Owner's Manual

13
Method to Connect Cables
There is a terminal on the rear
upper part
of
refrigerator
where the external
devices can be
plugged-in.
?
For
connection,
turn the connection terminal clockwise and
tighten.
?
In
connecting
coaxial cables take care so that
copper
wires
will
not be bent.
?
USB
1/2
,
COM
1/2
are external
expansion
terminals used
in
servicing.
?
Connect the
TV
terminal on the
top
of the
refrigerator
to antenna terminal with
coaxial cable.
--
Install the antenna
in
a
place separated
from
power
transmission lines. Contact
antenna
may
cause electrical shock.
--
Install with
adequate space
so that even
if
antenna falls down due to severe
wind,
it
will
not contact
adjacent power
lines.
--
If
the antenna cable attaches to the
refrigerator
from
outdoors,
be sure that the cable
bends
upward coming
into the
refrigerator. Entry
of water into the
refrigerator's
electronic
inputs may
cause electrical shock.
Select
TV
channel 3 or
4
when
connecting
an
auxiliary
video source.
The channel selected must
correspond
to the channel switch on the rear side of
the video source.
?
Connect the
refrigerator
and the video source
using
the
RF
coaxial cable and its
corresponding jacks
Connection
Terminal
Connect to
TV-antenna
Caution!
Connect to Video
?
When
high
volume sound is
required,
connect
the audio source to an external
speaker.
Connect to
Outside
Speaker
(audio)
Installation
Rear
Upper
Side of
Refrigerator
antenna terminal
TV Coaxial cable
TV terminal on the
top
of
refrigerator.
antenna terminal
TV Coaxial cable TV Coaxial cable
TV terminal on the
top
of
refrigerator.