DR389-W_BARELLK 3/21/08 6:46 PM Page 1 ENGLISH DR-2000 P/N0: MFL57156203
RC388-W_DEILAMI_ENG 2/5/08 10:03 AM Page 2 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
DR389-W_BARELLK 3/21/08 6:46 PM Page 3 Copyrights Recording equipment should be used only for lawful copying and you are advised to check carefully what is lawful copying in the area in which you are making a copy. Copying of copyright material such as films or music is unlawful unless permitted by a legal exception or consented to by the rights owner. This product incorporates copyright protection technology that is protected by method claims of certain U.S.
DR389-W_BARELLK 3/21/08 6:46 PM Page 4 Contents Before you start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-6 Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 Main Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 Hooking up the unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-11 Operating USB Flash Drive . . . . . . . . . . . . . . . . . . . . . . . . . .11 Auto setup . . . . . . .
Before you start Recordable and Playable discs This unit can play and record all widely-used DVD types. The table below shows some specific compatibility differences depending on the disc types.
DR389-W_BARELLK 3/21/08 6:46 PM Page 6 Notes on discs Depending on the conditions of the recording equipment or the CD-R/RW (or DVD±R/RW) disc itself, some CD-R/RW (or DVD±R/RW) discs cannot be played on the unit. Do not attach any seal or label to either side (the labeled side or the recorded side) of a disc. Do not use irregularly shaped CDs (e.g., heart-shaped or octagonal). Doing so may result in malfunctions.
DR389-W_BARELLK 3/21/08 6:46 PM Page 7 Remote control d a a * POWER: Switches the unit ON or OFF. AV/INPUT: Changes the input source (Tuner, AV1-2, or DV IN). OPEN/CLOSE: Opens and closes the disc tray. 0-9 numerical buttons: Selects numbered options in a menu. CLEAR: Removes a mark on the Marker Search menu. TV Control Buttons: You can control the sound level, input source, selects TV’s channel and power switch of your TV. b SCAN (m / M): Search backward or forward. REC (z): Starts recording.
DR389-W_BARELLK 3/21/08 6:46 PM Page 8 Main Unit a b c d e f g j k h i l a 1 / I (POWER button) Switches the unit ON or OFF. g x (STOP) Stops playback or recording. b Disc Tray Insert a disc here. h z (REC) Starts recording. Press repeatedly to set the recording time. c OPEN/CLOSE (Z) Opens or closes the disc tray. i P/S (Progressive Scan) Switches the progressive mode. 576i(OFF), 576p(ON) d Remote Sensor Point the remote control here.
DR389-W_BARELLK 3/21/08 6:46 PM Page 9 Hooking up the unit c Audio/Video connection Connect one end of the video(yellow) cable to the VIDEO OUTPUT jack on the unit and other end to the VIDEO INPUT jack on your TV. Connect one ends of the audio cables (red and white) to the analog AUDIO OUTPUT jack on the unit and other ends to the AUDIO INPUT jack on your TV. a Antenna connection Connect the Terrestrial TV antenna to the ANTENNA IN jack on the unit.
DR389-W_BARELLK 3/21/08 6:46 PM Page 10 Hooking up the unit - more you can do Component connection Connect one end of the component(Y PB PR) cable to the COMPONENT OUTPUT jack on the unit and other end to the COMPONENT INPUT jack on your TV. Connect one ends of the audio cables (red and white) to the analog AUDIO OUTPUT jack on the unit and other ends to the AUDIO INPUT jack on your TV.
Connecting to the INPUT 1 or AV IN 2 Jacks Operating USB Flash Drive Connect the input jacks (INPUT 1 or AV IN 2) on the unit to the audio/video out jacks on your accessory component using audio/video cables. ON REMOTE 1. Insert an USB Flash Drive to the USB port: – 2 Displays the HOME menu: HOME 3 Select a main option: bB [MUSIC], [PHOTO] or [MOVIE] option 4 Select the [USB] option: vV 5 Displays corresponding menu list: ENTER For details of operations on each files, refer to relevant pages.
DR389-W_BARELLK 3/21/08 6:46 PM Page 12 [Program Edit]: Change the settings of a channel manually. [Station Rename]: Change a name of the selected channel. [Move]: Moves the program’s location on the program list. [Delete]: Delete the selected channel from programmed channel list. [NICAM Auto/off]: Sets the channels for the NICAM broadcast. Auto setup When the first time to turn on the unit, the initial setup wizard sets the language, clock and channels automatically.
Using the Home Menu - more you can do Adjust the SETUP settings Setup ON REMOTE Start – Displays SETUP menu.
DR389-W_BARELLK 3/21/08 6:46 PM Page 14 Adjust the SETUP settings - more you can do Adjust the language settings Adjust the general settings Display Menu – Select a language for the Setup menu and on-screen display. Auto Programming – This option automatically scans and sets the available channels. [Start]: Start the channel scanning. Program Edit– This option allows you to add channels and edit preset channels. [Edit]: Displays the screen which show preset channel list and channel editing options.
DR389-W_BARELLK 3/21/08 6:46 PM Page 15 Sampling Freq. (Frequency) – Selects the sampling frequency of the audio signal. [48 kHz]: In case of DVD with 96KHz sampling, Output is converted to 48kHz. If your receiver or amplifier is NOT capable of handling 96 kHz signals, select [48 kHz]. [96 kHz]: The digital audio signals are output in their original sampling format. Adjust the recording settings DRC (Dynamic Range Control) – Make the sound clear when the volume is turned down (Dolby Digital only).
Adjust the disc settings Before finalizing, check the characteristics between the disc type in the table below. The finalized DVD-RW discs can be unfinalized so that the disc can be edited or recorded to again. -RW +R +RW Initialize – You can Initialize a DVD by pressing ENTER while [Start] is selected. The [Initialize] menu appears. The unit starts formatting after confirmation. You can select a mode between VR and Video for DVD-RW discs.
