DVD PLAYER/ VIDEO CASSETTE RECORDER OWNER’S MANUAL MODEL : DV1000 PAL Before connecting, operating or adjusting this product, please read this instruction booklet carefully and completely. FOR THE GUARANTEE TERMS & CONDITIONS, PLEASE REFER TO BACK COVER OF THIS MANUAL.
Safety Precautions WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
DC593NIQ NA4ULL-74V Contents Introduction Preparation Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-10 Connecting to a TV . . . . . . . . . . . . . . . . . . . . . . . 9 Connecting to Optional Equipment . . . . . . . . . . . 10 Important notes on controlling this unit . . . . . . . . 10 Before Operation - VCR part . . . . . . . . . . . . . . 11-15 Tuning in a video channel on your TV. . . . . . . . . 11 Using your unit for the very first time . . . . . . . . .
Before Use Disc-related terms Playable Discs Title (DVD only) The main film content or accompanying feature content or additional feature content, or music album. Each title is assigned a title reference number enabling you to locate it easily. DVD (8 cm / 12 cm disc) Video CD (VCD) (8 cm / 12 cm disc) Audio CD (8 cm / 12 cm disc) In addition, this unit can play a CD-R or CD-RW that contains audio titles or MP3 files.
Before Use (Cont’d) Precautions Handling the unit When setting the unit The picture and sound of a nearby TV or radio may be distorted during playback. In this case, position the unit away from the TV or radio, or turn off the unit after removing the disc. After playing, store the disc in its case. Do not expose the disc to direct sunlight or sources of heat, or leave it in a parked car exposed to direct sunlight, as there may be a considerable temperature increase inside the car.
Front Panel and Display Window Tape Eject ) PAUSE ( / Pause playback temporarily / press repeatedly for frame-by-frame playback. STOP ( Á ) Stops playback. Forward Skip/Scan, Fast-Forward ( ) Go to NEXT chapter/track. Press and hold for two seconds for a fast forward search. Winds the tape forwards. PLAY ( G ) DVD OPEN/CLOSE ( ) Starts playback. Opens or closes the disc tray. Reverse Skip/Scan, Rewind ( ) Disc Tray Go to beginning of current chapter/track Insert a disc here. or to PREVIOUS chapter/track.
Remote Control OPEN/CLOSE EJECT POWER TV/VCR DVD VHS DISPLAY CLK/CNT OUTPUT SELECT DISC MENU SELECT OK SETUP / i ENTER AV TITLE PAUSE/STEP STOP REC/ITR BACKWARD PLAY FORWARD PROGRAM CLEAR AUDIO SUBTITLE MARKER - SEARCH C.LOCK ANGLE RETURN ZOOM REPEAT RANDOM A-B ez REPEAT CM SKIP LP AAA Point the remote control at the remote sensor and press the buttons.
Rear Panel AUDIO OUT (Left/Right) Connect to an amplifier, receiver or stereo system. COAXIAL (Digital audio out jack) Connect to digital (coaxial) audio equipment. AERIAL Connect the aerial using this jack. EURO AV2 Connect to another video recorder. VHS IN+OUT/DVD OUT DVD EXCLUSIVE OUT AUDIO OUT AUDIO OUT COAXIAL R DIGITAL AERIAL EURO AV2 DECODER RF.OUT EURO AV1 AUDIO/ VIDEO DVD/VHS OUT L VIDEO OUT AC Power Cord Connect to a power source.
Connections Caution – Make sure this unit is connected directly to the TV. Set the TV to the correct video input channel. – Do not connect this unit’s AUDIO OUT jack to the phono in jack (record deck) of your audio system. DVD exclusive out connection 1 You can only watch the DVD playback. Connect the VIDEO OUT jack on this unit’s DVD EXCLUSIVE OUT to the video in jack on the TV using the video cable.
Connections (Cont’d) / Important notes on controlling this unit Connecting to Optional Equipment Connecting to an amplifier equipped with two channel analog stereo or Dolby Surround Connect the Left and Right AUDIO OUT jacks on this unit to the audio left and right in jacks on your amplifier, receiver or stereo system, using the audio cables.
Before Operation - VCR part Tuning in a video channel on your TV PROG. 3 or 4 on the front of your VCR for 6 Press more than 4 seconds. RF22 will appear in the display window. Notes 1 The following picture will be displayed on the TV screen. The output frequency of this video recorder (VCR) is set at UHF channel 22. If channel 22 is already used by another TV station, or if the picture is distorted, you can change the transmitter channel of your VCR.
Before Operation - VCR part Using your unit for the very first time Notes For the following steps we assume that you have just connected your video recorder for the very first time. To make tuning TV stations an easy task your VCR incorporates the Automatic Channel Memory System (ACMS). This system will automatically tune and store TV channels to your VCR. While this is happening the clock (date & time) in the video recorder will be set automatically.
