Owner's Manual
04
•
Do not install the product in an area exposed to direct sunlight or
near heat-generating equipment.
•
Do not install the product in a place where combustible gas may
leak or industrial oil or metallic particulates are present.
POWER
•
This product is for AC 220–240 V. Always check the supply
voltage before using it.
•
Be careful not to let the power plug pressed by the back of the
product.
•
Remove the power plug when you clean the product or replace
the lter.
•
Do not touch the power plug with wet hands.
•
Insert the plug into the outlet tightly after removing the moisture
and dust on it completely.
•
When unplugging the power cord, always pull it by the plug.
•
Unplug the product during thunder or lightning or when not in
use for a long time.
•
Do not bend the power cable excessively or place a heavy
object on top of it.
•
Do not extend the length of the power cable or alter it.
•
Do not use several devices on a multi-socket extension outlet.
•
The appliance shall be disconnected from its power source
during service and when replacing parts.
•
Take care to ensure that power cable could not be pulled out or
damaged during operation. There is risk of re or electric shock.










