OWNER’S MANUAL LED TV* * LG LED TVs are LCD TVs with LED backlighting. Click! User Guide Please read this manual carefully before operating your set and retain it for future reference. LB63** LB65** LB67** LB72** LB87** www.lg.
TABLE OF CONTENTS TABLE OF CONTENTS ENGLISH ENG 3 Licenses 35 REMOTE CONTROL 3 OPEN SOURCE SOFTWARE NOTICE 36 Magic Remote Functions 37 37 37 Registering Magic Remote How to use Magic Remote Precautions to Take when Using the Magic Remote 38 Using the User guide 38 MAINTENANCE 38 38 38 Cleaning your TV - Screen, frame, cabinet and stand - Power cord 39 TROUBLESHOOTING 40 SPECIFICATIONS 3 EXTERNAl CONTROL DEVICE SETUP 4 Safety Instructions 10 Viewing 3D Imaging (Only 3D models)
LICENSES / OPEN SOURCE SOFTWARE NOTICE / EXTERNAl CONTROL DEVICE SETUP 3 Licenses Supported licenses may differ by model. For more information about licenses, visit www.lg.com. ENGLISH ENG OPEN SOURCE SOFTWARE NOTICE To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in this product, please visit http://opensource.lge.com. In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download.
SAFETY INSTRUCTIONS Safety Instructions Please read these safety precautions carefully before using the product.
SAFETY INSTRUCTIONS yyWhen mounting TV onto wall make sure to neatly install and isolate cabling from rear of TV as to not create possibility of electric shock /fire hazard. yyDo not drop the product or let it fall over when connecting external devices. Otherwise, this may result in injury or damage to the product. yyKeep the anti-moisture packing material or vinyl packing out of the reach of children. Anti-moisture material is harmful if swallowed.
SAFETY INSTRUCTIONS ENGLISH ENG yyDo not allow any impact, shock or any objects to fall into the unit, and do not drop anything onto the screen. You may be injured or the product can be damaged. yyUnplug the TV from AC mains wall socket if you do not intend to use the TV for a long period of time. Accumulated dust can cause fire hazard and insulation deterioration can cause electric leakage/shock/fire. yyNever touch this product or antenna during a thunder or lighting storm. You may be electrocuted.
SAFETY INSTRUCTIONS yyIf you install the TV on a stand, you need to take actions to prevent the product from overturning. Otherwise, the product may fall over, which may cause injury. yyWhen installing the antenna, consult with a qualified service technician. If not installed by a qualified technician, this may create a fire hazard or an electric shock hazard. yyWe recommend that you maintain a distance of at least 2 to 7 times the diagonal screen size when watching TV.
SAFETY INSTRUCTIONS yyTake care not to touch the ventilation openings when watching the TV for long periods as the ventilation openings may become hot. This does not affect the operation or performance of the product. ENGLISH ENG yyPeriodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized servicer.
SAFETY INSTRUCTIONS yyContact the service centre once a year to clean the internal parts of the product. Accumulated dust can cause mechanical failure. yyIf the product feels cold to the touch, there may be a small “flicker” when it is turned on. This is normal, there is nothing wrong with product. yyThe panel is a high technology display product with resolution of two million to six million pixels.
SAFETY INSTRUCTIONS Viewing 3D Imaging (Only 3D models) WARNING ENGLISH ENG Viewing Environment yy Viewing Time -- When watching 3D contents, take 5 - 15 minute breaks every hour. Viewing 3D contents for a long period of time may cause headache, dizziness, fatigue or eye strain. Those that have a photosensitive seizure or chronic illness yy Some users may experience a seizure or other abnormal symptoms when they are exposed to a flashing light or particular pattern from 3D contents.
INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING 11 NOTE yy yy yy yy yy Installation Procedure 1 2 3 4 * Open the package and make sure all the accessories are included. Attach the stand to the TV set. Connect an external device to the TV set. Make sure the network connection is available. You can use the TV network functions only when the network connection is made. If the TV is turned on for the first time after it was shipped from the factory, initialization of the TV may take up to one minute.
ASSEMBLING AND PREPARING ENERGY AV MODE INPUT TV ENERGY AV MODE INPUT SAVING 1 2 3 4 5 6 7 8 9 0 FLASHBK LIST TV SAVING MARK 3D CH P A G E MUTE MENU INFO 2 4 5 7 8 9 0 FLASHBK LIST FAV VOL 1 MARK FAV VOL 3D CH P A G E MUTE Q.MENU MENU INFO ENGLISH ENG ENTER BACK 3 6 Q.MENU ENTER EXIT BACK EXIT L/R SELECT L/R SELECT FREEZE FREEZE RATIO RATIO Remote Control, Batteries (AAA) (Only LB63**, LB65**) (See p.
