Owner's Manual

35
V
ideo Input


1
2

Image Adjustment

Press the MENU button to display the On-Screen
Menu. Press Point
▲▼ button to select Image
Adjustment and then press Point
► button or SELECT
button.

Press Point ▲▼ buttons to select the desired item
and then press the SELECT button to display the
adjustment dialog box. Press Point ◄► bbuuttttoon adjust
the setting value.

Image Adjust Menu

Contrast
Press Point ◄ button decrease Contrast; Press Point ►
button increase Contrast.

Brightness
Press Point ◄ button decrease Brightness; Press Point
►bbuuttttoon increase Brightness.

Color
Press Point ◄ button decrease the intensity of the color;
Press Point ► bbuuttttoon increase the intensity of the color.

Tint (only in NTSC)
Press Point ◄► button to adjust the tint value to get a
proper color balance.

Red
Press Point ◄ button lighten red tone; Press Point.► button
deepen red tone.

Green
Press Point ◄ button lighten green tone; Press Point.►
button deepen green tone.

Blue
Press Point ◄ button lighten blue tone; Press Point.►
button deepen blue tone.

Sharpness
Press Point ◄ button to decrease the sharpness of the
image; Press Point ► button to increase the sharpness of
the image.

Gamma
Use the Point ◄► buttons to adjust the gamma value to
obtain a better balance of contrast.

Noise reduction
Enable this item to reduce the snow interference
and
achieve more smooth and clear image.
Progressive
An interlaced video signal can be displayed in progressive
mode. Select one of the following options.
Off ..........Disabled.
L1 .......... For an active picture.
L2 .......... For a still picture.
Film ........For watching a film. With this function, the
projector reproduces pictures faithful to the
original film quality.