LCD TV PLASMA TV MODELS: 32LC2D 32LC2DU 37LC2D 42LC2D MODELS: 42PC3D 42PC3DV 50PC3D 60PC1D OWNER'S MANUAL Internet Home ENERGYSTAR is guidelines a issued set of by Page : http://www.lge.com http://www.lg.ca power-saving the U.S. Environmental Protection Please read this manual Agency(EPA). an ENERGY STAR Partner LGE U. S. A.,Inc. has determined that this product meets - Applied operating your set.
Warning W Warning CAUTION WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within "dangerous voltage" the presence of uninsulated cient magnitude to constitute a an equilateral triangle, is intended to alert the user product's enclosure that may be of suffi- to within the risk of electric shock to persons.
Safety Instructions Instructions Safety WARNING : To reduce the risk of fire Apparatus shall not be or electric exposed to shock, do dripping or not expose this splashing and apparatus no objects to rain or filled with moisture. liquids, such as vases, shall be placed on the apparatus. IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 8. Do not install near heat Owne r ' s Manu al 2. Keep these instructions. 3.
Safety Instructions 12. Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart / apparatus combination to avoid injury from tip-over. 14. Refer all servicing to qualified service personnel.
Contents Contents Contents Introducin 2 Warning 3~4 Safety 7 Accessories 8~11 Controls Connection External Equipment Connections Attaching the TV to a wall Desktop Pedestal Installation 16~17 Basic Connection 18 Antenna 19~20 VCR 20 External AV Source 21~22 DVD Setup Menu Options Video Menu Options or Cable Connection Setup Setup 26~28 Setup HDSTB Setup AV Out Setup Digital Audio Output PC Setup 29 Turning on 29 Volume Adjustment 29 Channel Selection 29 On Screen Men
Contents Operation Refrnce 6 44 Manual Clock 44 Auto Clock 45 On/Off Setup Setup Timer Setup Timer 45 Sleep 46 Auto Off 47 Aspect Ratio Control Caption/Text Caption Option Low Power (42PC3D/3DV, 50PC3D, 60PC1D Only) ISM (Image Sticking Minimization) Method (42PC3D/3DV, 50PC3D, Only) 48 49 49 50 51~52 Parental Lock 53~58 External Control Device 59~60 IR Codes 61 Programming the Remote 62~63 Programming Codes 64~65 Troubleshooting 65 Maintenance 66~67 Product Setup Setup
Introduction Introduction Accessories Ensure that the following accessories dealer from where you purchased the with ferrite cores to maintain standard included with your TV. If any accessory is missing, please contact the interface cables(D-sub 15 pin cable) are product. User must use shielded signal compliance for the product.
Introduction Controls Controls - - (Model Name: 42PC3D/3DV, 50PC3D, 60PC1D) This is of front This somewhat different from your TV. a simplified representation picture shown below may be panel. 42PC3D/3DV, 50PC3D CHANNEL CH (D, E) Buttons VOLUME OL (F,G) Buttons ENTER ENTER Button MENU MENU Button INPUT INPUT Button Remote Control Sensor Power/Standby (Power) Indicator ? illuminates red in ? illuminates green when the set is switched standby Button mode. on.
Introduction Connection Connection Options Options (Model Name: 42PC3D/3DV, 50PC3D, - This picture 60PC1D) shown below may be somewhat different from your TV. S-VIDEO AVIN2 Input Provides better picture than the video input. AUDIO R Input Connections tening /MONO quality are available for lis- to stereo sound from an external device. VIDEO Input Connects the video video device.
Introduction Controls Controls - - (Model Name: 32/37/42LC2D, 32LC2DU) This is of front This somewhat different from your TV. a simplified representation picture shown below may be panel. CHANNEL CH (D, E) Buttons VOLUME VOL (F,G) Buttons ENTER Button ENTER MENU MENU Button INPUT INPUT Button R (Power) Button Remote Control Sensor Power/Standby ? Indicator illuminates red in standby mode. ? Swivel Swivel Stand Stand illuminates green when the set is switched on.
