Datasheet

Installation 5RMI0-02A
114
Inverter Single
Select the best Location
Outdoor unit
- If an awning is built over the unit to prevent
direct sunlight or rain exposure, make sure that heat
radiation from the condenser is not restricted.
- Ensure that the space around the back and sides is
more than 300mm. The space in front of the unit should
be more than 700mm of space.
- Do not place animals and plants in the path of the warm
air.
- Take the weight of the air conditioner into
account and select a place where noise and vibration
are minimum.
- Select a place where the warm air and noise from the
air conditioner do not disturb
neighbors.
Indoor unit
- There should not be any heat or steam near the unit.
- Select a place where there are no obstacles around of the unit.
- Make sure that condensation drainage can be conveniently routed away.
- Do not install near a doorway.
- Ensure that the interval between a wall and the left
(or right) of the unit is more than 100mm.
The unit should be installed as high as possible on
the wall, allowing a minimum of 200mm from ceiling.
- Use a metal detector to locate studs to prevent
unnecessary damage to the wall.
* The feature can be changed according to type of model.
More than 200
More than
More than 2300
More than
100
100
(Unit : mm)
More than
300
More than
300
Sunroof
Fence or
obstacles
More than
700
More than
600
(Unit : mm)
• Install the indoor unit on the wall where the height from the
floor is more than 2300mm.
NOTICE