Owner's Manual

39
Setting






Display

This function decides to display logo or not.
On............................ Show logo .

Off............................ Show the input image instead of the logo.




Logo (Logo and Logo PIN code lock s
etting s)
This function allows you to customize the screen logo with Logo select, Capture, Logo PIN code lock
and Logo PIN code change functions.

3NOTE:
When On is selected in the Logo PIN code lock function, Logo select and Capture functions cannot be
selected.

Logo select
This function decides on the starting-up display
from among following options.
User ........ Show the image you captured.
Default .... Show the factory-set logo.
Off ........... Show the countdown display only.

Capture

This function enables you to capture an image being projected to use it for a starting-up display.



Select Capture and press the SELECT button. A confirmation box appears and select Yes to capture the
projected image.

After capturing the projected image, go to the Logo select function and set it to User. Then the captured image
will be displayed when you turn on the projector next time.

Logo PIN code lock
This function prevents an unauthorized person from changing the screen logo.


Off
........... The screen logo can be changed freely from the Logo Menu.
On
........... The screen logo cannot be changed without a Logo PIN code.

If you want to change the Logo PIN code lock setting, press the SELECT button and the Logo PIN code
dialog box appears. Enter a Logo PIN code by following the steps below.