Datasheet

Installation 5RMI0-02A
138
Inverter Single
TorqueOutside Diameter
2. Align the center of the pipings and sufficiently tighten
the flare nut by hand.
3. Finally, tighten the flare nut with torque wrench until the
wrench clicks.
- When tightening the flare nut with torque wrench,
ensure the direction for tightening follows the arrow
on the wrench.
Outdoor unit
Gas side piping
(Bigger diameter)
Liquid side piping
(Smaller diameter)
Torque wrench
Outdoor unit
1. Remove the tubing cover from the unit by loosening the
screw.
Tubing cover
mm inch kgf·cm N·m
Ø6.35 1/4 180~250 17.6~24.5
Ø9.52 3/8 340~420 33.3~41.2
Ø12.7 1/2 550~660 53.9~64.7
Ø15.88 5/8 630~820 61.7~80.4