ENGLISH OWNER’S MANUAL LCD TV 42LD6*** 47LD6*** 55LD6*** Please read this manual carefully before operating your set and retain it for future reference. www.lg.
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
CONTENTS PREPARATION Front Panel Controls ......................................... IV Back Panel Information......................................V Stand Installation............................................... VI Back Cover for Wire Arrangement....................VI Swivel Stand.....................................................VII Not Using the desk-type stand.........................VII Attaching the TV to a desk...............................VII Kensington Security System.........................
CONTENTS CONTENTS EPG(ELECTRONIC PROGRAMME GUIDE)(IN DIGITAL MODE) Switch on/off EPG..............................................93 Select a programme...........................................93 Button Function in NOW/NEXT Guide Mode....93 Button Function in 8 Day Guide Mode..............94 Button Function in Date Change Mode.............95 Button Function in Extended Description Box. Button Function in Remind Setting Mode.................96 Button Function in Schedule List Mode..............
PREPARATION ACCESSORIES EN ER GY AV SAVI NG 7pq T 0 MA ME NU MU DE TE 4g hi 8 tu RK CH FAV AR RA /NUM TIO LE TE Q.M DE INPU 2 ab c l 9 wxy 6m 3d TV RA / D ef no z Q.V IEW P E OK MO T 5 jk v [ LIS rs 1.,;@ A G P EN U BA CK GU ID E PREPARATION Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the dealer where you purchased the TV. ■■ Image shown may differ from your TV.
PREPARATION FRONT PANEL CONTROLS NOTE PREPARATION ►TV ► can be placed in standby mode in order to reduce the power consumption. The energy consumed during use can be significantly reduced if the level of brightness of the picture is reduced, and this will reduce the overall running cost. CAUTION ► Do not drag the TV. The floor or the product may be damaged. ■■ Image shown may differ from your TV.
PREPARATION BACK PANEL INFORMATION 13 USB IN 1 PREPARATION USB IN 2 ■■ Image shown may differ from your TV. 4 5 6 VIDEO L/MONO AUDIO R 1 1 2 3 9 14 15 ANTENNA IN CABLE IN 11 7 7 AV IN 2 2 AV IN 1 8 HDMI IN 3 3 VIDEO L/MONO AUDIO R 2 H/P 1 12 10 Power Cord Socket This TV operates on an AC power. The voltage is indicated on the Specifications page. (► p.138) Never attempt to operate the TV on DC power. LAN Network connection for AccuWeather, Picasa, YouTube, etc.
PREPARATION STAND INSTALLATION PREPARATION ■■ Image shown may differ from your TV. When assembling the desk type stand, check whether the bolt is fully tightened. (If not tightened fully, the product can tilt forward after the product installation.) If you tighten the bolt with excessive force, the bolt can deviate from abrasion of the tightening part of the bolt. 1 Carefully place the TV screen side down on a cushioned surface to protect the screen from damage.
PREPARATION SWIVEL STAND (Only 42LD6 ***) ■■ Image shown may differ from your TV. The TV must be attached to desk so it cannot be pulled in a forward/backward direction, potentially causing injury or damaging the product. Use only an attached screw. PREPARATION ■■ Image shown may differ from your TV. After installing the TV, you can adjust the TV set manually to the left or right direction by 20 degrees to suit your viewing position.
PREPARATION KENSINGTON SECURITY SYSTEM PREPARATION ■■ This feature is not available for all models. ■■ Image shown may differ from your TV. he TV is equipped with a Kensington Security T System connector on the back panel. Connect the Kensington Security System cable as shown below. For the detailed installation and use of the Kensington Security System, refer to the user’s guide provided with the Kensington Security System. For further information, contact http://www.kensington.
PREPARATION ■■ The TV can be installed in various ways such as on a wall, or on a desktop etc. ■■ The TV is designed to be mounted horizontally. Ensure that you connect the earth wire to prevent possible electric shock. If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to earth the TV by connecting it to telephone wires, lightening rods or gas pipes.
PREPARATION REMOTE CONTROL KEY FUNCTIONS When using the remote control, aim it at the remote control sensor on the TV. PREPARATION (POWER) Switches the TV on from standby or off to standby. ENERGY Adjust the Energy Saving mode of the TV.(► p.100) SAVING ABC DEF GHI JKL MNO PQRS TUV WXYZ AV MODE It helps you select and set images and sounds when connecting AV devices.(► p.51) INPUT External input mode rotate in regular sequence. TV/RAD Selects Radio, TV and DTV channel. MENU Selects a menu.
PREPARATION ABC DEF GHI JKL MNO PQRS TUV WXYZ A to Z Character Selects a Character for NetCast menu. button PREPARATION 0 to 9 number Selects a programme. button Selects numbered items in a menu. LIST Displays the programme table. Q.VIEW Returns to the previously viewed programme. Coloured These buttons are used for Programme edit. buttons See a list of AV devices connected to TV. When you toggle this button, the Simplink menu appears at the screen.
