Datasheet

Installation5RMI0-02A
135
Inverter Single
Indoor unit
1. Open the panel of the indoor unit.
2. Remove the chassis cover from the unit by loosing 3
screws.
3. Pull back the tubing holder.
4. Remove the pipe port cover and position the piping.
Chassis cover
Right
Tubing holder
Downwards
Left
Backwards
Indoor unit back side view
Connecting the Piping
Good case
• Press on the tubing cover and unfold the tubing to downward slowly. And then bend to the left side slowly.
Bad case
• Following bending case from right to left directly may cause damage to the tubing.
Installation Information. For right piping. Follow the instruction above.
CAUTION