Introduction Connection Connection - This picture Options Options (Model Name: 32/37/42LC2D, 32LC2DU) shown below may be somewhat different from your TV. S-VIDEO Input Provides better video input. VIDEO picture quality Input Connects the video device. AUDIO signal from a video Input Connections AC IN than the are available for listening to an external device.
Introduction Remote Control Control Key Functions POWER Turns your TV or off, depending on any other mode. programmed equipment on or TV INPUT In INPUT TV INPUT POWER DVD TV VC R MODE sources, screen or RGB-PC, HDMI1/DVI, and HDMI2 returns to the last TV channel. INPUT External CABLE AUD IO AV1-2, Component 1-2, input S TB input modes rotate in regular Component 1-2, RGB-PC, HDMI1/DVI sequence: TV, AV1-2, HDMI2.
Introduction VCR/DVD/DVHS/Camcorder BUTTONS INPUT TV INPUT DVD TV CABLE O video cassette recorders some or DVD button is not available for DVD players player). VC R MODE AUD I Control ("RECORD" POWER S TB VOLUME UP/DOWN Increases/decreases the sound level. CHANNEL UP/DOWN Selects available channels found with EZ T H BRIG - MENU BRI G HT + MUTE G scan and Manual scan. p.29 Switches the sound on or off. FAV ENTER Use to scroll the Favorite channels.
Introduction Installing Remote control effective range Batteries 32/37/42LC2D, 42PC3D/3DV, 50PC3D 32LC2DU TVINPUT 60PC1D NPUT POWER TVINPUT TVINPUT NPUT the battery compartment polarity (+with +,-with ) TV matching VCR TV STB AUDO MENU DVD VCR DVD MODE TV MODE CABLE CABLE STB AUDIO BRIGHT + BRIGHT MENU B RIGHT+ RIGHT B MENU VCR STB BRIG HT+ ENTER ENTER cor- EXIT TIMER FO RAT ON E XIT TIM ER RATO ENTER INFO EXI TTIMER FO RATION - . Use Install two 1.
Installation Installation DESKTOP PEDESTAL INSTALLATION For proper ventilation, allow a clearance of 4inches on each side from the wall. 42PC3D/3DV, 50PC3D, 60PC1D 4 inches 4 inches 4 inches 32/37/42LC2D, 32LC2DU 4 inches 4 inches 4 inches 4 inches 4 inches CAUTION G Ensure This adequate picture ventilation by following the clearance recommendations. shown below may be somewhat different from your TV.
Basic Connection Connection (For (For 32/37/42LC2D, 32LC2DU) Connect the cables 1 After connecting as necessary. the cables neat- ly, arrange the cables to the Cable Holder. To connect ment, see an additional the External equipequip- ment Connections section. Cable holder 32LC2D/U CABLE MANAGEMENT Reinstall the CABLE MANAGE- 2 MENT as 37/42LC2D shown. 32LC2D/U Bundle the cables 3 plied using 37/42LC2D the sup- twister holder.
Basic Connection Connection How to 1 use stand Place the set with the screen (For 42PC3D/3DV) facing down on 2 Pull the stand out shown. as two locks unfolding the stand, please insert and tighten the screws (provided as parts of the product) in the holes (B) on the bottom of the outward. stand. a cushion Before or soft cloth as shown. unfolding the stand, please make sure (A) on the bottom of the stand push After (A) (B) * 3 When connecting cables disengage the lock (C).
Installation External NOTE: Connections Equipment Connections All cables shown are not included with the TV Antenna Or Cable Connection Analog - - and Antenna For Digital TV signals provided Cable Service without or a optimum picture quality, adjust on antenna Cable Box Connection. antenna direction if needed. Multi-family Dwellings/Apartments (Connect to wall antenna socket) Wall Antenna Socket ANTENNA CABLE RF Coaxial Wire IN (75 ohm) VHF Antenna Turn clockwise to tighten.
Installation VCR - - To avoid picture Typically a noise frozen still from of the screen may remain visible When connecting leave (interference), picture with an the on an adequate VCR. If the 4:3 a Setup distance between the VCR and TV. picture format is used; the fixed images on the sides screen. antenna 1 2 VCR Connect the RF antenna out socket of the VCR to the Antenna socket the set.
