Owner’s Manual
Table Of Contents
- IMPORTANT SAFETY INSTRUCTIONS
- PRODUCT OVERVIEW
- INSTALLATION
- Before Installing
- Installing the Cooktop
- Electrical Connections
- Important Safety Instructions
- Providing the Electrical Connection
- Electrical Requirements
- Electrical Connection
- Where Local Codes Permit Connecting the Appliance-Grounding Conductor to the Neutral (White) Wire
- If Cooktop is Used in a New Branch Circuit Installation (1996 NEC), Mobile Home, Recreational Vehicle, or where Local Codes Do Not Permit Grounding to the Neutral (White) Wire
- Installing the Cooktop Unit
- Final Check
- Electrical Connections
- OPERATION
- MAINTENANCE
- TROUBLESHOOTING
- LIMITED WARRANTY
19OPERATION
ENGLISH
Select the Cooking Zone and Heat Setting
Single Element (Left Rear, Right Front, Right Rear)
1 To select the cooking zone, press the corresponding cooking zone’s selector. “0” will blink on the
selected cooking zone’s indicator.
2 To set and adjust the power level, slide the Power level / Time selector left or right.
NOTE
• If you do not set the power level after selecting a cooking zone, the cooking zone turns off automatically
after 7 seconds.
• If you set the power level to 0, the cooking zone will turn off after 3 seconds.
Dual Surface Unit (Left Front)
The dual surface unit features inner and outer elements. You can select either element depending on the
cookware you are using.
1 To select the dual element cooking zone, press the left front cooking zone selector. “0” will blink on the
selected cooking zone’s indicator.
2 To set the dual element mode, press the Dual selector button. When the indicator turns on, the unit
operates in Dual mode.
3 To set and adjust the power level, slide the Power level / Time selector left or right.