Owner's Manual

Setting
42





Standby mode
There are two standby modes in the projector.
Eco ...... Low power standby mode, in this mode, network, serial control and monitor output functions are disabled.
Normal ...... in this model, network, serial control and monitor output functions can be used.

Closed Caption

Closed Caption is a text version of the program sound or other information displayed on the screen.If the input
signal contains closed captions, you can turn on the feature and switch the channels. Press the Point ▲▼
buttons to select Off, CC1, CC2, CC3 or CC4.

3
NOTE:

The Closed Caption is available only under the situation below.
• When the input signal is NTSC of composite and S-video, and the system is set according to the signal or
set on Auto.
• The system must be set on NTSC or Auto in Video System Selection. (Page 33)
• The icon of Closed Caption is displayed in gray while it is not available.
• The Closed caption is unavailable when On-Screen menu and Timer are displayed.

Lamp Control
This function allows you to change brightness of the screen.

Normal ...... Normal brightness
Eco ............Lower brightness reduces the lamp power consumption and extends the lamp life.

Test Pattern
This function enables you to test & set interior signals.There are 12 types of test pattern: gray scale,
raster gray, color bar, red, green, blue, black, white, cross hatch.

Security (Key lock and PIN code lock)
This function allows you to use the Key lock and PIN code lock function to set the security for the projector
operation.
Key lock (Except ON-STANDBY Key)

This function locks the top control and remote control buttons to prevent operation by unauthorized persons.
Select Key lock and then press the SELECT button, and select the desired item by pressing the Point ▲▼
buttons.
...........
...........

...........
Unlocked.
Lock the operation of the top control. To unlock, use the remote control.

Lock the operation of the remote control. To unlock, use the top control.

If the top control accidentally becomes locked and you do not have the remote control nearby or there is
something wrong with your remote control, contact the dealer where you purchased the projector or the
service center.

“ ”
mark on while RC key pressed when RC locked.

“ ”
mark on while top control pressed when top control locked.