Installation When connecting with an S-Video cable VCR 1 ANT IN S-V DEO OUT O SW PUT CH 34 L)VEO IN 2 2 1 3 ADO output of the VCR set. The input on the improved; compared cable) input. ANT OUT (AUDI Connect the S-VIDEO VIDEO Connect the audio AUDIO input jacks Insert video on COMPNE 4 a the VCR. PT CAL DGTALAUDO - MONO S VDO on outputs of the VCR on to the the set.
Installation DVD When connecting with Setup S-Video cable a DVD (R) S-VIDEO AUDIO 1 (L) 2 AUD DEO O COMPN VOU P DG CAL ALAUDO VIN1 MONO SVDEO V DEO AUD O OUT 1 Connect the S-VIDEO 2 Connect the audio 3 Turn 4 Select AV1 input source with using the INPUT button If connected to AV IN 2, select AV 2 input source. on the DVD output of the DVD outputs of the DVD player, insert a to the S-VIDEO to the AUDIO input on input jacks the set. on the set. DVD.
Installation When connecting with component cable a DVD B R (R) AUDIO 1 (L) 2 AUD O 1 Connect the video outputs (Y, PB, PR) of the DVD 2 Connect the audio outputs of the DVD 3 Turn 4 Select the DVD player, Component 1 insert input Refer to the DVD ? player's Component ports Video on on the TV output ports DVD player to the COMPONENT IN AUDIO with using the INPUT button on 2, select Component 2 input manual for Component Input ports get better picture quality, t
Installation HDSTB - This TV can receive Setup Digital Over-the-air/Cable signals without an external digital set-top box. However, if signals from a digital set-top box or other digital external device, refer to the figure you do receive Digital as shown below.
Installation When connecting with a HDMI to DVI cable SERV CE RGB IN PC) REMO AUDON RGB HDM E CO DV ROL N V S-232C N CO ROL & SERVICE 2 1 DVI-DTV OUTPUT (R) AUDIO Digital Set-top 1 Connect the DVI 2 Connect the audio 3 Turn 4 Select HDMI1/DVI ? ? ? on If the the outputs of the set-top box digital set-top input digital set-top box.
Installation AV Out - The TV has special signal output capability a V AUD DEO Setup which allows you to hook up COMPNET 1 V OUT 2 VN1 ONO S-V DEO DO VEO OU Connect the second TV OUT CAL ALAUDO second TV or monitor. O P DG a or monitor to the TV's AV jacks. See the Operating Manual of the second TV monitor for further details regarding or that device's input settings. 1/2 ? 1-2, RGB-PC, HDMI1/DVI, HDMI2, DTV input sources cannot be used Component for Monitor out.
Installation PC - This TV When and provides Plug connecting with a Setup Play capability, meaning D-sub 15 that the PC adjusts automatically Connect the RGB (PC) jack A on to the RGB IN DVI RS 232C CONTROL & Connect the PC audio IN(RGB/DVI) jack N on outputs to the AUDIO the set. SERV CE 2 3 Turn 4 Select the PC and the set. on 1 RGB-PC INPUT button AUDIO connecting output of the PC the set. DIOIN 2 When settings.
Installation 1. Depending not work if on the graphics card, DOS mode may HDMI to DVI Cable is in a Check the 5. 2. When Source Devices connected with HDMI/DVI PC Resolution Input, output WXGA), Position Position of TV SET and contact graphics 3. an PC When Source Devices connected with HDMI/DVI Manual of HDMI/DVI Source Devices or ed Cable OSD or 6. contact your service center. 4. In case HDMI/DVI Source Devices is not connect- your TV.
Installation Screen - - - * for PC mode Setup When RGB connect to PC input and select the RGB-PC, this function is used. input and select HDMI/DVI input, this function is used. or HDMI/DVI to PC input and checking the screen quality.
Operation Operation Operation Basic operation operation Turning 1. First, In connect power cord standby correctly. This TV is the TV At this moment, the TV switches to the TV . viewing source by using TV INPUT, INPUT button on the remote control. programmed to remember which power state it was last set to, even if the using press the POWER, TV or ~ , the TV, press the POWER button Volume on standby mode. Adjustment 1.