Before Operation - VCR part To set the colour system The clock in your VCR controls time and date settings for your VCR. Your VCR’s clock is checked continually against Teletext information broadcast by most TV stations. The clock is set automatically during ACMS (Automatic Channel Memory System) when your VCR detects a channel that broadcasts a Teletext signal. If the broadcast signal is weak the clock will not be set and will require setting manually.
Before Operation - VCR part How to use the main menu Tuning in TV Stations Automatically This VCR can easily be programmed by using the menus displayed on screen. The menus are controlled from the Remote Control Handset. The guidance given on page 12 is for first time use of your VCR. Should you wish to perform the Automatic Channel Memory System (ACMS) again please follow the guidance given on this page. You may tune up to 88 TV stations into your VCR.
Before Operation - VCR part Tuning in TV Stations Manually 1 Press 2 to select MFT. Control the fine tuning of the station by pressing 3 or 4. Press i. The main menu will appear on the TV screen. Press 1 or 2 to select the PR SET. Press OK. PR 06 CH C40 STATION MFT 00 P RSET i Press 2 to select STATION so that you may name 5 your TV station. Press OK. The TV station name list will appear. 1 2 Pr-12 REC P RSET ACMS f OSD ON OFF 16:9 4:3 OPR TIME DATE VCR SYSTEM Dr.
Before Operation - VCR part Changing the order of TV Stations Deleting & Selecting TV Stations After tuning TV stations into your VCR you may wish to change the order in which they are stored without having to retune them against! The instructions given on this page will show you how you can simply move them into your desired order. After tuning TV stations into your VCR you may wish to delete a station. The instructions given on this page will show you how easily delete any unwanted TV stations.
Before Operation - DVD part Temporary Feedback Field Icons General Explanation TITLE Repeat Chapter TRACK Repeat Track (non-PBC Video CDs only) ALL A On-Screen Display B OFF Repeat A-B Repeat Off Action prohibited or not available On-screen display operation 1 Press 3 or 4 to select an item. 2 The selected item will be highlighted. Press 1 or 2 to change the setting of an item. 3 The number buttons can be also be used for setting numbers (e.g., title number).
Before Operation (Continued) - DVD part Initial Settings Menu Language You can set your own Personal Preferences on this unit. Select a language for the setup menu. This is the menu you see when you press SETUP. Initial Settings General Operation Press SETUP. The setup menu appears.
Before Operation (Continued) - DVD part Others Digital Audio Output The DRC, Vocal and PBC settings can be changed. 4 to select the desired item and press Press 3/4 SELECT/ENTER. The setting of the selected item is changed between On and Off. Each DVD disc has a variety of audio output options. Set the player’s Digital Audio Output according to the type of audio system you use.
Before Operation (Continued) - DVD part Parental Control Country Code Rating Enter the code of a country/area whose standards were used to rate the DVD video disc, referring to the list (See “Country Code List”, page 35.). DVD Movies on DVDs may contain scenes not suitable for children. Therefore, discs may contain Parental Control information that applies to the complete disc or to certain scenes on the disc.
Operation with tape Playing a tape 1 Make sure that you have correctly connected your VCR as described earlier in this book. Turn on your TV and select the video channel for video playback. Press POWER to turn on your VCR. Insert the video cassette into your VCR. The video cassette should have the window side facing up and the arrow facing away from you. PLAY to start playing your tape.
Operation with tape Instant Timer Recording (ITR) Your VCR allows you to make recordings using a variety of simple methods: Instant Timer Recording (ITR) start recording immediately for a set period of time or until the video cassette runs out. Timer Recording you may record at a later time (up to 1 month from the present). Up to 7 of these automatic recordings may be set. Your VCR incorporates Long Play (LP) which enables you to record up to twice the amount of time on a video cassette.
Operation with tape Timer recording using On Screen Display 6 Note PR BBC1 ------- Before setting the timer make sure that you have set the VCR clock correctly and you know which stations you have tuned TV stations on your VCR. 1 2 3 Insert a video cassette with protection tab into your VCR. The video cassette should have the window side facing up and the arrow facing away from you. Press i. Press 1 or 2 to select REC. Press OK. Press OK to start setting the timer record event.
Operation with DVD and Video CD Playing a DVD and Video CD Playback Setup DVD VCD2.0 VCD1.1 Turn on the TV and select the video input source connected to the DVD player. Audio system: Turn on the audio system and select the input source connected to the DVD player. Press OPEN/CLOSE to open the disc tray. 1 your chosen disc in the tray, with the label 2 Load facing up. When a double-sided DVD is inserted, make sure the side you want to play is facing up. OPEN/CLOSE to close the tray.
