Owner's Manual

95
Additional Functions
2
Multiparty
or Conference Calls
The
multiparty
or conference service
provides you
with the
ability
to
have a simultaneous conversation with more than one
caller,
if
your
network service
provider supports
this feature.
A
multiparty
call can
only
be set
up
when
you
have one active call
and one call on
hold,
both calls
having
been answered. Once a
multiparty
call is set
up,
calls
may
be
added,
disconnected or
separated (that
is,
removed from the
multiparty
call but still
connected to
you) by
the
person
who set
up
the
multiparty
call.
These
options
are all available from the in-call menu and are listed in
Section.
The maximum callers in a
multiparty
call is five. Once
started,
you
are in control of the
multiparty
call,
and
only you
can add calls to the
multiparty
call.
2-1
Making
a Second Call
You can make a second call while
you
are
already
in a call. To do
this,
enter the second number and
press [Send].
When
you get
second call the first call is
automatically put
on hold. You can
swap
between calls
by selecting
the
[Options] key
then
Swap.
2-2
Setting up
a
Multiparty
Call
You can connect a call on hold to the
currently
active call to form a
multiparty
call
by selecting
the
[Options] key
then
Multiparty/Join
all.