Cable Holder (Depending on model) (See p.25) Cable Managements 2EA (Only LB63**, LB65**, LB67**, LB72**) (See p.25) Stand Screws 4EA, M4 x L20 (Only 32LB65**) (See p.18) Stand Screws 4EA, M4 x L14 (Only LB63**, 42/47/50/60LB65**, LB67**, LB72**) 8EA, M4 x L14 (Only LB87**) (See p.18, 19, 20, 21) Stand Bases (Only LB63**, LB65**) (See p.18) Stand Assys (Stand Body/Stand Base) (Only LB67**, LB72**) (See p.18) Sound Bar (Only LB87**) (See p.19, 20) Stand Assys (Only LB87**) (See p.
ASSEMBLING AND PREPARING Separate purchase Separate purchase items can be changed or modified for quality improvement without any notification. Contact your dealer to buy these items. These devices only work with certain models.
ASSEMBLING AND PREPARING 15 Parts and buttons B type : LB67**, LB72** A type : LB63**, LB65** Screen Screen ENGLISH ENG Speakers Speakers Remote control and Intelligent1 sensors Power Indicator Remote control and Intelligent1 sensors Power Indicator Joystick Button2 Joystick Button2 C type : LB87** Screen Built-in Camera Speakers LG Logo light Remote control and Intelligent1 sensors Joystick Button2 1 Intelligent sensor - Adjusts the image quality and brightness based on the surrounding env
ASSEMBLING AND PREPARING NOTE yy You can set the LG Logo light or Power indicator Light to on or off by selecting General in the main menus. (Depending on model) ENGLISH ENG Using the Joystick button You can simply operate the TV functions by pressing to turn On/Off or sliding your finger over joystick button moving up, down, left or right. Basic Functions Power On When the TV is turned off, place your finger on the joystick button and press it once and release it.
ASSEMBLING AND PREPARING Lifting and moving the TV Please note the following advice to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size. 17 yy When transporting a large TV, there should be at least 2 people. yy When transporting the TV by hand, hold the TV as shown in the following illustration. ENGLISH ENG CAUTION yy Avoid touching the screen at all times, as this may result in damage to the screen.
ASSEMBLING AND PREPARING Setting up the TV LB67**, LB72** Image shown may differ from your TV. 1 Stand Body Attaching the stand ENGLISH ENG LB63**, LB65** 1 1 A stand base Stand Base A stand base B stand base 1 B stand base 2 1 2 1 Attach the stand to the TV using the upper mounting hole on the back of the TV. 2 Attach the stand to the TV using the lower connection on the back of the TV. 2 1 Attach the stand to the TV using the upper mounting hole on the back of the TV.
ASSEMBLING AND PREPARING LB87** 19 3 1 ENGLISH ENG Sound Bar Stand Assy Right Stand Assy Left M4 x L14 M4 x L14 4EA 4EA 2 4 Screw Cover
ASSEMBLING AND PREPARING CAUTION ENGLISH ENG yy When attaching the stand to the TV set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches. yy Make sure that the screws are fastened completely. (If they are not fastened securely enough, the TV may tilt forward after being installed.) Do not use too much force and over tighten the screws; otherwise screw may be damaged and not tighten correctly.
ASSEMBLING AND PREPARING 3 21 CAUTION 4EA 4 Screw Cover ENGLISH ENG M4 x L14 yy When attaching the Sound Bar Supporter to the TV set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches. yy Make sure that the screws are inserted correctly and fastened securely. (If they are not fastened securely enough, the TV may tilt forward after being installed.
ASSEMBLING AND PREPARING Using the Kensington security system NOTE ENGLISH ENG yy Remove the sound bar supporter before installing the stand by performing the sound bar supporter attachment in reverse. yy The Screw Cover will protect the opening from accumulating dust and dirty. (This feature is not available for all models.) yy Image shown may differ from your TV. The Kensington security system connector is located at the rear of the TV.
ASSEMBLING AND PREPARING Securing the TV to a wall (This feature is not available for all models.) 2 3 Insert and tighten the eye-bolts, or TV brackets and bolts on the back of the TV. -- If there are bolts inserted at the eyebolts position, remove the bolts first. Mount the wall brackets with the bolts to the wall. Match the location of the wall bracket and the eye-bolts on the rear of the TV. Connect the eye-bolts and wall brackets tightly with a sturdy rope.
