DVD PLAYER/ VIDEO CASSETTE RECORDER OWNER'S MANUAL MODEL : DC488/DC488D PAL BZ03 Before connecting, operating or adjusting this product, carefully and read this instruction booklet please completely. Internet Address:http://www.lg.
Precautions / Safety Important notes on this unit SERIAL NUMBER: The serial number is found CAUTION the back of on this unit. This number is unique to this unit and not available others. You should record requested information here and retain this guide as a permanent record of your purchase. RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK Model No. Serial No.
Table of Contents Introduction SafetyPrecautions.........................2 2 Important notes on controlling this unit . . . . . . TableofContents..........................3 BeforeUse..............................4-5 PlayableDiscs...........................4 Operation with Audio CD and MP3/WMA PlayinganAudioCDandMP3/WMADisc. NoteonMP3/WMARecordings. Disc. 26-27 .26 .26 Pause.............................27 . . . . . . . . . . . . . . MovingtoanotherTrack...............
Before Use Playable Disc-related terms Discs Title The main film content (8cm/12cmdisc) or Video CD (VCD) (8cm/12cmdisc) Audio CD (8cm/12cmdisc) In addition, this unit play can a DVD±R, DVD±RW, Kodak PICTURE CD and CD-R audio titles, MP3, WMA (DVD only) DVD or or CD-RW that contains JPEG files and SVCD also. or accompanying feature content additional feature content, or music album. Each title is assigned a title reference number enabling you to locate it easily.
Before Use (Cont'd) Precautions Storing After the unit Handling When shipping the unit original shipping carton and packing materials come in handy. For maximum protection, re-pack the unit as it was originally packed at the factory. The When the unit setting picture and sound of a nearby TV or radio may be distorted during playback. In this case, position the unit The away from the TV or radio, removing the disc.
Front Panel and Window Display POWER Tape Eject Switches the unit to ON or OFF. Reverse Go to Skip/Scan, Rewind ( ) beginning of current chapter/track or Press and hold for two seconds for a fast to PREVIOUS chapter/track. search. reverse Rewinds the tape. Forward Skip/Scan, Fast-Forward ( chapter/track. ) Go to NEXT Press and hold for two seconds for a fast forward search. Winds the tape forwards. STOP ( A ) Stops playback. Disc Tray Insert a disc here.
Remote Control POWER Switch this unit ON or OPEN/CLOSE EJECT Open or close the the disc OFF. DVD/VCR select button operational mode of remote control. - Selects - AV 0-9 numerical buttons Select numbered items in a menu. Select input into tape. TV/VCR Switch between your TV's tuner and the VCR's internal tuner. (see TV VOL +/--: MUTE: Turns ? Access - - ? ? menu ? PR/TRK(+/-) ? (DVD) ? camera angle if available ZOOM video image. REC/ITR on and off.
Rear Panel VIDEO/AUDIO Connect to a OUT(Left/Right) (DVD/VCR OUT) inputs. TV with video and audio COMPONENT/PROGRESSIVE SCAN VIDEO OUT (DVD EXCLUSIVE Connect to a TV with Y Pb Pr AERIAL AUDIO OUT Connect the aerial Connect to using this jack. (Y Pb Pr) OUT) inputs. (Left/Right) (DVD EXCLUSIVE OUT) amplifier, receiver or stereo system. an EURO AV2 DECODER Connect to pay-TV decoder another video recorder.
Connections Tips Depending your TV and other equipment you wish to are various ways you could connect the unit. Please refer to the manuals of your TV, Stereo System or other devices as necessary to make the best connections. For better sound reproduction, connect this unit's AUDIO OUT jacks to the audio in jacks of your amplifier, receiver, stereo or audio/video equipment. See "Connecting to optional equipment" on page 10.
Connections Connecting (Cont'd) Optional Equipment to Notes -- Connecting to an amplifier equipped with channel analog stereo or Dolby Pro Logic II/Pro Logic two Connect the Left and this AUDIO OUT the capabilities of produce a strong, -- Right jacks right in jacks on your amplifier, system, using the audio cables.
Before Tuning Operation in a - VCR part video channel on your TV 7 Notes The output frequency of this video recorder (VCR) is set at UHF channel 36. If channel 36 is already used by another TV station, or if the picture is distorted, you can change the transmitter channel of your VCR. Stages 5 8 will show you how to change the output frequency of your VCR. ~ Your TV receives signals from the video recorder (VCR) like another TV station.
Before Setting Operation the clock - VCR part To set the colour system Manually The clock in your VCR controls time and date settings for your VCR. 1 Press i. 1 Press 1 or 2 to select TIME DATE. 2 The main 3 Press 1 or Press 3 or 4 Press OK. :. - - -- -- -- menu will appear on the TV screen. 2 to select the SYSTEM and press OK. 4 system used. HHMNDDMMYY -- Press i. to select according to the COLOUR --- .
