W1_FA163_ENG_MFL63267150 MODEL : FA163 (FA163-D0P, FAS163F) ENGLISH iPod is a trademark of Apple Computer, Inc, registered in the U.S. and other countries.
Safety Precaution CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
There is so much your Hi-Fi system can do ENGLISH VOLUME Adjustment Move your finger around the touch wheel.
About Player CD slot loader To change the functions Change the functions among FM, AM, CD, USB, IPOD, PORTABLE. Turn on or off eXtreme Dynamic Sound System Reinforce the treble, bass and surround sound effect. XDSS ON will show in the display. Press again for NORMAL. OPTIMIZER Optimizes compressible MP3 files so that it improves the bass sound. iPod Docking connector Z You can use it when inserting or removing CDs. USB Rec. Record FM, AM, CD or PORTABLE source to USB.
About Remote control Fall asleep while listening to your player Firstly, start a radio station or music. Press SLEEP one or more times to select delay time between 10 and 180 minutes, after the player will turn off. Dim the display light Turn on or off To change the functions Change the functions among FM, AM, CD. To change the INPUT functions Change the functions among USB, PORTABLE, IPOD.
Setting up 1 Connect the speaker cables to the player Cables from the left-hand speaker connect to the terminal marked L (left) + (plus) and - (minus). Cables from the right-hand speaker are connected to the terminal marked R (right) + (plus) and - (minus). To connect the cable to the player, press each of the four square plastic finger pads on the rear of the player. The connector will open ready to receive a cable. 2 Fit the AM loop aerial to its stand Connect the AM loop aerial to the player.
iPod Docking Listening to CDs Audio CD and MP3/WMA CD can be played back in this player. ON PLAYER 1. Insert the CD: ON REMOTE ON PLAYER ON REMOTE 1. Select the iPod function: “IPOD” displays. FUNC. INPUT 2. Start the playing: B/[] FUNC. B/[] FUNCTION or INPUT Z FUNC. FUNCTION 3. Start the CD playing: B/[] B/[] 4. To stop a CD playing: x x ENTER 2. Select the CD function: The display will show the total number of tracks (files). You can listen to music by connecting iPod to the player.
Listening to the radio Make sure both the FM and AM aerials are connected. 1. Select either FM or AM: 2. Select the radio station: 3. To ‘save’ a radio station: A preset number will show in the display. 4. To select a ‘saved’ station: 5. To confirm press: Up to 50 radio stations can be saved. ON PLAYER ON REMOTE FUNC. FUNCTION ./> .
USB direct Recording Listening to music from your portable player Record FM, AM or PORTABLE source to USB Connect USB to the player before recording. 1. Select a mode (PORTABLE, FM or AM) in which you want to record: ON PLAYER ON REMOTE FUNC. FUNCTION or INPUT 2. Start the Recording: USB Rec. REC 3. To stop a Recording: x x The player can be used to play the music from many types of portable player. ON PLAYER Record CD source to USB 2.
Use your player as an alarm clock VSM (Virtual Sound Matrix) (Turn the power on.) Press and hold TIMER on the player for two seconds. Each function, TUNER, CD, USB flashes for two seconds. Press SET on the player when the function you want to be woken by is showing. If you choose TUNER you will be shown the stations you have saved as presets. Use ./> on the player to select the station you want, then press SET on the player. You will be shown the ON TIME display.
Troubleshooting Symptom Specifications Cause Correction General No power. No sound. The power cord is not plugged in. Plug in the power cord. Check whether electricity failed. Check the condition by operating other electronic devices. Check whether you select right function. Press FUNC. (FUNCTION/INPUT) and check the selected function.
P/NO : MFL63267150
