Owner's Manual

6

Safety Instructions


Air Circulation
Openings in the cabinet are provided for ventilation. To
ensure reliable operation of the product and to protect it
from overheating, these openings must not be blocked
or covered.




Installing the Projector in Proper Position

Install the projector properly. Improper Installation may
reduce the lamp life and cause a fire hazard.


20°

CAUTION

Hot air is exhausted from the exhaust vent. When using
or installing the projector, the following precautions
should be taken.
– Do not put any flammable object or spray can near the
projector, hot air is exhausted from the air vents.
– Keep the exhaust vent at least 3’ (1 m) away from any
objects.
– Do not touch a peripheral part of the exhaust vent,
especially screws and metallic parts. These areas will
become hot while the projector is being used.
– Do not put anything on the cabinet. Objects put on the
cabinet will not only get damaged but also may cause
fire hazard by heat.

20°


30°

30°
Do not tilt the projector more than 20
degrees from side to side.


Do not tilt the projector more than 30
degrees from above and below.


Do not point the projector up to project an
image.


Do not point the projector down to project
an image.



Do not put the projector on either side to
project an image.

Cooling fans are provided to cool down the projector.
The fans’ running speed is changed according to the
temperature inside the projector.
Moving the Projector

When moving the projector, replace the lens cap and
retract adjustable feet to prevent damage to the lens and
cabinet.
When the projector is not in use for an extended period,
put it into a suitable case with the lens side up (supplied).





Exhaust Vents



Air Intake
CAUTION IN CARRYING OR TRANSPORTING
THE PROJECTOR
(Hot air exhaust) Vent











Air Intake Vent

– Do not drop or bump the projector, otherwise damages
or malfunctions may result.
– When carrying the projector, use a suitable carrying
case.
– Do not transport the projector by courier or any other
transport service in an unsuitable transport case. This
may cause damage to the projector. For information
about transporting the projector by courier or any other
transport service, consult your dealer.
– Do not put the projector in a case before the projector is
cooled enough.

Exhau st
V ents