USER GUIDE LG Digital Signage (MONITOR SIGNAGE) L14 Please read this manual carefully before operating your set and retain it for future reference. www.lg.
TABLE OF CONTENTS ENGLISH ENG 3 USING THE MONITOR 3 Using the Input List 3 Adjusting Aspect Ratio 5 ENTERTAINMENT 5 - Connecting to a Wired Network 6 - Network Status 7 Using the My Media 7 - Connecting USB Storage Devices 9 - Browsing Files 10 - Viewing Movies 13 - Viewing Photos 15 - Viewing the Contents List 16 - DivX® VOD Guide 17 CUSTOMIZING SETTINGS 17 Accessing Main Menus 18 - PICTURE Settings 21 - TIME Settings 22 - OPTION Settings 24 - NETWORK Settings 25
USING THE MONITOR ENG ENGLISH Using the Input List 1 Press INPUT to access the input source list. 2 Press the navigation buttons to scroll to one of the input sources and press OK. AV : Watch video from a VCR or other external devices. yy Component : Watch the content from a DVD or other external devices, or through a digital set-top box. yy RGB : View a PC display on the screen. yy HDMI : Watch contents from a PC, DVD of digital set-top box other high definition devices.
ENGLISH ENG yy16:9 T his selection will allow you to adjust the picture horizontally, in linear proportion, to fill the entire screen (useful for viewing 4:3 formatted DVDs). Just Scan This Selection will allow you view the picture of best quality without loss of original picture in yy high resolution image. Note: If there is noise in original Picture, You can see the noise at the edge. Set By Program Depending on the input signal, screen aspect ratio changes to 4:3 or 16:9.
ENTERTAINMENT Connect the display to a local area network (LAN) via the LAN port as shown on the following illustration and set up the network settings. Only supports wired network connection. After making a physical connection, a small number of networks may require the display network settings to be adjusted. For most networks, the display will connect to automatically without any adjustments. For detail information, contact your internet provider or router manual.
NOTE ENGLISH ENG yy If you want to access the Internet directly on your display, the Internet connection should always be on. yy If you cannot access the Internet, check the network conditions from a PC on your network. yy When you use Network Setting, check the LAN cable or check if DHCP in the router is turned on. yy If you do not complete the network settings, the network may not work properly. yy A DSL modem is required to use DSL service and a cable modem is required to use cable modem service.
Using the My Media Connect USB storage devices such as a USB flash memory, external hard drive to the display and use multimedia features. Connect a USB flash memory or USB memory card reader to the Display as shown on the following illustration. The My media screen appears. yy Only a USB storage device is recognizable. yy If the USB storage device is connected through a USB hub, the device is not recognizable. yy A USB storage device using an automatic recognition programme may not be recognized.
yy If the USB HDD does not have an external power ENGLISH ENG source, the USB device may not be detected. So be sure to connect the external power source. - Please use a power adaptor for an external power source. We do not guarantee an USB cable for an external power source. yy If your USB memory device has multiple partitions, or if you use a USB multi-card reader, you can use up to 4 partitions or USB memory devices.
Browsing Files ENG ENGLISH Browse files saved in a USB storage device. 1 Press SETTINGS to access the main menu. 2 Press the search button to scroll to MY MEDIA and press OK. 3 Press the Search button to go to the Movie List, Photo List or Content List that you want, and press OK. Supported file format Type Supported file format Movie Video Codec Media Container Profile MPEG1 / MPEG2 DAT, MPG, MPEG, DVD, TS, TP 1080p @ 30 fps MPEG4 (DivX 3.11, DivX 4, DivX 5, DivX 6, Xvid 1.01, Xvid 1.
Viewing Movies ENGLISH ENG Plays movie files saved in the USB storage device. 1 Press SETTINGS to access the main menu. 2 Press the navigation button to scroll to MY MEDIA and press OK. 3 Press the navigation button to scroll to Movie List and press OK. 4 Press the navigation buttons to scroll to a folder you want and press OK. 5 Press the navigation buttons to scroll to a file you want and press OK. yy Go to root folder : Returns to the home screen of My Media.
