Owner's Manual

1. Avoid
placing
the unit near heat
sources,
direct
sunlight
or moisture.
2. There must be
proper
air circulation around
your refrigerator
to
keep
it
operating efficiently.
3. To avoid
vibration,
the unit must be level.
If
required, adjust
the
leveling
screws to
compensate
for unevenness of the floor.
The front should be
slightly higher
than the
rear to aid in door
closing.
Leveling
screws can be turned
easily by
tipping
the cabinet
slightly.
Turn the
leveling
screws
clockwise( )
to raise
the
unit,
counterclockwise( )
to lower it.
4. Install this
appliance
between 10 °C and 43 °C.
If the
temperature
around the
appliance
is too
low or
high, cooling ability may
lessen.
NEXT
1. Clean
your refrigerator thoroughly
and
wipe
off
all dust accumulated
during shipping.
2. Install accessories such as ice cube
bin,
drawers, shelves, etc.,
in their
proper places.
They
are
packed together
to
prevent possible
damage during shipment.
3. Connect the
power supply
cord
(or plug)
to the
outlet. Don't double
up
with other
appliances
on the same outlet. The best solution is to
have the
refrigerator
on a
single-outlet
circuit.
Moreover,
the
appliance
is so
positioned
that
the
plug
is accessible.
4. Let
your refrigerator
run for 2 or 3 hours
before
putting
food in it.
Check the flow of cold air in the freezer
compartment
to ensure
proper cooling.
Your
refrigerator
is now
ready
for use.
3
INSTALLATION
THIS REFRIGERATOR IS MANUFACTURED WITH GREAT CARE AND UTILIZES THE LATEST
TECHNOLOGY.
WE ARE CONFIDENT THAT YOU WILL BE FULLY SATISFIED WITH ITS PERFORMANCE AND
RELIABILITY.
BEFORE YOU START YOUR
REFRIGERATOR,
PLEASE READ THIS BOOKLET CAREFULLY.
IT PROVIDES EXACT INSTRUCTIONS FOR
INSTALLATION,
OPERATION
AND
MAINTENANCE,
AND ALSO SUPPLIES SOME USEFUL HINTS.
Clearance
Clearance
3828JD8228R(OM)¿
(2~14)
01.1.6 2:48 AM ˘`3