Datasheet

Installation 5RMI0-02A

136

Inverter Single

Installation of Indoor Unit

1. Hook the indoor unit onto the upper portion of the

installation plate.( engage the three hooks at the top of

the indoor unit with the upper edge of the installation

plate) Ensure that the hooks are properly seated on

the installation plate by moving it left and right

2. Unlock the tubing holder from the chassis and mount

between the chassis and installation plate in order to

separate the bottom side of the indoor unit from the

wall.

* The feature can be changed according to type of model.

Piping

1. Insert the connecting cable through the bottom side of indoor unit and connect the cable (You can see detail

contents in Connecting the cables section)

2. Secure the cable onto the control board with the cable retainer.

3. Tape the tubing pipe, drain hose and the connection cable. Be sure that the drain hose is located at the lowest side

of the bundle. Locating at the upper side can cause overflow from the drain pan through the inside of the unit.

* The feature can be changed according to type of model.

Tubing Holder

Installation plate

Connecting pipe

Connecting

cable

Tape

Drain hose

Connecting pipe

Connecting

cable

Tape

Drain hose