PREPARATION PREPARATION VOLUME UP Adjusts the volume. /DOWN ABC DEF GHI JKL MNO PQRS TUV WXYZ MARK Select the input to apply the Picture Wizard settings. Check and un-check programmes in the USB menu. FAV Displays the selected favourite programme. CHAR/NUM Shifts the Character or Number for NetCast menu. RATIO Selects your desired Aspect Ratio of picture. DELETE Deletes the entered character when entering the character on the screen keyboard. MUTE Switches the sound on or off.
EXTERNAL EQUIPMENT SETUP ■■ To prevent damage do not connect to the mains outlet until all connections are made between the devices. ANTENNA CONNECTION ■■ For optimum picture quality, adjust antenna direction. ■■ An antenna cable and converter are not supplied.
EXTERNAL EQUIPMENT SETUP ■■ To avoid damaging any equipment, never plug in any power cord until you have finished connecting all equipment. ■■ Image shown may differ from your TV. CONNECTING WITH A COMPONENT CABLE 1 2 Connect the video outputs (Y, PB, PR) of the external equipment (digital set-top box, DVD, etc.) to the COMPONENT IN VIDEO jacks on the TV. 1 Connect the audio output of the external equipment (digital set-top box, DVD, etc.) to the COMPONENT IN AUDIO jacks on the TV.
EXTERNAL EQUIPMENT SETUP CONNECTING WITH AN HDMI CABLE 1 HDMI / DVI IN 2 Turn on the external equipment. (Refer to the external equipment's manual for operating instructions.) 3 Select HDMI1, HDMI2 or HDMI3 input source using the INPUT button on the remote control. 2 1 1 NOTE EXTERNAL EQUIPMENT SETUP Connect the HDMI output of the external equipment (digital settop box, DVD, etc.) to HDMI/DVI IN 1, HDMI/DVI IN 2 or HDMI IN 3 jack on the TV.
EXTERNAL EQUIPMENT SETUP CONNECTING WITH AN HDMI TO DVI CABLE EXTERNAL EQUIPMENT SETUP 2 3 4 Connect the digital set-top box or the DVI output of the PC to HDMI/DVI IN 1 or HDMI/DVI IN 2 jack on the TV. Connect the audio output of the digital set-top box or the PC audio output to the AUDIO IN (RGB/DVI) jack on the TV. Turn on the digital set-top box or the PC and the TV. (Refer to the digital set-top box or the PC manual for operating instructions.
EXTERNAL EQUIPMENT SETUP USB SETUP 2 Connect the USB device to the USB IN 1 or USB IN 2 jack on the TV. 1 EXTERNAL EQUIPMENT SETUP 1 or After connecting the USB IN 1 or USB IN 2 jack, you use the USB function. CONNECTING WITH AN RF CABLE To avoid picture noise (interference), allow adequate distance between the VCR and TV. 1 Connect the ANT OUT socket of the VCR to the ANTENNA IN socket on the TV. 2 Connect the antenna cable to the ANT IN socket of the VCR.
EXTERNAL EQUIPMENT SETUP CONNECTING WITH AN RCA CABLE 1 EXTERNAL EQUIPMENT SETUP 2 Connect the AUDIO/VIDEO jacks between TV and VCR or external equipment. Match the jack colours (Video = yellow, Audio Left = white, and Audio Right = red) 2 Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.) 1 1 AV IN 1 Or, Operate the corresponding external equipment. (Refer to external equipment operating guide.
EXTERNAL EQUIPMENT SETUP CONNECTING WITH A D-SUB 15 PIN CABLE This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings. 2 Connect the PC audio output to the AUDIO IN (RGB/DVI) jack on the TV. HDMI / DVI IN 2 1 3 Turn on the PC and the TV 4 Select RGB input source using the INPUT button on the remote control. AV IN 1 1 2 2 1 EXTERNAL EQUIPMENT SETUP Connect the RGB output of the PC to the RGB IN (PC) jack on the TV.
EXTERNAL EQUIPMENT SETUP HEADPHONE SETUP You can listen the sound through the headphone. EXTERNAL EQUIPMENT SETUP 8 1 Plug the headphone into the headphone socket. 2 To adjust the headphone volume, press the + or - button. If you press the MUTE button, the sound from the headphone is switched off. NOTE ►►AUDIO menu items are disabled when connecting a headphone. ►►When changing AV MODE with a headphone connected, the change is applied to video but not to audio.
EXTERNAL EQUIPMENT SETUP DIGITAL AUDIO OUT SETUP Sending the TV’s audio signal to external audio equipment via the Digital Audio Output (Optical) port. If you want to enjoy digital broadcasting through 5.1-channel speakers, connect the OPTICAL DIGITAL AUDIO OUT terminal on the back of TV to a Home Theater (or amp). 2 onnect the other end of the optical cable to C the digital audio (Optical) input on the audio equipment. 3 Set the “TV Speaker option - Off ” in the AUDIO menu.(►p.118).
EXTERNAL EQUIPMENT SETUP EXTERNAL EQUIPMENT WIRELESS CONNECTION LG TVs with a Wireless Control port support the LG Wireless Media Box, which is sold separately. When you connect the Wireless Ready Dongle (included with the Wireless Media Box) to the TV, external devices can be connected to the LG Wireless Media Box and video and audio will be sent to the TV wirelessly. EXTERNAL EQUIPMENT SETUP After the wireless is connected, press the INPUT button to view the wireless input screen.
