Owner's Manual

18
MAINTENANCE
Cleaning the Dustbin
1
Remove the battery from the unit before cleaning
the dustbin.
2
Please empty the dustbin next to a wastebasket
or where dust and foreign objects can be emptied
easily.
3
Press the dustbin button downward to open it.
•
Empty the bin.
•
Be careful as dust/foreign matter may spill out
when you open the dustbin.
Dustbin Button
4
Insert the crevice tool into the large dust
separation device (Cyclonic Mesh Filter) and turn it
counterclockwise to remove it. Use the suction end
of the crevice tool to do this with ease.
5
Wash the large dust separation device (Cyclonic
Mesh Filter) with running water.
•
Be sure to dry the device completely before
reinserting it.
Large dust
separation
device
(Cyclonic
Mesh
Filter)
6
Remove the large dust separation device (Cyclonic
Mesh Filter) and use the combination tool to clean
out the dust inside the dustbin.
Combination
Tool
Warning
•
Never wash the product's body with water. Water may
reach the motor and cause electric shock or fire.
•
Do not apply force or any impact to the dust bin parts
or the large dust separation device (Cyclonic Mesh
Filter) as it may damage them.
•
Use the product only after cleaning the large
dust separation device (Cyclonic Mesh Filter) and
reassembling it on the product. Failure to do so will
damage the product.
Cleaning the Filters
The Pre-filter and exhaust filter need to be cleaned at
least once a month to maintain the cleaning performance
of the product. Clean it frequently in dusty environments
because the cleaning cycle depends on the operating
environment and the operating time.
1
Turn the exhaust filter counterclockwise to remove
it and take out the pre-filter.
Exhaust filter
Pre-Filter
(Yellow/
Green cloth
type)
2
With the unit upside down, use the combination
tool to clear dust from the motor part once the
Dust separator filter has been removed.
Combination
Tool
1 MFL69883607_en_180405.indd 18 2018-04-05 오후 1:54:21