User guide

Tr
oubleshooting
41
Reference
Symptom
No
power.
No
picture
on the LCD or
TV
(including
video from
another
unit).
No
sound.
The DVD
player
does not
start
playback.
No
response
when buttons
are
pressed.
The remote control does
not work
properly.
Correction
?
Plug
the
power
cord into the wall outlet
securely.
?
Recharge
the
battery.
?
Connect the video cable into the
jacks securely.
?
Set the
A/V IN/OUT
switch
correctly.
-
While
you
are
playing
a
disc,
set the
A/V IN/OUT
switch to OUT mode
-
While
you
are
viewing
video from other
equipment,
set the
A/V IN/OUT
switch to In mode.
?
Select a LCD mode other than OFF.
?
Adjust
the
brightness.
?
Select the
appropriate
video
input
mode on the TV so
the
picture
from the DVD
player appears
on the
screen.
?
Select the correct
input
mode of the audio receiver so
you
can listen to the sound from the DVD
player.
?
Connect the audio cable into the
jacks securely.
?
Insert a
playable
disc.
(Check
the disc
type,
color
system
and
Regional
code.)
?
Cancel the
Rating
function or
change
the
rating
level.
?"
"
may appear
on the screen
during operation.
?
Operate
the remote control within about 23 ft
(7 m).
Cause
?
The
power
cord is disconnected.
?
The
battery
is
discharged.
?
The video cable is not connected
securely.
?
The
A/V IN/OUT
switch is not set
correctly.
?
LCD mode is set to OFF.
?
Check that
Brightness
control is set to "--".
?
The TV is not set to receive DVD
signal output.
?
The
equipment
connected with the audio cable is
not set to receive DVD
signal output.
?
The audio cables are not connected
securely.
?
An
unplayable
disc is inserted.
?
The
Rating
level is set.
?
Some discs
prohibit
certain
operations.
?
The remote control is too far from the
DVD
player.