EXTERNAL EQUIPMENT SETUP SUPPORTED DISPLAY RESOLUTION RGB-PC, HDMI/DVI-PC mode HDMI/DVI-DTV mode Vertical Frequency (Hz) 31.469 59.94 Horizontal Frequency (kHz) Vertical Frequency (Hz) 720x400 31.468 70.08 640x480 31.469 59.94 800x600 37.879 60.31 1024x768 48.363 60.00 1280x768 47.78 59.87 1360x768 47.72 59.80 45 60 1280x1024 63.595 60.00 33.72 59.94 66.587 59.93 33.75 60 28.125 50 67.5 60.00 26.97 23.97 27 24 33.716 29.976 33.75 30.
EXTERNAL EQUIPMENT SETUP SCREEN SETUP FOR PC MODE Screen Reset Returns Position, Size and Phase to the factory default settings. PICTURE Move • Sharpness 70 • Colour 60 SCREEN OK • Tint 0 R G • Colour Temp. 0 W C • Advanced Control : Off Screen •• Screen Prev. Auto Config. Position Size • Picture Reset • TruMotion Move Resolution ► EXTERNAL EQUIPMENT SETUP This function works in the following mode : RGB[PC]. To Set Yes No Phase Reset 1 2 3 4 5 Select PICTURE. Select Screen.
EXTERNAL EQUIPMENT SETUP Auto Configure (RGB [PC] mode only) Automatically adjusts the picture position and minimizes image instability. After adjustment, if the image is still not correct, your TV is functioning properly but needs further adjustment. PICTURE Move • Sharpness 70 • Colour 60 SCREEN OK Resolution • Tint 0 R G • Colour Temp. 0 W C • Advanced Control ► : Off Screen •• Screen Auto Config. Position Size • Picture Reset • TruMotion Prev. Move Auto Config.
EXTERNAL EQUIPMENT SETUP Selecting Resolution To view a normal picture, match the resolution of RGB mode and selection of PC mode. PICTURE Move • Sharpness 70 • Colour 60 SCREEN OK Resolution • Tint 0 R G • Colour Temp. 0 W C • Advanced Control : Off Screen •• Screen Auto Config. Position Move Prev. 1024 x 768 1280 x 768 1360 x 768 Size • Picture Reset • TruMotion ► EXTERNAL EQUIPMENT SETUP This function works in the following mode: RGB[PC] Phase Reset 1 2 3 4 Select PICTURE.
EXTERNAL EQUIPMENT SETUP Adjustment for screen Position, Size, Phase This function works in the following mode : RGB[PC]. PICTURE Move • Sharpness 70 • Colour 60 SCREEN OK Auto Config. • Tint 0 R G • Colour Temp. 0 W C 3 4 Phase ► : Off Screen •• Screen 2 Position Size • Picture Reset 1 Prev.
EXTERNAL EQUIPMENT SETUP NETWORK SETUP Wired Network Connection This TV can be connected to a local area network (LAN) via the LAN port. After making the physical connection, the TV needs to be set up for network communication. EXTERNAL EQUIPMENT SETUP 1 HDMI / DVI IN 2 1 2 1 1 Broadband Modem Broadband Service Router Broadband Modem Broadband Service 1 Connect the LAN port of the Modem or Router to the LAN port on the TV. 2 Select “Network Setting” in the NETWORK menu.
EXTERNAL EQUIPMENT SETUP Wired Network Setup NETWORK Move • Network Status Previous setting value exists. Do you want to connect with the previous setting? Network Type ► •• Network Network Setting Setting :: Wired Wired OK : Internet is connected Wired network is recommended • Legal Notice Wired OK Wireless Resetting ꔉ Next Exit IP Manual Setting IP Auto Setting Network Setting Network Setting Network Setting Select the IP setting mode.
EXTERNAL EQUIPMENT SETUP ■■ This feature requires an always-on broadband internet connection. ■■ You do not need to connect to a PC to use this function. ■■ If Network Setting is not working, check your network conditions. Check the LAN cable and make sure your router has DHCP turned on if you wish to use the Auto Setting. ■■ If the Network Setting is not completed, network may not operate normally.
EXTERNAL EQUIPMENT SETUP NOTE its sub-scription to one device, this TV may not be allowed to connect when a PC is already connected.) ► The use of a “Router” may not be allowed or its usage may be limited depending on the policies and restrictions of your ISP. For details, contact your ISP directly. ► The wireless network operates at 2.
EXTERNAL EQUIPMENT SETUP Wireless Network Connection The LG Wireless LAN for Broadband/DLNA Adaptor, allows the TV to connect to a wireless lan network. The network configuration and connection method may vary depending on the equipment in use and the network environment. Refer to the setup instructions supplied with your access point or wireless router for detailed connection steps and network settings.
EXTERNAL EQUIPMENT SETUP Wireless Network Setup Setting up the AP (Access Point) or the wireless router is required before connecting the TV to the network. Move • Network Status OK Network Type : Internet is connected Wired network is recommended • Legal Notice Wired IP Mode ● IP Address ● Subnet Mask ◄ IP Auto Setting ► 255 . 255 . 0 . 0 5 ◄ ► IPTIME iptime ASW Network1 OK OK 4 Selecting AP Page 1/1 Insert hexadecimal (0~9,A~F) 10 or 26 digits. Insert 5 or 13 ASCII characters.