Before How to Operation using VCR part - the main Tuning menu This VCR menus The can easily be programmed by using displayed on screen. menus are the controlled from the Remote Control Handset. 1 2 If the TV broadcast by pressing menu will appear on the TV section 1 Press i button. screen. Automatically is weak your VCR may signal not detect the necessary information and will not be able to store them correctly.
Before Tuning In certain Operation VCR part - in TV Stations areas Press 2 to select STATION Manually of the country broadcast 5 your signals name Press OK. may be too weak for your VCR's automatic tuning process to find or assign TV stations correctly. The TV station name list will appear. TNT MTV3 You must tune in these weaker broadcast stations manually that you may so TV station. NELON TRT in order for your VCR to store them.
Before Operation Changing - VCR part the order of TV Stations Deleting After tuning TV stations into your VCR you may wish to change the order in which they are stored without having to retune them against! The instructions given on this page will show you how you can simply move them into your desired order. 1 Press i. The main menu will appear on the TV Press 1 or 2 to select the PR SET. Press OK. TV Stations After tuning TV stations into your VCR you may wish to delete a station.
Before General This manual Operation - DVD part Temporary Explanation the basic instructions for gives operating require specific operation or allow only limited operation during playback. When this occurs, the symbol appears on the TV screen, that the indicating operation is not permitted by this unit or is not available On-Screen The TV general playback screen. 1 2 3 Press 3 or can be highlighted. the change The number buttons (e.g.
Before Initial You - DVD General Settings TV Aspect DVD 4:3 Letterbox: Select when a standard 4:3 TV is Operation connected. theatrical Displays images picture. bars above and below the Press SETUP. The setup part Picture Settings set your own Personal Preferences on this unit. can Initial 1 Operation (Continued) menu with masking 4:3 Panscan: Select when a conventional TV set is appears. connected.
Before Operation (Continued) - DVD Sound Digital Others Audio Output Each DVD disc has The DRC, Vocal, PBC and Auto of audio output variety options. player's Digital Audio Output according to the Set the part a type of audio system you use. DOLBY DIGITAL/PCM: Select "DOLBY DIGITAL/PCM" between On and Off. Disc Audio Disc Subtitle DTS decoder, MPEG decoder.
Before Operation (Continued) - DVD Parental Control Rating Code Country DVD Enter the code of DVD Movies on DVDs may contain scenes not suitable for children. Therefore, discs may contain Parental Control information that applies to the complete disc or to certain part scenes on the disc. These scenes are Disc Subtitle are were PREATION RU Disc Menu Rating Country The Parental Control feature allows country-dependent.
with Operation Playing You will a only tape playback, Shuttle : or still picture press F or G. You can reach the following playback speeds. (-7xplay, -3xplay, -play, still, 1/19 slow, play, 2xplay, 7xplay) Slow motion tape 5 During playing back be able to load and eject video cassettes when your VCR is plugged into the mains. Your VCR may also playback recordings from NTSC To switch off the slow motion and shuttle, press the desired function. tapes (on PAL TV).
Operation with Instant Timer tape Press LP if you wish to record in Recording (ITR) Your VCR allows you to make variety of simple methods: recordings using SP will a Recording (ITR) start recording for a set period of time or until the immediately Your VCR incorporates Long Play (LP) time record up to 180 minutes using Standard Play (SP); using LP you will be able to record up to 360 minutes. Please note there will be when quality as SP.
with Operation tape recording using On Screen Display Timer 6 You may set up to seven timer record events within one month of the current date. pressing Note 2 Press i. Press 1 or 2 to select REC. Press OK. Press OK to start setting the timer record event.
Operation Playing with DVD and Video CD DVD and Video CD a Playback Setup Turn on VCD2.0 DVD the TV and select the video nected to the DVD General Features Note VCD1.1 input source con- player. features may also be available Audio system: Turn on the audio system and select the input source connected to the DVD 1 Moving player. Press OPEN/CLOSE to open the disc Unless stated otherwise, all operations described use the remote control.
with DVD and Video CD Operation General Features Still Picture and VCD2.0 DVD Frame-by-frame playback VCD1.1 1 Press PAUSE/STEP The player Video CDs (continued) will now a Repeat All icon appears the TV on screen. Repeat mode, press REPEAT a third time. Repeat Off icon appears on the TV screen. 3 To exit The On 1 Press m or M during playback. The player will now go into SEARCH mode.
