Datasheet

Installation5RMI0-02A
121
Inverter Single
2. Align the center of the pipings and sufficiently tighten
the flare nut by hand.
3. Finally, tighten the flare nut with torque wrench until the
wrench clicks.
- When tightening the flare nut with torque wrench,
ensure the direction for tightening follows the arrow
on the wrench.
Liquid side piping
(Smaller diameter)
Torque wrench
Gas side piping
(Bigger diameter)
Outdoor unit
Outdoor unit
1. Remove the tubing cover from the unit by loosening the
screw.
Cover control
Outdoor UnitOutdoor UnitOutdoor Unit
Connecting
cable
1(L) 2(N) 1(L) 2(N) 3
mm inch kgf·cm N·m
Ø6.35 1/4 180~250 17.6~24.5
Ø9.52 3/8 340~420 33.3~41.2
Ø12.7 1/2 550~660 53.9~64.7
Ø15.88 5/8 630~820 61.7~80.4
Outside Diameter Torque