Owner’s Manual
Table Of Contents
- IMPORTANT SAFETY INSTRUCTIONS
- PRODUCT OVERVIEW
- INSTALLATION
- Before Installing
- Installing the Cooktop
- Electrical Connections
- Important Safety Instructions
- Providing the Electrical Connection
- Electrical Requirements
- Electrical Connection
- Where Local Codes Permit Connecting the Appliance-Grounding Conductor to the Neutral (White) Wire
- If Cooktop is Used in a New Branch Circuit Installation (1996 NEC), Mobile Home, Recreational Vehicle, or where Local Codes Do Not Permit Grounding to the Neutral (White) Wire
- Installing the Cooktop Unit
- Final Check
- Electrical Connections
- OPERATION
- SMART FUNCTIONS
- MAINTENANCE
- TROUBLESHOOTING
- LIMITED WARRANTY
24 OPERATION
2 Selecting a power level turns on the cooking
zone. The cooking zone indicator remains lit
and the power level is stored.
a Figure A b Figure B
NOTE
• If a power level is not selected, the power
settings will turn off after 3 seconds.
Readjusting the Power Level
1 Press the desired cooking zone in the display
to bring up the Power Levels popup.
2 Press the desired level in the Power Levels
popup. If no selection is made, the Power
Level popup disappears after 3 seconds and
the power level remains the same.
NOTE
• Once the power level is changed, the burner
operation is temporarily stopped and then
restarted at the changed power level.
Power Level Indicator
• Cooking element LED bar
- The range provides an LED bar for each
cooking element on the cooktop. Check the
display and use the LEDs to monitor the power
levels of the elements.
AB
2
1
1
2
3
4
5
6
7
8
9