Datasheet

Installation5RMI0-02A
117
Inverter Single
Indoor unit
1. Open the panel of the indoor unit.
2. Remove the chassis cover from the unit by loosing 3
screws.
3. Pull back the tubing holder.
4. Remove the pipe port cover and position the piping.
Chassis cover
Right
Indoor unit back side view
Tubing holder
Left
Backwards
Connecting the Piping
Indoor unit
1. Insert 5 hooks of the chassis cover into the square hole
of the chassis certainly.
2. Assemble the chassis cover from the unit by joining 3
screws.
Chassis cover
Assembly of chassis cover