ENHANCE D BZ03 GCC-4320B EnglishDeutcFraIop
CAUTION The laser used in the CD-RW/DVD-ROM drive : Do not attempt to open the To reduce the risk of electric No user-serviceable Refer can damage your eyes. cover. shock, do parts inside. service servicing to qualified Use of controls or performance of not remove cover (or back). personnel. procedures other than those specified herein may result in hazardous radiation exposure.
This product is manufactured to comply with the radio interference requirements 89/336/EEC, 93/68/EEC and 73/23/EEC. of EEC DIRECTIVE CAUTION INVISIBLE LASER RADIATION WHEN OPEN AVOID EXPOSURE TO BEAM. - VARNING-OSYNLIG LASERSTRALNING NAR DENNA DEL AR OPPNAD STRALEN AR CLASS 1 LASER PRODUCT KLASSE 1 LASER PRODUKT LUOKAN 1 LASER LAITE KLASS 1 LASER APPARAT FARLIG. CLASS 1 LASER PRODUKT OPPNAS KAN MAN UTSATTAS FOR BADE SYNLIG OCH STRALNING.
Contents Introduction Features........................................2 ImportantPrecautions.............................3 SystemEnvironment..............................4 LocationandFunctionofControls...................5 Installation InstallingtheDrive...............................6 DeviceDrivers..................................11 Operation HowtoUsetheDiscs............................12 Appendix Troubleshooting.................................13 Specifications..................................
Thank you for this purchasing CD-R/DVDROM Drive. Features ? Enhanced-IDE ? Power tray loading disc (The can and also be interface. ejection of disc. ejected manually.) ? Combination CD-R/RW and DVD-ROM Drive functions into ? Supports ? Supports Region playback ? Supports ? ? * UDF for easy writing 32X max 16X Reading (DVD-ROM), Items to CD-RW discs. error prevention technology-SuperLink ReWriting (CD-RW), and 40X on max capabilities Reading (CD-ROM)*. of discs.
Important Precautions Follow these Precautions ? when handling the drive or discs. Please take notice that the manufacturer of this offer any or ? precautions warranty against data loss due handling, or direct or indirect equipment does not inappropriate installation to damages. Please take notice that the manufacturer will bear for direct or indirect damages caused by the no responsibility product or its of this use malfunction.
System Environment Computer This unit can be operated System requirements in the system environment explained here. 233MHz CPU or Memory (or faster) Pentium (for recommended) faster Windows 95/98 : 32MB or 10x speed, greater. Windows NT Workstation Ver. 4.0: 32MB (64MB recommended) Windows 2000:64MB or greater(128MB recommended) 75MB Hard disk greater or more free space. for or over writing depends on the Enhanced-IDE interface Interface Secondary 5.
DirectCDTM v2.5b(s) Introduction Location and Function of Controls Front Panel 6 5 WR TE ED WR READ 12 1. 3 4 6. Drive Headphone Jack activity indicators Two colored LEDs 2. Volume Control indicate the 3. Emergency Eject Hole 4. Stop/Eject Button 5. Disc Tray are operation used to of CD-RW/ DVD-ROM Drive. (1) Read The orange color is displayed when the spindle motor begins the Spin up operation: accessing data, reading data, playing Audio, and up loading tray.
DirectCDTM v2.5b(s) Installation Installing Before Before the Drive the installing drive, please You will need the Installation ? A screw note the following points. following: driver of a suitable size to fit the securing computer, find the screws for the drive unit. ? The manual for the positions so you can mounting for the IDE controller cable. Turn off all peripheral appliances of the computer and the computer itself, and disconnect their power cords from the wall sockets.
DirectCDTM v2.5b(s) Installation Before Jumper Setup installation, The drive set the jumper be connected can interface. When several (up must be set in way. a unique connector the Master on the or Slave panel. rear EIDE (ATAPI) four) EIDE devices are connected, each Specific knowledge of hardware and as on an to software is necessary to install the drive.
DirectCDTM v2.5b(s) Installation The CD-RW/DVD-ROM drive connects to the motherboard of the host PC Connection computer using ROM Drive To Install as a an as a To install the drive Master Drive the IDE interface cable. You may connect the CD-RW/DVD- Slave Master or as a device, depending Master, the jumper can on your be left computer. from supplied as factory.
DirectCDTM v2.5b(s) To Install Installation To install the drive as a panel Slave Drive as a Slave, change the jumper setting on the rear to SL.
DirectCDTM v2.5b(s) Installation Connect the Connecting the Interface connected to Connector IDE cable to the back of the CD-RW/DVD-ROM 40-pin Drive, making the coloured sure pin 1 on (red) stripe on the IDE cable is the CD-RW/DVD-ROM drive. Pin 1 is closest to the Power Connector. NOTE : Generally, the IDE connector is keyed and will only fit one way.
Device Drivers When using Windows 95/98/2000/Me/XP or Window NT Workstation no special device driver is required. Your system, upon Power On and bootup after installing and connecting the new CD-RW/DVD-ROM drive, will recognize and load native software drivers automatically. Ver.4.0, The DOS and Windows 3.1 anytime users can download the DOS Device drivers via internet. For your information, please consult the following http://www.lge.com http://www.lgeservice.com/drivers.
DirectCDTM v2.5b(s) Operation How to Use the Discs When CD-ROM using discs, CD-R discs, DVD discs or CD-RW discs, don't attach any stickers or labels to the discs. Using discs with them attached not only causes read and write errors, but data on the disc may be lost due to damage to the disc itself. The Discs in this unit DO NOT may be DO NOT use store data Emergency a feature that allows the CD to be an emergency, such use this feature Turn the power to OFF.
Troubleshooting Before Before ? Requesting Service ? calling for service, check this list. The drive doesn't have power. ? Is the power ? Is the Power Connector to the drive The ? ? ? supply system doesn't cable from the host computer plugged in? securely attached? start.
Specifications Items General CD/DVD/CD-RW Supported Discs *Read Function CD-ROM, CD-ROM XA, Audio CD, Mixed Mode (Audio and Data Combined), CD-I FMV,Video CD, Photo CD (Single -Session), CD-Plus/CD-Extra, CD-Text DVD-Si ngle/Dual, DVD-R/RW, DVD+RW CD-ROM, CD-ROM XA, Audio CD, Mixed Mode (Audio and Data Combined),CD-I FMV, Video CD, CD-Plus/CD-Extra and Multi *Write Function Disc Diameter 12cm/ 8cm, standard size CD's Host Interface E-IDE/ATAPI Read/Write Write Speed (CD-R) : 8X, 16X, 24X, (C
ⓒ 2002 Copyright Caution! The disc rotates at high speed in the drive unit. Use of worn, damaged, or non-standard CD-ROM discs can only adversely affect the drive and cause the disc to LG Electronics U.S.A. Inc. 1000 Sylvan Ave. Englewood Cliffs NJ 07632 U.S.A. or shatter http://www.lgeus.com or LG Electronics Canada Inc. Superior Blvd, Mississauga Ontario, Canada 12, use a damaged extremely rare steps which can be taken to inserting them into 1. Take Willich, Germany LG Electronics U.