Tips for using playing video files Video options 1 Press SETTINGS to access the Pop-Up menus. 2 Press the navigation buttons to scroll to Set Video Play or Set Video. and press OK. NOTE yy The option values changed in Movie List do not affect Photo List. Therefore, they are not affected by option values changed in Photo List. yy The option values changed in Photo List do affect each other. yy When replaying the video file after stopping, you can play from where it stopped previously.
Select Set Video Play. to access the following menus: ENGLISH ENG Menu Picture Size Subtitle Language Language Code Page Sync Position Size Repeat Description Selects your desired picture format during movie play. Turn on/off the subtitle. Activated for SMI subtitle and can select the language within the subtitle. Can select the font for subtitle. When set to default, same font as general menu will be used. Adjusts the time synchronisation of the subtitle from -10 secs to +10 secs by steps of 0.
Viewing Photos 1 Press SETTINGS to access the main menu. 2 Press the navigation button to scroll to MY MEDIA and press OK. 3 Press the navigation button to scroll to Photo List and press OK. 4 Press the navigation buttons to scroll to a folder you want and press OK. 5 Press the navigation buttons to scroll to a file you want and press OK. yy Go to root folder : Returns to the home screen of My Media. yy Go to upper folder : Returns to the previous screen. yy Exit : Exits My Media.
Photo options ENGLISH ENG 1 Press SETTINGS to show the Option menus. 2 Press the navigation buttons to scroll to Set Photo View, Set Video. and press OK. NOTE yy The option values changed in Movie List do not affect Photo List. Therefore, they are not affected by option values changed in Photo List. yy The option values changed in Photo List do affect each other. Select Setting Photo View. to access the following menus: Menu Slide Speed Description Select a slideshow speed.
Viewing the Contents List 2 Press the navigation button to scroll to MY MEDIA and press OK. 3 Press the navigation button to scroll to Contents List and press OK. 4 Press the navigation buttons to scroll to a folder you want and press OK. 5 Press the navigation buttons to scroll to a file you want and press OK. yy Go to root folder : Returns to the home screen of My Media. yy Go to upper folder : Returns to the previous screen. yy Exit : Exits My Media.
DivX® VOD Guide ENGLISH ENG DivX® VOD Registration In order to play purchased or rented DivX® VOD contents, you should register your device with 10 digit DivX registration code from your device at www.divx.com/vod. 1 Press SETTINGS to access the main menus. 2 Press the navigation buttons to scroll to MY MEDIA and press OK. 3 Press the blue button. 4 Press the navigation buttons to scroll to DivX Reg. Code and press OK. 5 View the registration code of your display. 6 When you are finished, press EXIT.
CUSTOMIZING SETTINGS 1 Press SETTINGS to access the main menus. 2 Press the navigation buttons to scroll to one of the following menus and press OK. 3 Press the navigation buttons to scroll to the setting or option you want and press OK. 4 When you are finished, press EXIT. When you return to the previous menu, press BACK. yy PICTURE : Adjusts the image size, quality, or effect. yy TIME : Sets the time, date, or timer feature. yy OPTION : Sets the functions of OPTION.
PICTURE Settings ENGLISH ENG 1 Press SETTINGS to access the main menus. 2 Press the navigation buttons to scroll to PICTURE and press OK. 3 Press the navigation buttons to scroll to the setting or option you want and press OK. - To return to the previous level, press BACK. 4 When you are finished, press EXIT. When you return to the previous menu, press BACK.
Setting Description Customizes the PC display options in RGB mode. Option Resolution Selects a proper resolution. Auto Configure Sets to adjust the screen position, clock, and phase automatically. The displayed image may be unstable for a few seconds while the configuration is in progress. Position/Size/ Phase Adjusts the options when the picture is not clear, especially when characters are shaky, after the auto configuration. Reset Restores the options to the default setting.
Advanced Control - Picture Mode (Standard/ APS/ Sport/ Game) ENGLISH ENG Setting Description Dynamic Contrast Adjusts the contrast to the optimal level according to the brightness of the image. Dynamic Color Adjusts color for more natural-looking colors. Color Gamut Selects the range of colors that can be expressed. Skin Color Skin Color spectrum can be separately set to implement the skin color as defined by the user. Sky Color Sky color is set separately.