EXTERNAL EQUIPMENT SETUP When a security code is already set PIN (Personal Identification Number) If you want to connect the AP (Access Point) or router with PIN, use this feature. Selecting AP Connecting with PIN mode Select AP you want to connect. Page 1/1 EXTERNAL EQUIPMENT SETUP PIN NUMBER : 12345670 iptime ASW Network1 Connect Access Point Search For more information, check the AP manual. ꔉ Next Connecting with PIN mode ꔉ Next Previous 1 2 4 5 Previous Exit Exit Repeat step 1-7 on P.21.
EXTERNAL EQUIPMENT SETUP Simple setting (WPS-button mode) If your access point or wireless router that supports PIN or WPS, it’s available to use your access point or wireless router within 120 counts. You do not need to know the access point name (SSID: Service Set Identifier) and security code of your access point or wireless router. Select the wireless network setting type. Simple setting (WPS-button mode) Press PBC mode button of AP and press ‘Connect’ button.
EXTERNAL EQUIPMENT SETUP AD-hoc Mode This is the method of communicating directly with the machine to communicate without AP. This is the same as connecting two PCs with a cross cable. EXTERNAL EQUIPMENT SETUP Select the wireless network setting type. Setting AD-hoc network Features using exiting network can be unavailable. Do you Setting from the AP list want to change network connection? Simple setting (WPS-button mode) Exit Network ID(SSID) : LGTV0 Cancel Changing the setting information.
EXTERNAL EQUIPMENT SETUP Network Status Network Setting NETWORK Move OK •• Network Network Status Status : Not connected : Internet is connected Network connecting • Legal Notice Setting Test Close Select the wireless network setting type. Network Setting Select the wireless network setting type. Select the IP setting mode. IP Mode ● IP Address ● Subnet Mask ◄ IP Auto Setting ► 255 . 255 . 0 . 0 255 . 255 . 0 . 0 ● Gateway 255 . 255 . 0 . 0 ● DNS Server 255 . 255 . 0 .
WATCHING TV / PROGRAMME CONTROL TURNING ON THE TV When your TV is turned on, you will be able to use its features. WATCHING TV / PROGRAMME CONTROL 1 Firstly, connect the power cord correctly. At this stage, the TV switches to standby mode. 2 In standby mode to turn TV on, press the / I, INPUT or P button on the TV or press the POWER, INPUT, P or NUMBER button on the remote control and the TV will switch on.
WATCHING TV / PROGRAMME CONTROL QUICK MENU Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual. Q.Menu (Quick Menu) is a menu of features which users might use frequently. ◄ Aspect Ratio Audio Language : Selects the sound output. Sleep Timer : Sets the sleep timer. Skip Off/On : Selects the Skip Off/On. USB Device : Selects “Eject” in order to eject USB device. ► WATCHING TV / PROGRAMME CONTROL Aspect Ratio: Selects your desired picture format.
WATCHING TV / PROGRAMME CONTROL ON SCREEN MENUS SELECTION AND ADJUSTMENT Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual. 1 2 WATCHING TV / PROGRAMME CONTROL • Press the RED button, you can check the Customer Support menu. • Press the GREEN button, you can check the Simple Manual menu. • Press the MENU/EXIT button to return to normal TV viewing. • Press the BACK button to move to the previous menu screen. Display each menu. Select a menu item.
WATCHING TV / PROGRAMME CONTROL LOCK ● Set LOCK Move OPTION OK Password ● Lock System : Off : HongKong ):Off ● Set :1 : Home Use ● Programme ● Input Block Lock OK Country/Area Hard of Hearing( ● Power Indicator ● MHEG Guide ● Factory Reset ● OPTION ● Block ● Key Move ● Language(Language) : Off ID ● Mode ● IR Setting :Off Blaster NETWORK Move Input List OK Move OK • Network Setting : Wired NETWORK • Network Status : Internet is connected INPUT Antenna • Legal Notice Cabl
WATCHING TV / PROGRAMME CONTROL AUTO PROGRAMME TUNING Use this to automatically find and store all available programmes. When you start auto programming, all previously stored service information will be deleted. The maximum number of programmes that can be stored is 500. But the number may be different which depends on broadcasting signals.
WATCHING TV / PROGRAMME CONTROL MANUAL PROGRAMME TUNING (IN DIGITAL MODE) Manual Tuning lets you manually add a programme to your programme list. ◄ SETUP ● Auto Move OK Tuning ● Booster Frequency(kHz) 474000 ► ● Programme 30 ► ● Manual Tuning ► DTV UHF CH. Edit ● Signal Strength : Off ● Signal Quality 50% 50% Add Close 1 2 3 Select SETUP. •U se NUMBER buttons to input a 4-digit password in Lock System ‘On’. Select Manual Tuning. WATCHING TV / PROGRAMME CONTROL Move Select DTV.