Operation On On Screen Menus Selection and How to 1. Press the MENU button and then D / E 2. Press the G button and then use adjust the OSD button to select each D/E / F / G button to Adjustment screen menu. display the available menus.
Operation Menu Setup Setup Options Options EZ Scan (Channel Search) EZ Scan EZ Scan Manual Scan Manual Scan Channel Edit Channel Edit DTV Signal DTV Source Input G Selection ( G or) leads you to the EZ scan screen. Processing EZ scan... Signal Input TV Ch.20 Source channel(s) found 0 Input Label Input Label Set ID Set ID Press current to stop the scan and start DIGITAL ANTENNA channel scan.
Operation Channel Edit EZ Scan EZ Scan Manual Scan Manual Scan Channel Edit Channel Edit DTV Signal Input DTV Source Selection ( G ) leads or you to the channel edit screen. Source Input Input Label Input Label Set ID Set ID * G Signal Custom List D E There - are two different ways in order to add or delete scanned channels. One is "Custom List" and the other is "Favorite List" in the channel list.
Operation Setup Setup Menu Options Options continued continued DTV Signal Strength EZ Scan EZ Scan Manual Scan Manual Scan Channel Edit Channel Edit Input Label Set ID Set ID adjust your antenna or digital cable input. The higher the signal strength, the less likely you are to experience picture degrada- 1 Press the MENU button and then 2 Press the 3 View the being tion.
Operation Input Label EZ Scan EZ Scan Manual Scan Manual Scan Channel Edit AV1 Cable Box AV2 VCR Channel Edit DVD Component1 DTV Signal Input - Sets a label to each DTV Source Signal Input Component2 Source Input Label Input Label Set ID Set ID input source lets you skip the input source which is not in use when you 1 Press the MENU button and then 2 Press the G 3 Press the G use Set RGB-PC G Top Box PC HDMI1/DVI Game HDMI2 Satellite D/E button to select t
Operation V V ideo Menu Options Options Auto Picture Control Control - EZ Picture picture adjusts the TV for the best appearance. Select the preset value in the EZ Picture on - the program menu are quality 1 based factory and are You ? 2 directly adjust to select the picture appear- User 1 and User 2(your set- own can also the VIDEO use menu to adjust EZ Picture. not In the User 1, and User 2 modes user can repeatedly shown below: as tings).
Operation Manual Color Temperature Control EZ Picture EZ Picture Color Temperature Color Temperature XD XD Medium Advanced Advanced Warm Video Reset Video Reset User Cool Selection ( G G ) leads or to the detailed you setting screen. Red User 0 E Red 0 Green 0 Blue 0 Press - can also adjust the detailed set tings(Red, Green, Blue) by selecting MENU G to confirm. You the User 1 menu.
Operation XD - - - EZ Picture EZ Picture Color Temperature Color Temperature XD XD Advanced Advanced Video Reset Video Reset XD is LG Electronic's unique picture improving technology to display a real HD source through an advanced dig-ital signal processing algorithm. When selecting EZ Picture options (Daylight, Normal and Night time), XD is automatically change to Auto.
Operation Advanced-Cinema 3:2 Mode / Black Level EZ Picture EZ Picture Color Temperature Color Temperature XD XD Advanced Advanced Video Reset ? - Cinema 3:2 Mode Set up the TV for the best picture appearance for viewing movies. When you operate Cinema (3:2 PullDown Mode or Cinema Correction adjust 24 fps video fps video for display (This function is only available in Analog, AV1, AV2, Component 480i mode.
Operation Video Reset EZ Picture EZ Picture Color Temperature Color Temperature XD XD Advanced Advanced Video Reset Video Reset G Selection ( G the - Use to menu quickly reset all the Video options to their original fac- tory preset values. 1 2 3 Press the MENU button and then use ) resets to D/E button to select the VIDEO Press the G button and then Press the G button to reset the Video use or factory settings (default). menu. D/E button to select Video Reset.
