Owner's Manual

Operating 21
Operating
3
Sleep Timer Setting
Press SLEEP on the remote control repeatedly to select
delay time between 10 and 180 minutes. After delay time,
the unit will turn o. (You can see the following order,
180 ->150 -> 120 -> 90 -> 80 -> 70 -> 60 -> 50 -> 40 ->
30 -> 20 -> 10). To cancel the sleep function, press SLEEP
repeatedly until the display window get bright.
• Press SLEEP. The remaining time appears in the
display window.
• Sleep function will work after dimmer function.
,
Note
Dimmer
Press SLEEP once. The display window will
be darkened by half. To cancel it, press SLEEP
repeatedly until the display window get bright.
• After setting a clock function, you can set
alarm function.
• If you set the clock and alarm, you can check
the time and alarm icon “
(
“ by pressing
CLOCK although the unit is turned o.
• During playback, press TIMER two times
when the alarm icon “
(
“ is displayed. You
can check the setting state.
• If you activate the alarm, the alarm icon “
(
“
will appear in the display window.
• If you deactivate the alarm, the alarm icon
“
(
“ will disappear in the display window.
• Alarm function only works when the unit is
turned o.
• If the time you set is up, the unit will be
turned on automatically.
,
Note
Advanced Operations
Listening to the sound from
your external device
The unit can be used to play the sound from many
types of external device. (Refer to the page 15)
1. Connect the external device to the AUX IN(L/R)
connector of the unit.
2. Turn the power on by pressing
1
/
!
(Power).
3. Select the AUX function by pressing FUNC. on
the unit.
4. Turn the external device and start playing it
CM4330-FB_DRUSLLK_ENG_6486.indd 21 2014-08-01  3:30:08