WATCHING TV / PROGRAMME CONTROL MANUAL PROGRAMME TUNING (IN ANALOGUE MODE) Manual Tuning lets you manually tune and arrange the stations in whatever order you desire. ◄ SETUP ● Auto Move OK ● System Tuning ● Band WATCHING TV / PROGRAMME CONTROL ● Booster Edit : Off 1 2 3 4 5 I ● System ● Fine ◄► ● Search ◄► Select Manual Tuning. Cable TV DK ● Band V/UHF ● Channel 1 ● Fine ◄► ● Search ◄► ● Name C 01 Store Store Close 7 Select TV or Cable TV.
WATCHING TV / PROGRAMME CONTROL ◄ SETUP ● Auto Move OK ● System Tuning ● Band ● Booster ► ● Programme ► ● Manual Tuning Edit : Off ► TV ● Storage ● Storage I ● System V/UHF ● Channel 0 ● Fine ◄► ● Search ◄► ● Name ◄ 1 C 01 or Cable TV ► 1 DK ● Band V/UHF ● Channel 1 ● Fine ◄► ● Search ◄► ● Name C 01 Store Store Close Close You can assign a station name with five characters to each programme number. 1 2 3 4 Select SETUP. 5 Select Manual Tuning.
WATCHING TV / PROGRAMME CONTROL PROGRAMME EDIT When a programme number is skipped, it means that you will be unable to select it using P during TV viewing. button If you wish to select the skipped programme, directly enter the programme number with the NUMBER buttons or select it in the Programme edit menu. This function enables you to skip the stored programmes.
WATCHING TV / PROGRAMME CONTROL IN DTV/RADIO MODE ■ Skipping a programme number 1 Select a programme number to be skipped. 2 BLUE Turn the programme number to blue. 3 BLUE Release. • When programmes are to be skipped, the skipped programme shows in blue and these programmes will not be selected by the P buttons during TV viewing. • If you wish to select a skipped programme, directly enter the programme number with the NUMBER buttons or select it in the programme edit or EPG.
WATCHING TV / PROGRAMME CONTROL ■ Skipping a programme number 1 Select a programme number to be skipped. 2 BLUE Turn the programme number to blue. 3 BLUE Release. • When a programme number is skipped it means that you will be unable to select it using the P button during normal TV viewing. • If you wish to select a skipped programme, directly enter the programme number with the NUMBER buttons or select it in the programme edit or EPG.
WATCHING TV / PROGRAMME CONTROL BOOSTER(IN AIR DIGITAL MODE) If reception is poor select Booster to On. When the signal is strong, select "Off". ● Programme Edit Tuning ● Programme On :: On OK Tuning ● Manual ► Booster ●●Booster ●●Booster Booster Edit Off : :On On On Select SETUP. 2 Select Booster. 3 4 ● Auto Tuning Move ► Tuning ● Manual 1 SETUP OK ► ● Auto Move WATCHING TV / PROGRAMME CONTROL SETUP Select On or Off. Save.
WATCHING TV / PROGRAMME CONTROL SOFTWARE UPDATE You can update the TV with the latest software to enhance the product operation and/or add new features. You can update the software by connecting the TV directly to the software update server. The Software Update function may not work properly depending on your internet environment. In this case, you can obtain the latest software from the authorized LG Electronics Service Center then update your TV.
WATCHING TV / PROGRAMME CONTROL ■■When setting “Software Update” Occasionally, a transmission of updated digital software information will result in the following menu on the TV screen. ? Software update is available. Would you like to download now? No Simple Update : for current update stream ? A new software update is available at 00/00/0 00:00. Do you want to update the software when available? Software Update A window as display below appears when download completes.
WATCHING TV / PROGRAMME CONTROL PICTURE/SOUND TEST This function is a customer support function that can execute picture and sound tests. WATCHING TV / PROGRAMME CONTROL Software Update SETUP PICTURE AUDIO TIME LOCK Picture Test Sound Test ? Do you have a problem in this test screen? Signal Test Product/Service Info. OPTION NETWORK Press OK( INPUT 2 3 GAME Yes No Network Test Close ) to set programme settings.
WATCHING TV / PROGRAMME CONTROL SIGNAL TEST This function enables you to view information on the Manufacturer, Model/Type and Software Version. Engineering Diagnostics Software Update SETUP PICTURE AUDIO TIME LOCK Picture Test Manufacturer : LG Electronics Inc. Model/Type : Software Version : V00.00.01 Sound Test Signal Signal Test Test Product/Service Info. OPTION NETWORK Press OK( INPUT MY MEDIA GAME Close ) to set programme settings.
WATCHING TV / PROGRAMME CONTROL PRODUCT/SERVICE INFORMATION This function is a customer support function that can see product/service information and customer service center information. Software Update Product/Service Info. Picture Test SETUP PICTURE AUDIO TIME LOCK Sound Test Signal Test Product/Service Info. WATCHING TV / PROGRAMME CONTROL Network Test OPTION NETWORK INPUT MY MEDIA GAME - MODEL/TYPE : - Software version : 00.00.
WATCHING TV / PROGRAMME CONTROL SIMPLE MANUAL You can easily and effectively access the TV information by viewing a simple manual on the TV. During the Simple Manual operation, audio will be muted. PICTURE AUDIO TIME LOCK OPTION NETWORK INPUT MY MEDIA GAME Press OK( ) to set programme settings. Customer Support 1 2 Simple Manual Exit GREEN Select Simple Manual. WATCHING TV / PROGRAMME CONTROL SETUP Select the part of the manual you want to see.