TIME Settings 2 Press the navigation buttons to scroll to TIME and press OK. 3 Press the navigation buttons to scroll to the setting or option you want and press OK. - To return to the previous level, press BACK. 4 When you are finished, press EXIT. When you return to the previous menu, press BACK. The available time settings are described in the following: Setting Description Clock Sets the time feature. On/Off Time Sets the time to turn on or off the monitor set. Auto Off(15Min.
OPTION Settings ENGLISH ENG 1 Press SETTINGS to access the main menus. 2 Press the navigation buttons to scroll to OPTION and press OK. 3 Press the navigation buttons to scroll to the setting or option you want and press OK. - To return to the previous level, press BACK. 4 When you are finished, press EXIT. When you return to the previous menu, press BACK. The available option settings are described in the following: Setting Description Language Selects a language for the display text.
Tile Mode Off 2X2 1X2 When the Tile Mode option is disabled When using 2 monitors ID 1 3X3 When using 4 monitors ID 2 ENG ENGLISH This monitor can be tiled with additional monitors to create a large tiled display.
NETWORK Settings ENGLISH ENG 1 Press SETTINGS to access the main menus. 2 Press the navigation buttons to scroll to NETWORK and press OK. 3 Press the navigation buttons to scroll to the setting or option you want and press OK. - To return to the previous level, press BACK. 4 When you are finished, press EXIT. When you return to the previous menu, press BACK. The available option settings are described in the following: Setting Description Network Setting Configure the network settings.
IR CODES ENG ENGLISH All models do not support the HDMI/USB function. yy Some key codes are not supported depending on the model.
PICTURE ID NOTE ENGLISH ENG Picture ID is used to change the settings of a specific display using a single IR receiver for multi-vision. The set receiving the IR signal communicates with another set via an RS-232C connection. Each set is identified by a Set ID. If you assign the Picture ID using the remote control, only displays with the same Picture ID and Set ID can be controlled remotely.
CONTROLLING THE MULTIPLE PRODUCT Connecting the cable Connect the RS-232C cable as shown in the picture. The RS-232C protocol is used for communication between the PC and product. You can turn the product on/ yy off, select an input source or adjust the OSD menu from your PC.
Command Reference List ENGLISH ENG COMMAND 1 DATA (Hexadecimal) 2 01 Power k a 00 to 01 02 Select input x b See [Select input] 03 Aspect ratio k c See [Aspect ratio] 04 Energy saving j q See [Energy saving] 05 Picture mode d x See [Picture mode] 06 Contrast k g 00 to 64 07 Brightness k h 00 to 64 08 Sharpness k k 00 to 32 09 Color k i 00 to 64 10 Tint k j 00 to 64 11 Color temperature x u 00 to 64 12 H position f q 00 to 64 13 V position
COMMAND 2 DATA (Hexadecimal) 42 Power On Delay f h 00 to 64 43 Tile Mode d d 00 to 01 44 Tile Mode Check d z FF 45 Tile ID d i Refer to ‘Tile ID'. 46 Tile H Position d e 00 to 32 47 Tile V Position d f 00 to 32 48 Tile H Size d g 00 to 32 49 Tile V Size d h 00 to 32 50 Natural Mode (In Tile mode) d j 00 to 01 NOTE During USB operations such as Dvix or EMF, all commands except Power (k a) and Key (m c) are not executed yy and treated as NG.
Transmission / Receiving Protocol ENGLISH ENG Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] * [Command1]: First command to control the set. * [Command2]: Second command to control the set. * [Set ID]: U sed for selecting a set you want to control. A Set ID can be assigned to each set from 1 to 255 (from 01H to FFH), or from 1 to 1,000 (from 001H to 3e8H) in certain models, under OPTION in the OSD menu.
01. Power (Command: k a) Controls the power on/off of the set. Data 00: Off 01: On Acknowledgement [a][ ][Set ID][ ][OK/NG][Data][x] * Only when the monitor is fully powered on, the acknowledgement signal is returned properly. * There may be a delay between the transmission and acknowledgement signals.
07. Brightness (Command: k h) Adjusts the screen brightness. ENGLISH ENG Transmission [k][h][ ][Set ID][ ][Data][Cr] Data 00 to 64: Brightness 0 to 100 Acknowledgement [h][ ][Set ID][ ][OK/NG][Data][x] 08. Sharpness (Command: k k) Adjusts the screen sharpness. Transmission [k][k][ ][Set ID][ ][Data][Cr] Data 00 to 32: Sharpness 0 to 50 Acknowledgement [k][ ][Set ID][ ][OK/NG][Data][x] 09. Color (Command: k i) Adjusts the screen color.
