Datasheet

Installation5RMI0-02A

Inverter Single

Connecting the Piping

Preparing the indoor units piping and drain hose for

installation through the wall.

1 Route the indoor tubing and the drain hose in the

direction of rear left or right.

Good case

• Press on the tubing cover and unfold the tubing to

downward slowly. And then bend to the left side slowly.

Bad case

• Following bending case from right to left directly may

cause damage to the tubing.

* The feature can be changed according to a type of

model.

Drain hose junction

1 Remove the rubber stopple in the desired drain

direction.

2 Insert drain hose into the handle of drain pan, and join

drain hose and connecting hose according to the

figure by.

Connecting

part

Adhesive

Drain

hose

rubber cap

Only the

desired direction

Backwards

Left

Right

Downwards

Installation Information. For right piping. Follow the

instruction above.

WARNING

• When installing drain hose, make sure the drain hose

goes through the nearest pipe hole.

NOTICE