WATCHING TV / PROGRAMME CONTROL SELECTING THE PROGRAMME LIST You can check which programmes are stored in the memory by displaying the programme list. Programme List 1 BBC ► Displayed when the Locked Programme. Exit ► Mini Glossary 2 BBC 3 BBC WATCHING TV / PROGRAMME CONTROL 4 BBC 5 BBC A Pr.Edit ■■Displaying programme LIST 1 Display the Programme List. •Y ou may find some blue programmes. These have been set up to be skipped in the programme edit mode.
WATCHING TV / PROGRAMME CONTROL ■■Paging through a programme list 1 Turn the pages. 2 Return to normal TV viewing. WATCHING TV / PROGRAMME CONTROL ■■ Displaying the favourite programme list Exit Favourite List ◄ ►Favourite Pr. Group ◄ Group B ► ► 1 BBC ► 2 BBC 3 BBC Pr.Reg. 1 Pr.Edit BLUE Turn the programme edit. YELLOW Current channel is registered/ cancelled as preferred channel on currently selected Group. Display the Favourite Programme List. Favourite group is changed.
WATCHING TV / PROGRAMME CONTROL INPUT LIST HDMI and AV1 can be recognized by a detect pin and thus enabled only when an external device approves voltage. By using TV/RAD button, you can move from External Input to RF Input and to the last watched programme in DTV/RADIO/TV mode. WATCHING TV / PROGRAMME CONTROL 46 Input List Antenna Move Cable Component 1 Component 2 USB1 USB2 AV1 RGB HDMI1 HDMI2 Input Label 1 Select the input source.
WATCHING TV / PROGRAMME CONTROL INPUT LABEL Selects a label for each input source. Input Label Input List Cable Component 1 Component 2 USB1 USB2 AV1 RGB HDMI1 HDMI2 Input Label OK AV2 HDMI3 Exit AV1 ◄ ► AV2 ◄ ► Component 1 ◄ ► Component 2 ◄ ► RGB ◄ ► ▼ Close 1 2 3 BLUE Select Input Label. Select the source. WATCHING TV / PROGRAMME CONTROL Antenna Move Select the label. • Press the EXIT button to return to normal viewing.
WATCHING TV / PROGRAMME CONTROL SIMPLINK This function operates only with devices with the SIMPLINK logo. Please check the SIMPLINK logo. This TV might not function properly when using it with other products with HDMI-CEC function. This allows you to control and play other AV devices connected to the display through HDMI cable without additional cables and settings. WATCHING TV / PROGRAMME CONTROL If you do not want SIMPLINK menu,select “Off”.
WATCHING TV / PROGRAMME CONTROL Connecting to Home Theater with the SIMPLINK logo. 1 HDMI / DVI IN 2 2 Connect the Digital Audio output terminal on the back of the TV and the Digital Audio input terminal of the Home Theater using optical cables. 3 Select Home Theater in the Speaker menu by pushing the SIMPLINK button. ►► When you select or operate a media device with home theater function, the speaker automatically switches to home theater speaker (HT speaker).
WATCHING TV / PROGRAMME CONTROL SIMPLINK Functions WATCHING TV / PROGRAMME CONTROL Disc playback Control connected AV devices by pressing the , OK, ►, ▀, l l, ◄◄ and ►► buttons. Direct Play After connecting AV devices to the TV, you can directly control the devices and play media without additional settings. Select AV device Enables you to select one of the AV devices connected to the TV and operate it. Power off all devices When you switch off the TV, all connected devices are turned off.
WATCHING TV / PROGRAMME CONTROL AV MODE You can select the optimal images and sounds . Off Cinema Sport Game Off Cinema Game Sport WATCHING TV / PROGRAMME CONTROL 1 Disables the AV MODE. Optimizes video and audio for watching movies. Optimizes video and audio for watching sports events. Optimizes video and audio for playing games. Press the AV MODE button repeatedly to select the desired source.
WATCHING TV / PROGRAMME CONTROL INITIALIZING(RESET TO ORIGINAL FACTORY SETTINGS) This function initializes all settings. But the settings of Day and Night of the Picture Mode cannot be initialized. It is useful to initialize the product or when you move to other city or country. When the Factory Reset is completed, you must restart the Initializing setup. OPTION Move ● Country/Area : HongKong ● Country/Area : HongKong ● Hard ):Off ● Hard ):Off All user settings and channel settings will be reset.
NETCAST LEGAL NOTICE Legal Notice 01/03 page NETWORK Move OK • Network Setting : Wired Legal Notice Notice •• Legal : Internet is connected ► • Network Status ▼ Close 1 2 3 NETCAST IMPORTANT NOTICE RELATING TO NETWORK SERVICE All content and services accessible through this device belong to third parties and are protected by copyright, patent, trademark and/or other intellectual property laws. Such content and services are provided solely for your personal noncommercial use.
