Owner’s Manual
Table Of Contents
- IMPORTANT SAFETY INSTRUCTIONS
- PRODUCT OVERVIEW
- INSTALLATION
- Before Installing
- Installing the Cooktop
- Electrical Connections
- Important Safety Instructions
- Providing the Electrical Connection
- Electrical Requirements
- Electrical Connection
- Where Local Codes Permit Connecting the Appliance-Grounding Conductor to the Neutral (White) Wire
- If Cooktop is Used in a New Branch Circuit Installation (1996 NEC), Mobile Home, Recreational Vehicle, or where Local Codes Do Not Permit Grounding to the Neutral (White) Wire
- Installing the Cooktop Unit
- Final Check
- Electrical Connections
- OPERATION
- MAINTENANCE
- TROUBLESHOOTING
- LIMITED WARRANTY
10 INSTALLATION
Unpacking the Cooktop
1 Unpack and visually inspect the cooktop for
any damage or missing components.
Model and Serial Number Location
The model and serial numbers are located on a
plate on the bottom of the cooktop. Please record
them in this guide; you will need them for
warranty registration.
Technical Specifications
NOTE
• The maximum power of each cooking zone depends on the size and material of the cookware used.
Models CBED2415B
Description Radiant Cooktop
Electrical
Specifications
Connection
voltage
240/208 VAC 60 Hz., 14.6 A/12.5 A
Maximum
connected power
load
3500 W/2600 W
Cooktop Dimensions 23 5/8" (600 mm) (W) x 3 3/8" (86 mm) (H) x 20 7/16" (520 mm) (D)
Countertop Cutout Dimensions
22" - 22 1/8" (558 mm - 562 mm) (W) x 18 13/16" - 19" (478 mm -
482 mm) (D)
Cooking Zones
Position Size Power
Left Front
5"/8"
(127 mm/203 mm)
1000 W/2000 W
Left Rear 7" (178 mm) 1500 W
Right Rear 6" (152 mm) 1200 W
Right Front 6" (152 mm) 1200 W