Use and Care Manual

22 OPERATION
Control Panel
Control Panel Features
Locations of Surface Elements and Controls
The position of the cooking zone being controlled is shown in each cooking zone icon on the control panel.
The diagram below is for the 36" cooktop. The 30" control panel only includes 4 cooking zone icons.
Throughout this manual, features and appearance may vary from your model.
Hot Surface Indicator
• If this icon is displayed on the screen, be careful
because the ceramic glass surface is hot.
- Failure to take care may result in burns or
injuries.
• After you turn off the cooking zone, the icon is
displayed continuously until the ceramic glass
surface cools down.
- If the temperature near the product is high, it
may take longer for the ceramic glass surface
to cool down.
• Even after the indicator light has turned off, be
careful because the surface may still be hot.
Surface elements and controls Surface elements and controls
a
POWER
Press and hold for 1 second to turn
the entire cooktop ON. When it is
ON, the cooktop is in standby
mode until a cooking zone is
activated.
e
Control
Lock
Press and hold for 3 seconds to
lock the control panel.
b
Simmer
Press the Simmer key with the
cooking zone selected to simmer
sauces or stews.
f
Cooking
Zone
Check the status of a cooking zone
and adjust the cooking zone. For
details, see "Operating
Instructions".
c
Pause
Sets the active cooking zone to
minimum output. Press to activate
or deactivate.
g
Timer
Press to set a timer. For details,
see "Operating Instructions".
d
Wi-Fi
Connect the appliance to a home
Wi-Fi network.
h
Power
Level
Select the power level for the
cooking zone.
Hot surface indicator
en-us_main.book.book Page 22 Friday, October 27, 2023 1:06 PM