NETCAST IMPORTANT NOTICE RELATING TO NETWORK SERVICES SERVICE NETCAST 54 All content and services accessible through this device belong to third parties and are protected by copyright, patent, trademark and/or other intellectual property laws. Such content and services are provided solely for your personal noncommercial use. You may not use any content or services in a manner that has not been authorized by the content owner or service provider.
NETCAST NETCAST MENU These services are provided by separate Content Provider. Please visit the content providers web site for specific information on their services. (But, some content manual maybe not provide depending on Content Provider). NetCast menu source can differ by country. 1 2 Picasa NETCAST Accu YouTube Weather Select NETCAST menu option. Enjoy the AccuWeather, Picasa or YouTube. NOTE ► The videos list searched from the TV may different with the list searched from a web browser on PC.
NETCAST YOUTUBE YouTube is a video sharing website where users can upload, view, and share video clips. YouTube Screen Components 1 NETCAST 2 YouTube menu Videos list 1 2 RED Set the option menu. Return to Netcast menu. Return to TV viewing. NOTE ►►When you press the Q.menu button while the Youtube video is playing in full mode, you can set the video options.
NETCAST YouTube Service menu ● ● ● ● ● ● NETCAST Home: You can watch the popular video in real time. Featured: The featured videos list will be displayed. Popular: The best rated videos list from YouTube server will be displayed. Most Viewed: The most viewed videos list will be displayed. Search: The keypad/keyboard menu will be displayed. History: The videos list that you previously played will be displayed. Maximum of 20 videos can be stored.
NETCAST ACCUWEATHER Accuweather is the program to view the weather of the city the user wants. AccuWeather Screen Components 1 2 NETCAST 3 AccuWeather menu Weather list by city Corresponding buttons on the remote control 1 2 3 RED Change between Celsius and Fahrenheit. Move the focus to the menu you want. Select the focused menu. Return to Netcast menu. Return to TV viewing. AccuWeather Service menu ● Home: The weather of selected city is displayed.
NETCAST PICASA Picasa is an application from Google that appreciates digital image files. Picasa Screen Components 1 3 1 NETCAST 2 Picasa menu Photos list Corresponding buttons on the remote control 2 3 Select the desired photo. The selected photo file is displayed. Return to Netcast menu. Return to TV viewing. Picasa Service menu ● Home: The featured photos list will be displayed. ● Friends: You can register users with the pictures you want as friends. You can add up to 10 friends.
TO USE A USB DEVICE WHEN CONNECTING A USB DEVICE When you connect a USB device, this pop up menu is displayed, automatically. When the Pop Up menu appears, you can select Music List, Photo List or Movie List in the MY MEDIA menu. In USB device, you can not add a new folder or delete the existing folder. After choosing the desired type of media, choose a device to open files from. The options are: USB device or DLNA. 1 Connect the USB device to the USB IN 1 or USB IN 2 jack on the TV.
TO USE A USB DEVICE Precautions when using the USB device TO USE A USB DEVICE ►►Only a USB storage device is recognizable. ►►If the USB storage device is connected through a USB hub, the device is not recognizable. ►►A USB storage device using an automatic recognition programme may not be recognized. ►►A USB storage device which uses its own driver may not be recognized. ►►The recognition speed of a USB storage device may depend on each device.
TO USE A USB DEVICE DLNA About DLNA This TV is a DLNA Certified digital media product that can display and play movie, photo and music content from your DLNA Certified network device and DLNA server. The Digital Living Network Alliance (DLNA) is a cross-industry organization of consumer electronics, computing industry and mobile device companies. Digital Living provides consumers with easy sharing of digital media through a wired or wireless network in the home.
TO USE A USB DEVICE Installing Nero MediaHome 4 Essentials Nero MediaHome 4 Essentials is easy to use DLNA server software for Windows. If you are already using DLNA server software on your PC, Nero MediaHome is not required. Nero MediaHome is not required for Windows 7 since it has a built-in DLNA server. 1 Start up your computer, and insert the Nero MediaHome 4 Essentials CD-ROM into your computer’s CD-ROM drive.
TO USE A USB DEVICE Sharing files and folders After installing Nero MediaHome, you must add folders you wish to share. TO USE A USB DEVICE 64 1 Double-click the Nero MediaHome 4 Essentials icon on the desktop. 2 Click Network icon on the left and define your network name in the Network name field. The Network name you enter will be recognized by your TV. 3 Click Shares icon on the left. 4 Click Local Folders tab on the Shared screen. 5 Click Add icon to open the Browse Folder window.
TO USE A USB DEVICE Playing back shared contents You can display and play movie, photo and music content stored on your computer or other DLNA media servers. 1 Start the server on your computer or other device that connected on your home network. 2 Select MY MEDIA. 3 Select Movie List, Photo List or Music List. Select the DLNA. Depending on the media server, this TV may need to get the permission from the server. If you want to re-scan available media server, press blue colour button.
TO USE A USB DEVICE MOVIE LIST You can play movie files on a USB storage device. The movie list is activated once USB is detected. It is used when playing movie files on TV. Displays the movies in the USB folder and supports Play. Allows playback of all movies in the folder and user desired files. It is a movie list that displays folder information and movie file. The On Screen Display may be different from your TV. Images are an example to assist with the TV operation. Movie(*.mpg/*.mpeg/*.dat/*.ts/*.
