Owner's Manual

After dispenser
is used
The water collector has no self-draining
function. It should be cleaned regularly.
Remove the cover by pulling the front side of
water collector cover and dry it with a cloth.
Pull the cover fully to the front ① and pull up
the rear end of the cover ② slightly to pull it out.
③ Clean the floor and cover with a dry cloth.
20
Care and maintenance
How to dismantle parts
•
Dismantling is done in the reverse sequence of assembly.
Be sure to unplug the power plug before dismantling and assembly.
Never apply severe force to dismantle parts. Parts may be damaged.
NOTE
To remove a shelf, push the shelf to the left ,
lift the left part of the shelf a bit , lift the right
part up , and take it out.
Freezer
compartment
lamp
Freezer
compartment
shelf
Door rack and
support
Space plus
Ice storage bin
After dispenser
is used