ASSEMBLING AND PREPARING Make sure to use screws and wall mount bracket that meet the VESA standard. Standard dimensions for the wall mount kits are described in the following table.
ASSEMBLING AND PREPARING Tidying cables 25 CAUTION Image shown may differ from your TV. (Only LB63**, 42/47/50/60LB65**, LB67**, LB72**) Cable Holder Cable Management (Only 32LB65**) Cable Management (Only LB87**) Cable Holder Cable Management ENGLISH ENG 1 Gather and bind the cables with the cable holder. (Depending on model) 2 Fix the Cable Management firmly to the TV. yy Do not move the TV by holding the cable holder, as the cable holder may break, and injuries and damage to the TV may occur.
ASSEMBLING AND PREPARING Using Built-in Camera (Only LB87**) ENGLISH ENG You can make a Skype video call or use the motion recognition function using the built-in camera of the TV. This TV does not support the use of an external camera. Preparing Built-in Camera 1 Pull up the slide at the back of the TV.
ASSEMBLING AND PREPARING 3 27 Push down the built-in camera when you are not using it. ENGLISH ENG 7 5 7 5 5 7 Name of Parts of Built-in Camera Camera Lens Protective Film Microphones 7 5 Checking the Camera’s Shooting Range 1 Press the (Home) button on the remote control to display the Home menu. 2 Select CAMERA Wheel(OK) button. and then press the NOTE yy The optimal distance from the camera to use the motion recognition function is between 1.5 m and 4.5 m.
MAKING CONNECTIONS MAKING CONNECTIONS This section on MAKING CONNECTIONS mainly uses diagrams for the 42LB65** models. Antenna connection Connect the TV to a wall antenna socket with an RF cable (75 Ω). ENGLISH ENG Connect various external devices to the TV and switch input modes to select an external device. For more information of external device’s connection, refer to the manual provided with each device.
MAKING CONNECTIONS HDMI connection 29 (Only LB87**) ENGLISH ENG Transmits the digital video and audio signals from an external device to the TV. Connect the external device and the TV with the HDMI cable as shown. Choose any HDMI input port to connect. It does not matter which port you use. ARC (Audio Return Channel) yyAn external audio device that supports SIMPLINK and ARC must be connected using HDMI IN 1 (ARC) or HDMI/DVI IN 1 (ARC) port.
MAKING CONNECTIONS DVI to HDMI connection (Only LB87**) ENGLISH ENG Transmits the digital video signal from an external device to the TV. Connect the external device and the TV with the DVI-HDMI cable as shown. To transmit an audio signal, connect an audio cable. Choose any HDMI input port to connect. It does not matter which port you use.
MAKING CONNECTIONS Component connection (Only LB87**) Transmits analog video and audio signals from an external device to the TV. Connect the external device and the TV with a component cable as shown. IN AV VIDEO COMPONENT AUDIO PR YELLOW (Use the composite gender cable provided.
MAKING CONNECTIONS Composite connection (Only LB87**) Transmits analog video and audio signals from an external device to the TV. Connect the external device and the TV with the composite cable as shown. ENGLISH ENG (Only LB63**, LB65**, LB67**, LB72**) AV VIDEO COMPONENT COMPONENT AUDIO PR PB PB Y Y RED WHITE RED WHITE RED (*Not Provided) YELLOW RED WHITE YELLOW WHITE YELLOW YELLOW RED WHITE YELLOW YELLOW (Use the composite gender cable provided.
MAKING CONNECTIONS 33 Headphone connection Audio connection Transmits the headphone signal from the TV to an external device. Connect the external device and the TV with the headphone. You may use an optional external audio system instead of the built-in speaker. Digital optical audio connection (*Not Provided) (*Not Provided) NOTE yyAUDIO menu items are disabled when connecting a headphone. yyOptical Digital Audio Out is not available when connecting a headphone.
MAKING CONNECTIONS USB connection MHL connection Connect a USB storage device such as a USB flash memory, external hard drive, or a USB memory card reader to the TV and access the SmartShare menu to use various multimedia files. Mobile High-definition Link (MHL) is an interface for transmitting digital audiovisual signals from mobile phones to television sets.
REMOTE CONTROL 35 REMOTE CONTROL CAUTION yyDo not mix old and new batteries, as this may damage the remote control. yyIn Analogue TV and some countries, some remote control buttons may not work. Make sure to point the remote control toward the remote control sensor on the TV. (Only LB63**, LB65**) (POWER) Turns the TV on or off. INPUT Changes the input source. SETTINGS Accesses the main menus. 1 INFO Views the information of the current programme and screen. (Depending on model) 1 RATIO Resizes an image.