Operation Audio Menu Options Options Audio Audio Language Audio Language EZ Sound EZ Sound Balance Balance TV Speaker Other languages may be available digital signal is provided by the - if a Language TV 1 English Spanish French Speaker Press the MENU button and then AUDIO G use D/E button to select the menu. broadcasting station.
Operation Auto Sound Sound Control Control - EZ Sound lets you enjoy the best sound without any special adjustment because the TV sets the appropriate on sound options 1 Press the EZ SOUND button repeatedly sound : based settings) the program content. Normal, Stadium, News, Music and Theater are preset for good sound are - setup quality at the factory adjustable.
Operation * Selecting Press the or the Front Surround G button and then SRS ( Sound Retrieval use F / G System) Front Surround 6 System) . TruSurround XT is Audio Balance function is disable and set to 0 When Off is ance as TruSurround XT SRS TruSurround XT Note: When SRS ( Sound Retrieval selected, button to select Off . selected, Audio Balance function is enable and reset the bal- previous.
Operation Balance - Adjust the sound in your preference and surrounded environment. Audio Language Audio Language EZ Sound EZ Sound Balance TV 1 2 Balance Speaker TV Press the MENU button and then select the AUDIO Press the use L 0 R Speaker D/E button to menu. G button and then use D/E button to select G button and then use F / G Balance. Balance 3 4 Press the L R appropriate adjustments.
Operation T ime Menu Options Options Manual Clock Setup Auto Clock Auto Clock Manual Clock Manual Clock Off Timer Off Timer On Timer On Timer Sleep Timer Sleep Auto Off - If current time reset the clock setting is manually. Year G ---- Date--/-- Time--:-- -- Timer Auto Off wrong, 1 2 Press the MENU button and then Press the use button and then G D/E button to select the TIME menu. D/E button to select Manual use Clock.
Operation On/Off Timer Setup Auto Clock Auto Clock Manual Clock Manual Clock Off Timer Off Timer On Timer On Timer Sleep Timer Sleep Auto Off Off G On Timer Time6:30AM Auto Off Ch. Vol - Timer function operates only if current time has been set. - Off-Timer function overrides OnTimer function if they are set both set to the time. same 1 2 The TV must be in Press the D/E button to select the TIME use button and then use button and then use G 2-0 17 menu.
Operation T ime Menu Options Options continued continued Auto Off Auto Clock Auto Clock Manual Clock Manual Clock Off Timer Off Timer TV will be Signal On Timer Sleep automatically turned off, in case of No for 10 minutes. On Timer Sleep Timer Timer Auto Off Auto Off G Off On -IftheTVisonandthereisno the input signal, automatically after TV turns off 10 minutes. 1 Press the MENU button and then 2 Press the G button and then use D/E button to select Auto Off.
Operation Menu Features Option Option Aspect Set Ratio Control Horizon by program Selects the proper picture proportion to match the source's The image. a (4:3 4:3) (16:9 screen size is, more enlarged at both sides, to create view. spectacular 16:9) Horizon Set Set By Program By Program Zoom 1 4:3 Choose Zoom 1 when you want to view the Choose 4:3 when you want to view a picture with an original out any alteration. aspect ratio.
Operation Menu Features continued continued Option Option Caption/Text * Analog Broadcasting System Captions Aspect Ratio Aspect Ratio Caption/Text Caption/Text Caption Option Caption Option CC2 Language Language CC3 ISM Method ISM Method Low Power Off G CC1 CC4 Text 1 Low Power Text 2 Text 3 Text 4 - - - Select caption mode for displaying captioning information if provided on a program. Analog caption displays information at any position on the screen.
Operation Caption Option Aspect Ratio Aspect Ratio Style Custom Caption/Text Caption/Text Size A Standard Caption Option Caption Option Font Font 0 Language G Text Color Language Text ISM Method ISM Method Bg Color Black Low Power Low Power Bg Opacity Solid Edge Type None Edge - White Solid Opacity Customize the DTV/CADTV captions that appear on your screen. 1 Press the MENU button and then OPTION menu.
