Installation Manual

6 INSTALLATION
Preparing the Installation Location
Important Installation Information
• All electric cooktops run off a single phase, three-wire or four-wire cable, 240/208 volt, 60 hertz, AC-only
electrical supply with ground.
• Minimum distance between cooktop and overhead cabinetry is 30" (762 mm).
• Make sure the cabinets and wall coverings around the cooktop can withstand the temperatures (up to 90
℃ [194 ℉]) generated by the cooktop.
Dimensions and Clearances
a Do not obstruct these areas.
b Approximate location of junction box
- Dimension/Clearance CBED2415B
A Width of upper plate 23 5/8" (600 mm)
B Depth of upper plate 20 7/16" (520 mm)
C Height of cooktop base 2 3/16" (56 mm)
D Width of cooktop base 21 9/16" (548 mm)
E Depth of cooktop base 18 7/16" (468 mm)
F Width of cutout 22" - 22 1/8" (558 mm - 562
mm)
G Depth of cutout 18 13/16" - 19" (478 mm -
482 mm)
H Distance from side edge of cutout to side of counter
2 1" (26 mm)
I Distance from edge of cooktop to nearest combustible wall (either side
of unit)
1" (26 mm)
en-us_main.book.book Page 6 Tuesday, April 16, 2024 2:55 PM