Transmission [f ][r][ ][Set ID][ ][Data][Cr] 16. Balance (Command: k t) Adjusts the sound balance. Transmission [k][t][ ][Set ID][ ][Data][Cr] Data 00 to 64: Left 50 to right 50 Acknowledgement [t][ ][Set ID][ ][OK/NG][Data][x] ** This may not be supported on some models. Data 00 to 64: Min -50 (down) to max 50 (up) Acknowledgement [r][ ][Set ID][ ][OK/NG][Data][x] 14. H size (Command: f s) Adjusts the horizontal size of the screen. This function is only available when the Tile Mode is set to Off.
19. Volume (Command: k f) Adjusts the playback volume. ENGLISH ENG Transmission [k][f ][ ][Set ID][ ][Data][Cr] Data 00 to 64: Volume 0 to 100 Acknowledgement [f ][ ][Set ID][ ][OK/NG][Data][x] ** This may not be supported on some models. 20. Clock 1 (year/month/day) (Command: f a) Adjusts the Clock 1 (year/month/day) value.
25. On timer (repeat mode/time) (Command: f d) Configures the on time (repeat mode/time) settings. Transmission [f ][e][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr] Transmission [f ][d][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr] Data1 1. F1 to F7 (reading data) F1: Read the 1st off timer data F2: Read the 2nd off timer data F3: Read the 3rd off timer data F4: Read the 4th off timer data F5: Read the 5th off timer data F6: Read the 6th off timer data F7: Read the 7th off timer data 2.
ENGLISH ENG 26. On timer input (Command: f u) Adds a new schedule entry by selecting input for the current on timer setting. Transmission [f ][u][ ][Set ID][ ][Data1][Cr] [f ][u][ ][Set ID][ ][Data1][Data2][Cr] Data (adding schedule) 60: RGB 90: HDMI (HDMI1) Data1 1.
Transmission [f ][k][ ][Set ID][ ][Data][Cr] Data 00: Picture reset 01: Screen reset 02: Initial settings (factory reset) 34. Time elapsed (Command: d l) Checks the elapsed time. Transmission [d][l][ ][Set ID][ ][Data][Cr] Data FF: Read status Acknowledgement [l][ ][Set ID][ ][OK/NG][Data][x] * The data received is shown as a hexadecimal value. Acknowledgement [k][ ][Set ID][ ][OK/NG][Data][x] 32. Current temperature (Command: d n) Checks the inside temperature value.
37. White balance red gain (Command: j m) Adjusts the white balance red gain value. ENGLISH ENG Transmission [j][m][ ][Set ID][ ][Data][Cr] Data 00 to FE: Red gain 0 to 254 Acknowledgement [m][ ][Set ID][ ][OK/NG][Data][x] 40. Backlight (Command: m g) Adjusts the back light brightness. Transmission [m][g][ ][Set ID][ ][Data][Cr] Data 00 to 64: Back light brightness 0 to 100 Acknowledgement [g][][set ID][][OK/NG][Data][x] ** This may not be supported on some models. 38.
Transmission [d][d][ ][Set ID][ ][Data][Cr] Data 00 to FF: 1st byte - Tile Row 2nd byte - Tile Column *00, 01, 10, 11 means Tile Mode Off ** It may not be supported depending on the model. Acknowledgement [d][ ][Set ID][ ][OK/NG][Data][x] 44. Tile Mode Check (Command: d z) To check Tile Mode status. Transmission [d][z][ ][Set ID][ ][Data][Cr] Data FF: Check Tile Mode status. ** It may not be supported depending on the model.
ENGLISH ENG 49. Tile V Size (Command: d h) To adjust the Tile Vertical size. *Set Tile V Position to 0x00 before setting Tile V Size. * This function is available only when the Natural option of the Tile Mode is set to Off while the Tile Mode set to On. Transmission [d][h][ ][Set ID][ ][Data][Cr] Data 00 to 32: 0 to 50 ** It may not be supported depending on the model. Acknowledgement [h][ ][Set ID][ ][OK/NG][Data][x] 50.
