Owner's Manual

11
HOW TO USE
ENGLISH
HOW TO USE
Air purification operation
It purifies the indoor air with clean and fresh air.
1. Start the air purifier by pressing the button.
2. Adjust the fan speed by pressing the Fan Speed button.
• Whenever fan speed button is pressed, the fan speed sequentially repeat as
AUTO → LOW → MID → HIGH → TURBO.
• When first turned on, it runs AUTO mode.
AUTO mode controls air volume depending on the air quality.
• Clean air indicator lamp displays white only to the lower side during the sensor stabilizing
time (2 minute) after starting operation.
(After stabilization, it indicates the air quality of top and lower side.)
Colors according to the cleanness
(Contaminated) Red → Orange → Yellow → Green (Clean)
Ionizer operation
It emits anion to remove various bacteria
1. Start the air purifier by pressing the button.
2. Press the Ionizer button.
• It removes hazardous substances such as bacteria, virus and others in the air.
• Every time you press the button, it changes in the order of Ionizer → reset function →
Ionizer.
Auto Low Mid High Turbo
① Ion Cluster
generation by
the polar link-
age of water
particle in the
air
② Sterilization
ion encircles
various haz-
ardous sub-
stances.
③ Generation of
OH(hydroxyl)
that is weak to
different
chemical reac-
tions
④ Reaction be-
tween hy-
droxyl (OH)
and hazardous
substances
⑤ Clean air re-
moved haz-
ardous
substances