Datasheet

Installation 5RMI0-02A

Inverter Single

Open the front panel

1 Pull out the lower section of front panel and lift it up.

Remove the service cover

1 To detach the SVC cover, pull the two screw covers

and remove the two screws at the lower part.

2 Pull down the SVC cover.

Remove the Terminal block cover

1 Remove the one taptite screw and one ground screw

at the right side part.

2 Detach the terminal block cover.

Detach the clamp

1. Detach the clamp for piping.

Front

panel

Preparing Work for Installation

Type C

Ground Screw

Clamp