User guide

INSTALLATION
8
INSTALLATION
Installation
Appliance usage range
This appliance is intended to be used in household
and similar applications such as:
• sta kitchen areas in shops, oces and other
working environments;
• farm houses and by clients in hotels, motels
and other residential type environments;
• bed and breakfast type environments;
• catering and similar non-retail applications
Climate class
The appliance is designed to operate at the limited
range of ambient temperature, depending on
climate zones. Do not use the appliance at the
temperature out of the limit. Climate class of your
appliance is indicated on the label with technical
description inside the fridge compartment.
Class Symbol
Ambient temperature
range °C
Extended
Temperate
SN +10 ~ +32
Temperate N +16 ~ +32
Subtropical ST +16 ~ +38
Tropical T +16 ~ +43
Installation
1. Select a good location. Place your fridge-freez-
er where it is easy to use.
2. Avoid placing the unit near heat sources, direct
sunlight or moisture.
3. To ensure proper air circulation around the
fridge-freezer, please maintain sucient space
on both the sides as well as top and maintain
at least 2 inches (5cm) from the rear wall.
4. To avoid vibration, the unit must be leveled. If
required, adjust the leveling screws to compen-
sate for the uneven oor.
The front should be slightly higher than the
rear to aid in door closing. Leveling screws can
be turned easily by tipping the cabinet slightly.
Turn the leveling screws counterclockwise (
)
to raise the unit, clockwise ( ) to lower it.
5. Clean your fridge-freezer thoroughly and wipe
o all dust accumulated during shipping.
6. Install accessories such as ice cube box, etc., in
their proper places. They are packed together
to prevent possible damage during shipment.
7. Connect the power supply cord (or plug) to the
outlet. Don’t double up with other appliances
on the same outlet.
Starting
When your fridge-freezer is installed, allow it 2-3
hours to stabilize at normal operating temperature
prior to lling it with fresh or frozen foods. If power
plug is disconnected, allow 5 minutes delay before
restarting. Your fridge-freezer is now ready for use.
Operation
Identication of parts
Refer to Refrigerator drawings at the end of the
manual:
If you  nd some parts missing from your unit, they may
be parts only used in other models.
8 Bottle Rack
9 Removable Glass Shelf
10 Folding Glass Shelf
11 Fresh Converter
12 Fresh Balancer
13 Vegetable Drawer (Used to store fruits
and vegetables etc. fresh and crispy)
14 Fresh Converter
15 Ice Tray
16 Freezer Tray
17 Wire Shelf
18 Freezer Drawer
* The process of freezing occurs
the fastest on the marked shelf
19 Leveling Screw
20 Basket Door
21 Water Tank
22 Egg Tray
23 Diary Corner / Basket Door
24 Smart DiagnosisTM
25 LED Lamp