Owners Manual
Table Of Contents
- PRODUCT FEATURES
- SAFETY INSTRUCTIONS
- PRODUCT OVERVIEW
- INSTALLATION
- Installation Overview
- Product Specifications
- Installation Location Requirements
- Clearances
- Leveling the Dryer
- Reversing the Door
- Installing the Side Vent Kit
- Stacking the Dryer
- Venting the Dryer
- Connecting Gas Dryers
- Connecting Electric Dryers
- Special Electrical Requirements
- Final Installation Check
- Installation Test (Duct Check)
- OPERATION
- SMART FUNCTIONS
- MAINTENANCE
- TROUBLESHOOTING
- WARRANTY
- CARACTÉRISTIQUES DU PRODUIT
- CONSIGNES DE SÉCURITÉ
- APERÇU DU PRODUIT
- INSTALLATION
- Aperçu de lʼinstallation
- Caractéristiques du produit
- Conditions requises pour l'emplacement d'installation
- Dégagements
- Mise à niveau de la sécheuse
- Changement du côté de la porte
- Installation de la ventilation latérale.
- Superposition de la sécheuse
- Ventilation de la sécheuse
- Raccordement des sécheuses au gaz
- Raccordement des sécheuses électriques
- Conditions de l'alimentation particulières
- Vérification finale de l'installation
- Essai d'installation et vérification des conduits d'évacuation
- FONCTIONNEMENT
- FONCTIONS INTELLIGENTES
- ENTRETIEN
- DÉPANNAGE
- GARANTIE

43MAINTENANCE
ENGLISH
TROUBLESHOOTING
FAQs: Frequently Asked Questions
Q: When I press a button, why does my dryer beep and then nothing happens?
A: The Child Lock feature is turned on. To turn off Child Lock, turn the dryer on, then press and hold the
button that has *Child Lock on or under it for 3 seconds.
Q: Why does my dryer take so long to dry clothes?
A: Proper airow is critical to the efcient operation of clothes dryers. A lint lter which is full of lint or
clogged with fabric softener sheet residue can reduce the airow to the point that the time required
to dry clothing will be greatly increased. Another factor affecting dry time is your home exhaust
system. An exhaust system which is dirty and clogged with lint, or is excessively long, needs to be
professionally cleaned or repaired.
Q: Why does my dryer start by itself every few minutes?
A: This is how the Wrinkle Care feature works. The dryer runs briey every few minutes for up to 3
hours after the cycle nishes. This feature is designed to help prevent wrinkles from setting in when
the dryer is not unloaded immediately after the cycle is nished.
Q: Why does my dryer show 3 minutes when I select the Steam Fresh™ cycle?
A: When the Steam Fresh™ cycle is selected, the dryer displays the recommended number of garments
for the cycle, not the estimated cycle time, until the cycle is started. Use the More Time or Less Time
buttons to adjust the load size setting for the number of garments you desire. For a large load or
single bulky item use the
(big) setting.