Video Cassette with Line Player Recording OWNER'S MANUAL MODEL : AL152F PAL NTSC Before connecting, operating, please read this instruction booklet or adjusting this product, carefully and completely.
Position your VCP so that no sunlight falls directly onto it. F e a t u r e s Precautions, Contes& Do not 2 Controls & Sockets 3 TV 4 moisture, dust Tuning or heat. electrical storms it is advisable to damage plug to prevent Your VCP should not be service in to repaired by personnel. 5 Remote Control Functions 6 On Screen 7 Playing anyone except Never remove the back cover of your VCP as this can expose you to very high voltage and other hazards.
Each button your VCP has the on corresponding button control. (see page 6.) as its Power (On/Off) Stop (see & same on function the remote Tape Eject OPR page 9.) Cassette Automatic Tracking (see page 8.) Audio/Video IN/OUT (AC 100-240V, 50 Hz) Play Remote Record Control Sensor Function Indicators Mains Lead Rewind Compartment Fast Forward System Selector (see page Channel Selector (see page 7.) RF.OUT 5.) (connect to your TV using this socket) YourVCP'sntl RF.
The ToaTV Conecting on this page is the most common form of connection. However please check with your manufacturer's instruction books for specific information. Make sure all connections are made with both your VCP and additional appliance unplugged from the mains to avoid damaging your equipment. Connecting a guidance given VCP using Audio/Video cable is one of the best ways to achieve optimum sound and picture quality from video-tape playback.
Your TV receives signals You have to select from the video a player (VCP) channel number like another TV station. your TV and tune it in so that you may watch video tapes. TV set equipped with AUDIO and VIDEO sockets this adjustment will not on If you connect a monitor or a be necessary, simply select the AV mode 1 on your TV. Make 2 that you have installed your described earlier in sure Insert 3 a video pre-recorded correctly tape into your VCP and VCP press PLAY. as this book.
Your video player (VCP) is designed that almost all of its features so CONTROL HANDSET. Some features RemotCnrl Locatin&Fu must also be on or on to on play REC Rewinds the tape. Reverse a is FF high speed picture play. REW FF STOP LP/EP DISPLAY P/STILL To stop the tape. still picture. MENU screen. a TRK type arrow. Put the two batteries into MENU SELECT display the compartment making sure the and are correctly positioned.
On Screen Display gives you information about the tape counter and operational mode of your VCP. Some functions of this video player can be set and altered on the TV screen using the remote control with On Screen Display SYSTEM MENU OSD Press MENU to main display the menu. Press to select the or desired menu. Then you set the desired mode by pressing OK repeatedly. Press MENU to the Display OnScren . FUNCTION OSD Select the colour system used for playback and recording.
This VCP is How to designed to play back and record cassettes systems. You will only be able Getting When playbcktpe better eject using PAL, MESECAM, and NTSC video cassettes when your VCP is (3.58 or 4.43) colour plugged into the mains. picture playback started, the automatic tracking function works to get the best possible picture automatically. "AUTO TRACKING" will appear on the TV screen while it is doing this.
Video Head Whenever Cleaning ejected from your VCP the video head is automatically cleaning should not be necessary. However dirt accumulating on the head after a long period of time can cause the playback picture to become blurred broken up. High quality video cassette tapes will not normally deposit dirt onto the video head, but old or damaged tapes might. a video cassette is inserted into cleaned. This should 4 Press P/STILL to still a picture.
Other PlaybckFeturs 1 2 Repeat playback If you want to play back tape repeatedly, set 3 Press a REPEAT to ON. to select or tape is reached, VCP automatically rewinds REPEAT. REPEAT ON Press MENU. Press MENU to from TV tape beginning and repeats playback continuously. OFF. or DISPLAY MENU TRK DISPLAY TRK OK SELECT REPEAT F.OSD SELECT: OFF ON , OK END:MENU or rewind. PLAY REW MENU SYSTEM AUTO SYSTEM AUTO REPEAT ON REPEAT OFF F.OSD ON F.
Your VCP is vehicle designed or a for in-home 12V DC power or portable use. You can power it from the DC Input Socket Plug DC power cord TV set VIDEO AERIAL IN OT socket in your Your VCP and its DC power cord use in vehicles that have 12-volt, into either the 12-volt DC outlet AUDIO cigarette lighter source. electrical designed for negative ground are systems. (This is standard for most or cigarette lighter socket.
Your VCP allows you to make How to record 1 recordings connecting to TV a 2 Connect your VCP to as shown below. a TV Press POWER to turn equipped with AUDIO and VIDEO sockets. 3 on your VCP. Insert 4 a video cassette with the record protection tab Set the desired recording speed by pressing LP/EP. into your VCP. Your external aerial must be in your TV.
5 7 6 Press REC to start Press P/STILL to avoid unwanted recording. recording scenes. During recording of TV programme you do not change the TV channel number on your TV. indicator flashes in window. REC the Press P/STILL again recording. Tapes be can paused STOP to P LP/EP for up to minutes; PAUSE will be displayed when a tape is paused. After 5 minutes your VCP will stop recording to prevent damaging the tape or your VCP.
Make T a p e s Dub ing all connections sure damaging your 1 are made with both your VCP's and Television 2 Connect your VCP to another VCP as shown Press POWER to turn on Insert a blank video your VCP. tape with the record Insert protection tab into (recording) VCP. a source Aerial pre-recorded Press STOP to recording. your tape into another (playing) VCP.
Check the following No picture ? Is the mains ? Is the TV switched ? ? & no before for service. calling Power ..................................AC 100-240V, 50Hz +3 DC 12 -0 V, 1.2A sound plug plugged Have you tuned in watch video tapes on a in and switched on ? ? Power consumption.............Approx. 13 Watts .........................Tape Width 12.7 mm (0.5 inch) Dimensions (W x H x D) .....360 x 94 x 270 mm Weight .................................Approx. 3.4 Kg.
P/N: 3834RP0008Y