MAGIC REMOTE FUNCTIONS Magic Remote Functions This item is not included for all models. ENGLISH ENG When the message “Magic Remote battery is low. Change the battery.” is displayed, replace the battery. To replace batteries, open the battery cover, replace and ends to the label inside the compartment, batteries (1.5 V AA) matching and close the battery cover. Be sure to point the remote control toward the remote control sensor on the TV.
MAGIC REMOTE FUNCTIONS Voice recognition (Depending on model) Network connection is required to use the voice recognition function. 1 Press the Voice recognition button. • • • The voice recognition may fail when you speak too fast or too slow. Use the Magic Remote no further than 10 cm from your face. The recognition rate may vary depending on the user’s characteristics (voice, pronunciation, intonation and speed) and the environment (noise and TV volume).
USING THE USER GUIDE / MAINTENANCE Using the User guide MAINTENANCE User Guide allows you to more easily access the detailed TV information. Cleaning your TV ENGLISH ENG (Home) button to access the 1 Press the Home menu. 2 Select User Guide and press Wheel(OK). Clean your TV regularly to keep the best performance and to extend the product lifespan. CAUTION yy Make sure to turn the power off and disconnect the power cord and all other cables first.
TROUBLESHOOTING 39 TROUBLESHOOTING Problem Solution yy Check the remote control sensor on the product and try again. yy Check if there is any obstacle between the product and the remote control. yy Check if the batteries are still working and properly installed ( to , to ). No image display and no sound is produced. yy Check if the product is turned on. yy Check if the power cord is connected to a wall outlet. yy Check if there is a problem in the wall outlet by connecting other products.
SPECIFICATIONS SPECIFICATIONS Wireless module(LGSBW41) Specifications ENGLISH ENG Wireless LAN Bluetooth Standard IEEE 802.11a/b/g/n Standard Bluetooth Version 3.0 Frequency ragne 2400 to 2483.5 MHz 5150 to 5250 MHz 5725 to 5850 MHz Frequency ragne 2400 to 2483.5 MHz Output power (Max.) 802.11a: 13 dBm 802.11b: 15 dBm 802.11g: 14 dBm 802.11n - 2.4GHz: 16 dBm 802.11n - 5GHz: 16 dBm Output power (Max.
SPECIFICATIONS 41 Product specifications may be changed without prior notice due to upgrade of product functions. For the power supply and power consumption, refer to the label attached to the product. 47LB63** 32LB65** Dimensions (W x H x D) 42LB6310-CC 47LB6310-CC 32LB6500-CA 960 x 610 x 218 1072 x 677 x 247 731 x 484 x 207 Without stand (mm) 960 x 567 x 54.5 Weight With stand (mm) 1072 x 629 x 54.5 731 x 437 x 54.5 With stand (kg) 9.9 13.4 6.5 Without stand (kg) 9.6 13.0 6.
SPECIFICATIONS MODELS 55LB72** 65LB72** 55LB7200-CA 65LB7200-CA 1231 x 769 x 247 1449.5 x 883.7 x 313.9 ENGLISH ENG Dimensions (W x H x D) With stand (mm) Weight With stand (kg) 19 27.9 Without stand (kg) 18.5 26.5 Without stand (mm) 1231 x 718 x 55.1 AC 100-240 V~ 50 / 60 Hz AC 100-240 V~ 50 / 60 Hz Power requirement 49LB87** 55LB87** 60LB87** 49LB8700-CA 55LB8700-CA 60LB8700-CA 1091 x 690 x 229 1227 x 769 x 229 1335 x 830 x 261 Without stand (mm) 1091 x 632 x 34.
Record the model number and serial number of the TV. Refer to the label on the back cover and quote this information to your dealer when requiring any service.
OWNER’S MANUAL EXTERNAL CONTROL DEVICE SETUP Please read this manual carefully before operating the set and retain it for future reference. www.lg.
2 KEY CODES ENGLISH ENG KEY CODES • This feature is not available for all models.
EXTERNAL CONTROL DEVICE SETUP 3 • Image shown may differ from your TV. Connect the USB to Serial converter/RS-232C input jack to an external control device (such as a computer or an A/V control system) to control the product’s functions externally. Note: The type of control port on the TV can be different between model series. * Please be advised that not all models support this type of connectivity. * Cable is not provided.
