OLED TV EW96** AAA X4 (M4 X L12) www.lg.
1 2 4 5 3
ANTENNA / CABLE IN HDMI IN HDMI IN/ARC USB IN H/P OUT Satellite IN
Satellite IN PCMCIA CARD SLOT OPTICAL DIGITAL AUDIO OUT : Depending on model / CLOCK
AV IN VIDEO L/MONO AUDIO R COMPONENT IN AUDIO VIDEO
1 2 3 4
0 1 E A 2 D B F A B C G C D E F F G 55EW961H-TA 1229 759 225 715 48.6 19.5 16.2 65EW961H-TA 1451 882 225 838 48.6 25.9 22.
OWNER’S MANUAL Safety and Reference Please read this manual carefully before operating your set and retain it for future reference. www.lg.
Safety instructions Please read these safety precautions carefully before using the product. ENGLISH WARNING Make sure to connect Mains cable to compliant AC mains socket with Grounded earth pin. (Except for devices which are not grounded on earth.) Otherwise possibility you may be electrocuted or injured.
Des ENGLISH Do not drop the product or let it fall over when connecting external devices. Otherwise, this may result in injury or damage to the product. Do not drop metallic objects such as coins, hair pins, chopsticks or wire into the product, or inflammable objects such as paper and matches. Children must pay particular attention. Electrical shock, fire or injury can occur. If a foreign object is dropped into the product, unplug the power cord and contact the service centre.
ENGLISH If any of the following occur, unplug the product immediately and contact your local service centre. • The product has been impacted by shock • The product has been damaged • Foreign objects have entered the product • The product produced smoke or a strange smell This may result in fire or electric shock. Be careful in handling the adapter to prevent any external shocks to it. An external shock may cause damage to the adapter.
We recommend that you maintain a distance of at least 2 to 7 times the diagonal screen size when watching TV. If you watch TV for a long period of time, this may cause blurred vision. Only use the specified type of battery. This could cause damage to the remote control. Do not mix new batteries with old batteries. This may cause the batteries to overheat and leak. Batteries should not be exposed to excessive heat. For example, keep away from direct Sunlight , open fireplace and electric heaters.
ENGLISH Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. When moving the product, make sure you turn the power off first. Then, unplug the power cables, antenna cables and all connecting cables. The TV set or power cord may be damaged, which may create a fire hazard or cause electric shock.
Preparing NOTE Displaying a still image for a prolonged period of time may cause image sticking. Avoid displaying a fixed image on the TV screen for a long period of time. Some horizontal lines may appear when the Clear Panel Noise feature is performed. It is normal and there is no need to be concerned. Generated Sound “Cracking” noise: A cracking noise that occurs when watching or turning off the TV is generated by plastic thermal contraction due to temperature and humidity.
Separate purchase ENGLISH Separate purchase items can be changed or modified for quality improvement without any notification. Contact your dealer to buy these items. These devices only work with certain models. The model name or design may be changed depending on the upgrade of product functions, manufacturer’s circumstances or policies.
Basic functions WARNING Power On (Press) Power Off (Press and hold) 1 Programmes Control 1 All running apps will close, and any recording in progress will stop. Adjusting the menu When the TV is turned on, press the button one time. You can adjust the Menu items pressing or moving the buttons. Turns the power off. ENGLISH Volume Control • If a television is not positioned in a sufficiently stable location, it can be potentially hazardous due to falling.
ENGLISH Mounting on a wall Connections (notifications) Attach an optional wall mount bracket at the rear of the TV carefully and install the wall mount bracket on a solid wall perpendicular to the floor. When you attach the TV to other building materials, please contact qualified personnel. LG recommends that wall mounting be performed by a qualified professional installer. We recommend the use of LG’s wall mount bracket. LG’s wall mount bracket is easy to move with cables connected.
Antenna connection Speaker Output Setup Connect the TV to a wall antenna socket with an RF cable (75 Ω). (Depending on model) ENGLISH • Use a signal splitter to use more than 2 TVs. • If the image quality is poor, install a signal amplifier properly to improve the image quality. • If the image quality is poor with an antenna connected, try to realign the antenna in the correct direction. • An antenna cable and converter are not supplied.
Network Setup Other connections Wired network connection Connect your TV to external devices. For the best picture and audio quality, connect the external device and the TV with the HDMI cable. Some separate cable is not provided. ENGLISH (Depending on model) This TV can be connected to a Pro:Centric server via the LAN port. After making the physical connection, the TV needs to be set up for network communication.
A ENGLISH C D B A (POWER) Turns the TV on or off. Adjusts the brightness of the screen to reduce energy consumption. By zooming in on the selected area, you can view it in full screen. Changes the input source. Selects Radio, TV and DTV programme. Number buttons Enters numbers. Accesses the saved programme list. (Space) Opens an empty space on the screen keyboard. Returns to the previously viewed programme. B C Shows programme guide. Displays and removes hotel interactive menu.
ENGLISH Licenses Troubleshooting Supported licenses may differ by model. For more information about licenses, visit www.lg.com. The software version can be updated for improvement in performance. Customer needs to ensure the compatibility of customer’s equipment with LGE software. If needed, please consult with LGE and upload revised software version according to the guidance provided by LGE. Manufactured under license from Dolby Laboratories.
Specifications Wireless module specification ENGLISH • As band channels can vary per country, the user cannot change or adjust the operating frequency. This product is configured for the regional frequency table. • For consideration of the user, this device should be installed and operated with a minimum distance of 20 cm between the device and the body. Wireless module (LGSBWAC61) specifications Wireless LAN (IEEE 802.11a/b/g/n/ac) Frequency Range Output Power (Max.) 2400 to 2483.
