor when
using
the monitor.
Method to
Change
Cell
Operation
15
Touch when
taking
a
picture
Touch when
desiring
to watch TV
Touch when
selecting
the
channel saved .
Touch when
moving
to the main screen.
Touch when
desiring
to
have mute function.
Touching
it
gain
makes a
noise.
Touch when
desiring
to
return the channel
watched
immediately
before.
Touch when
tuning
volume .