with DVD and Video CD Operation General Features Zoom VCD2.0 DVD (continued) VCD1.1 Checking during playback or still playback 2 Use the 1 2 zoomed 3 4 buttons to the through picture. 3 Press CLEAR to resume normal the Then, press the appropriate number button to select option. Or, use the 1/2/3/4 buttons to highlight your selection, then press ENTER. magnification level move playback or the contents of DVD Video DVDs may contain menus that allow you to access special features.
with Audio CD and MP3 Discs Operation Playing an Audio CD and MP3/WMA Disc CD MP3 The DVD Notes MP3/WMA Insert 1 play Recordings a files that have The player tray. About CD; Audio CD menu appears on the TV go to step 4. MP3/WMA disc; The MP3/WMA-JPEG choice menu appears on the TV screen. Go to step 2 screen MP3/WMA Disc limited Press 3/4 to select the MP3/WMA then press ENTER. appears on the TV screen. to the MP3/WMA-JPEG 1. 2. 3. 4.
with Audio and MP3/WMA Disc Operation CD Pause MP3 1 Press PAUSE/STEP WMA Repeat during playback. 2 To return to playback, PAUSE/STEP again. press PLAY or To repeat 1 press CD to another Track MP3 WMA Press . twice track. case to briefly step back to the previous of audio CD, to go directly to any track, enter using the numbered buttons (0-9) during playback.
Operation Viewing a with JPEG Disc JPEG disc JPEG Player can play discs with JPEG files and Kodak picture CD. Before playing JPEG recordings, read the notes on JPEG Recordings on right. This DVD 1 Insert a disc and close the TV menu appears on the screen. JPEG menu appears on the TV > once 1 Press PAUSE/STEP during viewing a picture to the previous file. to or screen. JPEG player Folder2 Folder4 slide show.
Programmed Playback CD VCD2.0 with Audio CD Programmed Playback VCD1.1 function enables you to store your favorite tracks from any disc in the player memory. Program Program with Video CD Note On a setup Video CD with PBC, you must set PBC to Off on the menu to use the Program function. See page 18. contain 30 tracks. can Press PROGRAM 1 WMA Programmed Playback and MP3/WMA Disc The MP3 mode to enter the during playback or in Program Edit mode.
Additional On Screen Operation - VCR part Video Doctor Display You may easily display the current time or tape counter, amount of tape left, day, month, year, day of week, programme channel, tape speed and operational mode of your VCR will appear on the TV screen. If a recording is taking place these On Screen Displays will not be recorded onto the tape. (Self-Diagnosis) This feature informs you that there is a problem with error messages will appear on the TV your VCR. These screen. 1 Press i.
Additional Operation Hi-Fi Stereo Sound VCR part - System 2 playback Hi-Fi stereo sound. digital stereo sound to record and playback the stereo NICAM a 4:3 or back Wide-Screen programmes programmes as normal. and recording Normal format 16:9: another Hi-Fi VCR. digital AUTO, Wide-Screen and Normal Only playing back and recording Wide-Screen recordings (16:9). for format Your VCR's NICAM to select: as Only for playing back recordings (4:3). and two VHS Hi-Fi stereo audio tracks.
Additional Operation Last Condition DVD This CD player - DVD part Video Mode Memory VCD1.1 memorizes the DVD user settings for the last disc VCD2.0 Setting VCD1.1 With certain discs, the playback picture may be flickon straight lines. That interpolation or De-interlace is not that you have viewed.
Special Recording Copying from DVD To VCR This unit allows you to copy the contents of VHS tape with a press of the COPY button. Recording from a DVD to a sure recorder With this video recorder you an external source, such as recorder Note Be "Progressive Scan" to set another video to "Off on the or a can make copying recordings from from another video camcorder. setup menu." If the DVD you protected, Note to copy is copy you may not be able to copy the disc.
Controlling You can Your TV with the control the sound level, switch of your TV with the You can control your TV input source, and power supplied remote control. using Remote Supplied the buttons below Controlling other TVs with the remote control You can control the sound level, input source, and power switch of non-LG TVs as well. If your TV is listed in the table below, set the appropriate manufacturer code. 1.
Troubleshooting Check the following guide for the possible cause DVD or VCR do not before problem a service. contacting Cause Symptom work of DVD or Correction VCR button is not switched Refer to page 2. properly. properly. No power. The power cord is disconnected. Plug the power securely. The power is on, but the DVD player does not work. No disc is inserted. Insert a disc. (Check that the DVD or, audio CD indicator in the display window is lit.
Language Code Enter the (See appropriate 17).
Country Code Enter the appropriate List code number for the initial setting "Country Code" (See page 19).
Specification General Power requirements AC 110-240V, 50/60 Hz Power consumption 19W Dimensions Mass 430 X 78.5 X 270 (approx.) 4.2 (approx.
P/NO : 3834RV0008S