Operation with DVD and Video CD General Features (continued) Still Picture and Frame-by-frame playback DVD VCD2.0 VCD1.1 Search DVD VCD2.0 VCD1.1 1 Press and hold . or > for about two seconds during playback. The player will now go into SEARCH mode. 2 Press and hold . or > repeatedly to select the required speed: mX2, mX4, mX16, mX100 (backward) or MX2, MX4, MX16, MX100 (forward). With a Video CD, the Search speed changes: mX2, mX4, mX8 (backward) or MX2, MX4, MX8 (forward).
Operation with DVD and Video CD General Features (continued) Special DVD Features Zoom Checking the contents of DVD Video discs: Menus DVD VCD2.0 VCD1.1 The Zoom function allows you to enlarge the video image and to move through the enlarged image. 1 Press ZOOM during playback or still playback to activate the Zoom function. If you press ZOOM repeatedly, the magnification level increases up to six times. 2 Use the 1 2 3 4 buttons to move through the zoomed picture.
Operation with Audio CD and MP3 Discs Playing an Audio CD and MP3 discs Search The DVD Player can play MP3 formatted recordings on CD-ROM, CD-R, or CD-RW discs. Before playing MP3 recordings, read the notes on MP3 Recordings on page 31. 1 Press and hold BACKWARD . or FORWARD > for about two seconds during playback. CD Program MP3 Program TRACK 1 TRACK 1.MP3 TRACK 2 TRACK 2.MP3 TRACK 3 TRACK 3.MP3 TRACK 4 TRACK 4.MP3 TRACK 5 TRACK 5.MP3 Clear All TRACK 8 STER. Clear All TRACK 8.
Programmed Playback CD VCD2.0 MP3 Programmed Playback with Audio CD and MP3 Discs VCD1.1 Programmed Playback with Video CD Note On a Video CD with PBC, you must set PBC to Off on the setup menu to use the Program function. See page 19. Program allows you to store your favorite tracks for a particular disc in the player memory. Program can contain 32 tracks (Audio CD) or 60 tracks (MP3 disc). 1 Insert the disc and close the tray.
Additional Operation - VCR part Video Doctor (Self-Diagnosis) You may easily display the current time or tape counter, amount of tape left, day, month, year, day of week, programme channel, tape speed and operational mode of your VCR will appear on the TV screen. If a recording is taking place these On Screen Displays will not be recorded onto the tape. This feature informs you that there is a problem with your VCR. These error messages will appear on the TV screen. 1 1 Press i.
Additional Operation - VCR part Hi-Fi Stereo Sound System D Your VCR will record and playback Hi-Fi stereo sound. In addition it has a stereo NICAM digital stereo sound decoder. This allows you to record and playback the sound in several different ways. Video cassettes recorded on your VCR will have a normal mono audio track and two VHS Hi-Fi stereo audio tracks.
Additional Operation - DVD part Last Condition Memory DVD CD Notes on MP3 Discs VCD1.1 About MP3 Notes – Settings are stored in memory for use any time. – This player does not memorize settings of a disc if you switch off the player before commencing to play it. Screen Saver The screen saver picture appears when you leave the DVD Player in stop mode for about five minutes. Video Mode Setting DVD VCD2.0 VCD1.
Special Recording Copying from DVD To VCR This unit allows you to copy the contents of a DVD to a VHS tape with a press of the COPY button. Note If the DVD you are attempting to copy is copy protected, you may not be able to copy the disc. 1 Insert Disc Insert the disc you wish to copy in the DVD deck and close the disc tray. Recording from another video recorder With this video recorder you can make recordings from an external source, such as copying from another video recorder or a camcorder.
Troubleshooting Check the following guide for the possible cause of a problem before contacting service. Cause Symptom Correction DVD or VHS button is not switched properly. Refer to page 10. No power. The power cord is disconnected. Plug the power cord into the wall outlet securely. The power is on, but the DVD player does not work. No disc is inserted. Insert a disc. (Check that the DVD or, audio CD indicator in the display window is lit.) No picture.
Language Code List Enter the appropriate code number for the initial settings “Disc Audio”, “Disc Subtitle” and/or “Disc Menu” (See page 18).
Country Code List Enter the appropriate code number for the initial setting “Country Code” (See page 20).
Specification General Power requirements AC 200-240V, 50 Hz Power consumption 23W Dimensions (approx.) 430 X 97.5 X 360 mm (w/h/d) Mass (approx.) 5.4 kg Operating temperature 5˚C to 35˚C (41˚F to 95˚F) Operating humidity 5 % to 90 % Timer 24 hours display tape RF Modulator UHF 22 - 68 (Adjustable) System Laser Semiconductor laser, wavelength 650 nm Video Head system Double azimuth 4 heads, helical scanning.
Technology with the human touch GUARANTEE ● LG Electronics U.K. Ltd. will provide the following services in order to expedite this Guarantee. 1. All faulty components which fail due to defective manufacture will be replaced free of charge for a period of 12 months from the original date of purchase. 2. The dealer (or his service agent) who sold the product will be reimbursed for any labour provided in the repair of this LG equipment, for a period of 12 months from the original date of purchase.