USB USB IN IN 4 EXTERNAL CONTROL DEVICE SETUP (PC) (PC) (TV) (TV) RS-232C IN (CONTROL SERVICE) • You need to purchase the phone-jack to RS-232 cable required for &the connection between the PC and the TV, which is specified in the manual. RS-232C IN (PC) (PC) (CONTROL & SERVICE) * For other models, connect to the USB port. * The connection interface may differ from your TV.
EXTERNAL CONTROL DEVICE SETUP 5 • Baud rate : 9600 bps (UART) • Data length : 8 bits • Parity : None ENGLISH ENG Communication Parameters • Stop bit : 1 bit • Communication code : ASCII code • Use a crossed (reverse) cable. Command reference list (Depending on model) COMMAND1 COMMAND2 DATA (Hexadecimal) 01. Power* k a 00 to 01 02. Aspect Ratio k c (p.7) 03. Screen Mute k d (p.7) k e 00 to 01 k f 00 to 64 06. Contrast k g 00 to 64 07. Brightness k h 00 to 64 08.
6 EXTERNAL CONTROL DEVICE SETUP ENGLISH ENG Transmission / Receiving Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] : First command to control the TV. (j, k, m or x) [Command 2] : Second command to control the TV. [Set ID] : You can adjust the [Set ID] to choose desired monitor ID number in option menu. Adjustment range in TV is 1 to 99. If [Set ID] value is selected to ‘0’, every connected set can be controlled.
EXTERNAL CONTROL DEVICE SETUP 7 01. Power (Command: k a) ►► To control Power *On or Off of the set. Transmission[k][a][ ][Set ID][ ][Data][Cr] Data 00 : Power Off 01 : *Power On Ack [a][ ][Set ID][ ][OK/NG][Data][x] ►► To Show TV is Power On or *Off Transmission [k][a][ ][Set ID][ ][FF][Cr] Ack [a][ ][Set ID][ ][OK][Data][x] * Similarly, if other functions transmit ‘FF’ data based on this format, Acknowledgement feedback presents status about each function. 02.
8 EXTERNAL CONTROL DEVICE SETUP ENGLISH ENG Data Min : 00 to Max : 64 * (Depending on model) Ack [i][ ][Set ID][ ][OK/NG][Data][x] 09. Tint (Command: k j) ►► To adjust the screen tint. You can also adjust tint in the PICTURE menu. Transmission [k][j][ ][Set ID][ ][Data][Cr] Data Red : 00 to Green : 64 Ack [j][ ][Set ID][ ][OK/NG][Data][x] 10. Sharpness (Command: k k) ►► To adjust the screen sharpness. You can also adjust sharpness in the PICTURE menu.
EXTERNAL CONTROL DEVICE SETUP 0 0 5th Band 0 0 1 0 1 20(decimal) Acknowledgement [v][ ][Set ID][ ][OK/NG][Data][x] * It depends on model, and can adjust when sound mode is EQ adjustable value. 19. Energy Saving (Command: j q) ►► To reduce the power consumption of the TV. You can also adjust Energy Saving in PICTURE menu.
10 EXTERNAL CONTROL DEVICE SETUP ENGLISH ENG Number - 22 : Antenna TV (DTV) – Don’t Use Physical Channel Number - 26 : Cable TV (CADTV) - Don’t Use Physical Channel Number - 46 : Cable TV (CADTV) – Use Major Channel Number Only (One Part Channel) Two bytes are available for each major and minor channel data, but usually the low byte is used alone (high byte is 0). * Tune Command Examples: 1. Tune to the Analog cable (NTSC) channel 35.
EXTERNAL CONTROL DEVICE SETUP ►► To select input source for main picture. Transmission [x][b][ ][Set ID][ ][Data][Cr] Data 00 : DTV 01 : CADTV 02 : Satellite DTV 10 : ATV ISDB-BS (Japan) 03 : ISDB-CS1 (Japan) 04 : ISDB-CS2 (Japan) 11 : CATV O 01 X X X 02 X X X 03 X O O [Data03][x] [t][ ][Set ID][ ][NG][Data00][x] 40 : Component1 60 : RGB 41 : Component2 90 : HDMI1 92 : HDMI3 91 : HDMI2 93 : HDMI4 26.
12 EXTERNAL CONTROL DEVICE SETUP ENGLISH ENG 27. Auto Configure (Command: j u) (Depending on model) ►► To adjust picture position and minimize image shaking automatically. It works only in RGB (PC) mode.