Operation Option Option ISM Menu Features continued continued (Image Sticking Minimization) Method (42PC3D/3DV, 50PC3D, 60PC1D only) Aspect Ratio Aspect Ratio Caption/Text Caption/Text Caption Option Caption Option Language Language ISM Method ISM Method Low Power Low Power Normal G White Wash Orbiter Inversion - A frozen still picture from a PC/video game displayed on the screen for prolonged periods will result in ghost image ; even though image is changed.
Operation Lock Menu Parental Control Options Options be used to block can The Parental Control Function the viewing sources. and by function, the following categories (V-Chip) setting this must be done 1. Set ratings and categories Specify a password 2. and other is used to block program viewing based on the ratings sent by the broadcastis to allow all programs to be viewed. Viewing can be blocked by the type of program chosen to be blocked.
Operation Parental Lock Setup Lock System Lock System Set Password Set Password Block Channel Block Channel Movie TV TV Movie Rating - Rating-Children Rating-General TV Rating-General Input Block viewing 1 Press the MENU button and then menu. sources. ? ? - A password is required access to this System is turned Rating Rating-Children Set up blocking schemes to block specific channels, ratings, and external On TV Input Block menu to Off G gain if the Lock 2 on.
Reference External Control Control Device Setup Setup - Connect the RS-232C input jack to an external externally. control device (such as a computer or an A/V control system) and control the Monitor's functions - - Connect the serial port of the control device RS-232C connection cables RS-232C are not to the RS-232C jack on the TV back panel. with the TV. supplied Setup RGB N R O O RSN CO E PC T ype of Connector; Connector; D-Sub 9-Pin Male ype of No.
Reference Set Set ID Use this function to - Refer to 'Real Data - specify a TV ID number. Mapping'. See page 55. EZ Scan Manual Scan 1. Press the MENU button and then SETUP button to select the D/E use Channel Edit menu. 2. Press the G 3. Press the G Signal DTV button and then use button and then D/E use button to select Set ID. D/E button to choose the desired TV ID number. The adjust adjustment Input Source Input Label Set ID to range of Set ID Set ID 1 G is1~99. 4.
Reference 01. Power (Command2:a) 05. Volume Mute G To control Power On/Off of the TV. You Transmission 0 mute on/off. adjust mute using the MUTE button on Transmission Power Off : also can remote control.
Reference 09. Color (Command2:i) G To adjust the You can also 13. Remote Control Lock Mode color. screen G To lock the color in the Video adjust menu. Transmission Refer to 'Real data Data mapping'. See page 55. Acknowledgement 0: Lock off can also adjust You tint. screen can also adjust treble in the Audio menu. menu.
Reference These functions are 20. Tune Command available in 42PC3D G To /3DV, 50PC3D, 60PC1D model only. tune channel to (Command: m a) number following physical/major/minor Transmission 18. ISM Method (Command2:p) G To avoid having a fixed image [m][a][ ][Set ID][ ][Data0][ ][Data1][ ][Data2][ ][Data3][ ][Data4][ ][Data5][Cr] remain on screen.
Reference 21. Channel Add/Del (Command: m b) G To add and delete the channels Transmission [m][b][ ][Set ID][ ][Data][Cr] Data 0: Channel Delete 1: Channel Add Acknowledgement [b][ ][Set ID][ ][OK][Data][x] [b][ ][Set ID][ ][NG][Data][x] 22. Key (Command: G To send IR remote m key c) code Transmission [m][c][ ][Set ID][ ][Data][Cr] Data Key code: Refer to page 60. Acknowledgement [c][ ][Set ID][ ][OK][Data][x] 23. Input select(Command: G To select input source x b) (Main for TV.
Reference IR Codes Codes G Connect your wired remote control to the Remote Control port on the TV. G Output waveform Single pulse, modulated with 37.917KHz at 455KHz signal TC Carrier frequency FCAR 1/TC Duty T1 = ratio = = fOSC/12 T1/TC 1/3 = G Configuration of frame ? 1st frame Lead Low High code custom code custom code Data code Data code C0 C1C2C3C4C5C6C7C0C1C2C3C4C5C6C7D0D1D2D3D4D5D6D7D0D1D2D3D4D5D6D7 ? Repeat frame Repeat code Tf G Lead code 9ms 4.5 ms 0.