Moving to another title/track/file DVD ALL Displaying disc information ON REMOTE 1 Play the disc loaded on the unit PLAY 2 Displays current status of playback: DISPLAY 3 Displays the playback menu: DISPLAY 4 Select an item: vV 5 Adjust the playback menu settings: bB 6 Exit the disc playback menu DISPLAY Displaying disc Information Adjusting playback menu item You can select an item by pressing vV and change or select the setting by pressing b B.
Displaying information while watching TV During viewing the TV, Press DISPLAY to display the information displayed on-screen. a b c Play a disc ON REMOTE 1 Open the disc tray: Z) OPEN/CLOSE (Z 2 Insert a disc: - 3 Close the disc tray: Z) OPEN/CLOSE (Z 4 Adjust the disc menu settings: vVbB A disc menu may not appears on the screen depending on the disc. d e a Indicates disc name and format. b Indicates the record mode, free space, and elapsed time progress bar.
Frame-by-Frame playback DVD ALL DivX Viewing the Title menu DVD Press PAUSE/STEP (X) repeatedly to play Frame-by-Frame playback. Fast forward or fast reverse DVD ALL ACD DivX Press SCAN (m or M) to play fast forward or fast reverse during playback. You can change the various playback speed by pressing SCAN (m or M) repeatedly. Press PLAY (N) to continue play at normal speed.
DR389-W_BARELLK 3/21/08 6:46 PM Page 20 Notice for displaying DivX® subtitle Playing DivX® movie files ON REMOTE If the subtitle does not display properly, press PAUSE/STEP when the subtitle appears. Then press and hold SUBTITLE about 3 seconds to display the language code menu. Use b / B to change the language code until the subtitle is displayed properly. Press PLAY (N) to continue playback.
DR389-W_BARELLK 3/21/08 6:46 PM Page 21 Playing musics in random order Listening to a music ON REMOTE When you select the [RANDOM] option on the Music List menu then press ENTER, the unit automatically begins random playback and “RANDOM” appears on the menu screen. To return to normal playback, select [Random] option again then press ENTER.
DR389-W_BARELLK 3/21/08 6:46 PM Page 22 Viewing photo files as a slide show Viewing a photo ON REMOTE 1 Displays the HOME menu: HOME 2 Selects a [PHOTO] option: bB 3 Selects an option that contains photo file: v V ENTER 4 Selects a photo from the menu: vVbB 5 Displays the selected photo in full screen: PLAY 6 Returns to the Photo List: STOP To slide show photos in the [Photo list], select the [Slide Show] option on the left side of the screen then press ENTER, The [Slide Show] menu appears
DR389-W_BARELLK 3/21/08 6:46 PM Page 23 Recording Follow the instruction below to record a TV channel or other source. The recording continues until the media is full or you stop the recording. 1 Selects a recording mode: You can select a recording mode on the SETUP menu.
DR389-W_BARELLK 3/21/08 6:46 PM Page 24 Timer Recording Troubleshooting Even though the timer is set, the unit will not record when: – There is no disc loaded. – A non-recordable disc is loaded. – [Disc Protect] option is set to [ON] in the Setup menu (see page 16). – The unit is in operating (recording, deleting etc.). – There are already 99 titles (DVD-RW, DVD-R), 49 titles (DVD+R, DVD+RW) recorded on the disc. You cannot enter a timer program when: – A recording is already underway.
DR389-W_BARELLK 3/21/08 6:46 PM Page 25 Before editing Chapter search -RWVR This unit offers various edit options for various disc types. Before you edit, check the disc type, and select the option available for your disc. You can select the start of a title by searching a chapter. Select a title that you want to search and press ENTER. Select [Chapter] in the [Search] option from the menu on the left of the screen, and press ENTER to display the [Chapter List] menu.
DR389-W_BARELLK 3/21/08 Time search -RWVR 6:46 PM -RWVideo +RW Page 26 +R -R You can select the start of a title by searching time. Select a title that you want to search and press ENTER. Select [Time] in the [Search] option from the menu on the left of the screen and press ENTER to display the [Search] menu. Use b B to find the time you want to start. Each press of b B to moves 1 minute and press and hold b B to moves 5 minutes. Press ENTER to watch a title from a selected time.
DR389-W_BARELLK 3/21/08 6:46 PM Page 27 Naming a title Protect a title -RWVR When a title is recorded by this unit, the title name will be named by a number. You can change a title name by using this function. Use this function to protect a title against accidental recording, editing or deleting. Select a title you want to protect and press ENTER. Select [Protect] option from the menu on the left and press ENTER. The lock mark will appears on the title thumbnail.
DR389-W_BARELLK 3/21/08 6:46 PM Page 28 Language Codes Use this list to input your desired language for the following initial settings: Disc Audio, Disc Subtitle, Disc Menu.
Troubleshooting General The power does not turned on. b Plug the power cord into the wall outlet securely. There is no picture. b Select the appropriate video input mode on the TV so the picture from the unit appears on the TV screen. b Connect the video connection securely. Picture noise appears. b You are playing a disc recorded in a colour system that is different from your TV. b The video signal from the external component is copy-protected. b Set the resolution that your TV can accept.
DR389-W_BARELLK 3/21/08 6:46 PM Page 30 Resetting the unit If you observe any of the following symptoms. The unit is plugged in, but the power will not turn on or off. The front panel display is not working. The unit is not operating normally. You can reset the unit as follows. Press and hold the POWER button for at least five seconds. This will force the unit to power off then turn the unit back on. Unplug the power cord, wait at least five seconds, and then plug it in again.