HDMI-DTV supported mode ENGLISH Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) 720 x 480 31.47 31.50 59.94 60.00 720 x 576 31.25 50.00 1280 x 720 44.96 45.00 37.50 59.94 60.00 50.00 1920 x 1080 28.12 33.72 33.75 26.97 27.00 33.71 33.75 56.25 67.43 67.50 50.00 59.94 60.00 23.97 24.00 29.97 30.00 50.00 59.94 60.00 53.95 54.00 56.25 61.43 67.50 112.50 135.00 135.00 53.95 54.00 56.25 61.43 67.50 112.50 135.00 135.00 23.98 24.00 25.00 29.97 30.00 50.00 59.94 60.00 23.98 24.00 25.
Video codec Photo format File Format Resolution .jpeg, .jpg, .jpe JPEG Minimum: 64 (W) x 64 (H) Maximum(Normal Type): 15360 (W) x 8640 (H) Maximum (Progressive Type): 1920 (W) x 1440 (H) .png PNG Minimum: 64 x 64 Maximum: 5760 (W) x 5760 (H) BMP Minimum: 64 x 64 Maximum: 1920 (W) x 1080 (H) .bmp Audio format File Format .mp3 .wav .ogg .wma Item Info Bit rate 32 Kbps - 320 Kbps Sample freq. 16 kHz - 48 kHz Support MPEG1, MPEG2 Channels Mono, stereo Bit rate - Sample freq.
Record the model number and serial number of the TV. Refer to the label on the back cover and quote this information to your dealer when requiring any service.
IR CODES yy This feature is not available for all models.
EXTERNAL CONTROL DEVICE SETUP Type of Connector : D-Sub 9-Pin Male 1 5 ENGLISH RS-232C Setup • Image shown may differ from your TV. Connect the RS-232C (serial port) input jack to an external control device (such as a computer or an A/V control system) to control the product’s functions externally. Connect the serial port of the control device to the RS-232C jack on the product back panel. NOTE • RS-232C connection cables are not supplied with the product.
Command Reference List RS-232C Configurations (Depending on Model) 7-Wire Configurations (Standard RS-232C cable) PC TV RXD TXD GND DTR DSR RTS CTS 2 3 5 4 6 7 8 3 2 5 6 4 8 7 D-Sub 9 D-Sub 9 TXD RXD GND DSR DTR CTS RTS 3-Wire Configurations (Not standard) PC TV RXD TXD GND DTR DSR RTS CTS 2 3 5 4 6 7 8 3 2 5 6 4 7 8 D-Sub 9 D-Sub 9 TXD RXD GND DTR DSR RTS CTS Set ID Set ID number. “Real Data Mapping”.
Transmission / Receiving Protocol (Depending on Model) 01. Power (Command: k a) ►► To control Power On/Off of the set. ENGLISH Transmission [k][a][ ][Set ID][ ][Data][Cr] Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] : First command to control the TV.(j, k, m or x) [Command 2] : Second command to control the TV. [Set ID] : You can adjust the set ID to choose desired monitor ID number in option menu. Adjustment range is 1 to 99.
03. Screen Mute (Command: k d) 06. Contrast (Command: k g) ►► To select screen mute on/off. ►► To adjust screen contrast. You can also adjust contrast in the PICTURE menu. Data 00 : Screen mute off (Picture on) Video mute off 01 : Screen mute on (Picture off) 10 : Video mute on Ack [d][ ][Set ID][ ][OK/NG][Data][x] * In case of video mute on only, TV will display On Screen Display(OSD). But, in case of Screen mute on, TV will not display OSD. 04.
09. Tint (Command: k j) 12. Remote control lock mode (Command: k m) ►► To adjust the screen tint. You can also adjust tint in the PICTURE menu. ►► To lock the front panel controls on the monitor and remote control. ENGLISH Transmission [k][j][ ][Set ID][ ][Data][Cr] Transmission [k][m][ ][Set ID][ ][Data][Cr] Data 00 : Lock off Data Red : 00 to Green : 64 01 : Lock on Ack [m][ ][Set ID][ ][OK/NG][Data][x] * Refer to Real data mapping.
14. Colour Temperature (Command: x u) 16. Auto Configuration (Command: j u) (Only RGB support model) ►► To adjust colour temperature. You can also adjust Colour Temperature in the PICTURE menu. ►► To adjust picture position and minimize image shaking automatically. It works only in RGB (PC) mode. Transmission [x][u][ ][Set ID][ ][Data][Cr] Data Warm: 00 to Cool:64 ENGLISH Transmission [j][u][ ][Set ID][ ][Data][Cr] Data 01 : To set * Refer to Real data mapping.
18. Tune Command (Command: m a) 20. Key (Command: m c) ►► Select channel to following physical number. ►► To send IR remote key code. Transmission [m][c][ ][Set ID][ ][Data][Cr] ENGLISH Transmission [m][a][ ][Set ID][ ][Data 00][ ][Data 01][ ][Data 02][Cr] Data 00 : High channel data Data Data 01 : Low channel data ex. No. 47 -> 00 2F (2FH) No. 394 -> 01 8A (18AH), DTV No.
Input Number Data 0 0 0 Input1 0 0 0 1 Input2 0 0 1 0 Input3 0 0 1 1 Input4 ENGLISH 0 Ack [b][ ][Set ID][ ][OK/NG][Data][x] * Real data mapping 00 : Step 0 A: Step 10 (Set ID 10) F: Step 15 (Set ID 15) 10 : Step 16 (Set ID 16) 64 : Step 100 6E : Step 110 73 : Step 115 74 : Step 116 CF : Step 199 FE : Step 254 FF : Step 255 9