Reference 0B INPUT R/C Button 0F TV INPUT R/C Button 98 MULTIMEDIA R/C Button 08 POWER R/C Button C4 POWER ON Discrete IR Code C5 POWER OFF Discrete IR 79 RATIO R/C Button 0E TIMER 10~19 Number 4C 60 (Power On/Off) (Only Power On) Code (Only Power Off) R/C Button Key 0~9 R/C Button (Dash) R/C Button 1A FLASHBK R/C Button 09 MUTE R/C Button 02 VOL R/C Button 03 VOL E R/C Button 00 CH D R/C Button 01 CH E R/C Button 1E FAV R/C Button AA INFO R/C Butt
Reference Programming the Remote G The remote control is a multi-brand or universal remote control. It be can programmed to operate most remote-controllable devices of other manufacturers. Note that the remote control may not control all models of other brands. Programming 1 INPUT TV INPUT code into a a remote mode Test your remote control.
Reference Codes Programming Codes Codes Brand Codes AIWA Brand 034 KENWOOD 014 034 AKAI 016 043 047 048 125 146 001 101 046 124 LG AMPRO 072 ANAM 031 033 103 AUDIO DYNAMICS 039 043 (GOLDSTAR) Brand Codes 039 043 PORTLAND 108 Brand PULSAR 072 012 013 020 QUARTZ 011 014 106 114 123 QUASAR 033 066 075 145 RCA 013 020 033 034 Codes TATUNG 039 043 TEAC 034 039 043 TECHNICS 031 033 070 TEKNIKA 019 031 033 034 LLOYD 034 LXI 003 009 0
Reference Brand Codes ALPHASTAR DSR 123 Brand AMPLICA 050 BIRDVIEW 051 126 129 CHANNEL MASTER 013 014 015 036 055 CHAPARRAL 008 009 CITOH 054 CURTIS MATHES 050 145 DRAKE 005 006 007 011 052 112 012 018 Codes Brand Codes 133 134 PACE SKY SATELLITE 143 GENERAL INSTRUMENT 003 004 016 PANASONIC 060 031 059 101 PANSAT 121 HITACHI 139 140 HOUSTON TRACKER 033 037 057 104 077 029 PERSONAL CABLE 039 051 PHILIPS 117 WINEGARD 128 146 074 ZENITH 081
Reference T roubleshooting Checklist Checklist The ? doesn't work Power is suddenly Check to control The remote control does not work operation see if there is any obstruction. object normally. between the product ? Are batteries installed with correct ? Correct remote ? Install new ? Is the sleep ? Check the power control settings. Power interrupted No broadcast on station tuned with Auto off activated.
Reference The audio function does not work. No ? Press the VOL Picture OK & ? Sound muted? Press MUTE button. No sound ? Try ? Are the audio cables installed ? Adjust ? A output from of the one VOLUME button. or another channel. The Balance in menu with the broadcast. option.
Reference Product Specifications Specifications Dimensions with stand (Width x Height x Depth) 60PC1D x 40.8 1544.0 x 1035.5 without stand 60.8 (60PC1D-UE) 163 without stand Dimensions (Width x Height 44.4 42PC3D without stand Dimensions with stand 64.4 without stand 55.8 with stand 44.4 without stand 42PC3DV 44.4 (42PC3DV-UE) Dimensions (Width x Height 50PC3D without stand 54.0 with stand x 51.3 Depth) without stand 51.3 (50PC3D-UE) Weight Power mm kg 748.
Reference Dimensions 32LC2D 32LC2DU (32LC2D-UE 32LC2DU-UE) (Width x with stand 31.9 Height Depth) without stand Weight Dimensions 31.9 x 22.3 x 566.8 with stand 48.3 without stand 40.8 with stand 37.2 (37LC2D-UE) 65.0 without stand 54.9 with stand 41.5 Power kg 11.3 inches x 5.1 inches x 659.3 x 129.7 mm pounds / 29.5 kg pounds / 24.9 kg 32.0 x 41.5 x 1054.0 (42LC2D-UE) with stand 81.6 without stand 67.0 11.9 inches x x 29.4x 5.4 inches 746.