TO USE A USB DEVICE Supported DivX file File Extensions .asf .wmv .wma A/V Video Audio Codec Profile/Level Support VC-1 Advanced Profile Advanced Profile@Level 3 (e.g. 720p60, 1080i60, 1080p30) Only streams compliant to SMPTE 421M VC-1 VC-1 Simple and Main Simple Profile@Medium Level (e.g. CIF, QVGA) standard are supported. Profiles Main Profile@High Level (e.g. 1080p30) WMA Standard WMA 9 Professional DivX3.11 DivX4 DivX5 DivX6 .divx .avi Video Video H.264 / AVC Main Profile@ Level 4.
TO USE A USB DEVICE Screen Components You can also adjust USB in the INPUT menu. 1 Select MY MEDIA. 2 Select Movie List. 2 1 1 2 3 4 5 TO USE A USB DEVICE 68 Moves to upper level folder Current page/Total pages Corresponding buttons on the remote control Contents under the folder focused on 1 Current page/ total pages of contents under the folder focused on 1 Page 1/1 Movie List Drive1 USB1 External 1.
TO USE A USB DEVICE Movie Selection ■■When playing movie files Page 1/1 Movie List Drive1 USB1 External Page 1/1 1. EMF 10_1_Top100 20090711 MV TS 051. Apple_ ...... 02:30:25 Move Change Device Select the target folder or drive. 2 Change Numbers Play P Mark Mode • Use the P movie page. Page Change MARK Mark Exit button to navigation in the Select the desired movie title. 3 Movie files are played.
TO USE A USB DEVICE ■■When selected movie files are played Page 1/1 Movie List Mark Mode Drive1 USB1 External Page 1/1 1. EMF 10_1_Top100 20090711 MV TS 051. Apple_ ...... 02:30:25 FHD Move Play Marked TO USE A USB DEVICE 1 Page Change Exit Mark Mode MARK Mark Exit • When one or more movie files are marked, the marked movies will be played in sequence. Select the desired movie title. BLUE or 4 5 Unmark All P Select the target folder or drive.
TO USE A USB DEVICE Using the remote control RED Play the selected movie file. Once a movie file finishes playing, the next selected one will be played automatically. GREEN Mark all movie files on the screen. YELLOW Deselect all marked movie files. BLUE Exit the Mark Mode. EXIT Return to normal viewing. ►If ► you select “Yes” from OSD when playing the same file after the movie file has been stopped, it will restart where it stopped previously.
TO USE A USB DEVICE Using the Movie List function, play Choose options. Set Video Play. Set Video. Set Audio. ■ TO USE A USB DEVICE 1 2 Close ◄► ► II ► or 01:02:30 / 02:30:25 ◄◄ ►► Q.MENU Option Hide Exit Show the Option menu. Select Set Video Play., Set Video. or Set Audio.. NOTE ►►Option values changed in Movie List does not affect Photo List and Music List. ►►Option value changed in Photo List and Music List are changed likewise in Photo List and Music List excluding Movie List.
TO USE A USB DEVICE Using the remote control ■ ► Stop the playing movie file. Press the PLAY(►) button to return to normal playback. During playback, press the Pause(II) button. ■■ Still screen is displayed. ■■ If no buttons are pressed on the remote control for 10 minutes after pausing, the TV returns to the playback state. ■■ Press the Pause(II) button and then use the FF(►►) button for slow motion.
TO USE A USB DEVICE ■■When you select the Set Video Play, Set Video Play. Picture Size ◄ Full ► Audio Language ◄ 1 ► Subtitle ◄ On ► ● Language ◄ English ► ● Code page ◄ Default ► ● Sync ◄ 0 ► ● Position ◄ 0 ► ● Size ◄ Normal ► Repeat ◄ On ► Previous 1 TO USE A USB DEVICE 2 Select Picture Size, Audio Language, Subtitle or Repeat. Make appropriate adjustments.
TO USE A USB DEVICE ■■When you select the Set Video, Set Video. Picture Mode ◄ Standard ► ● Backlight 70 ◄ ● Contrast 100 ◄ ● Brightness 50 ◄ ► ● Colour 60 ◄ ► ► ● Dynamic Contrast ◄ ● Edge Enhancer ● Noise Reduction TruMotion Picture Reset ► ◄ High ► ◄ Medium ► ◄ Low ► Previous Select Picture Mode or TruMotion. 2 Make appropriate adjustments. ■ When you select the Set Audio, Set Audio.
TO USE A USB DEVICE PHOTO LIST You can view photo files on USB storage device. The On Screen Display may be different from your TV. Images are an example to assist with the TV operation. When you are watching the photo by the Photo List function, you can not change the picture mode. PHOTO(*.JPEG) supporting file Baseline : 64 x 64 to 15360 x 8640 Progressive : 64 x 64 to 1920 x 1440 • You can play JPEG files only. • Non-supported files are displayed in the form of predefined icon.
TO USE A USB DEVICE Photo Selection ■■When playing photo files Page 1/1 Photo List Drive1 USB1 External 1. EMF Ental 10_1_Top 100 2009_5_3_TOP... FHD 20090711 HD MV Page 1/1 20090810 200942_Top100 Photo Select the target folder or drive. 2 Change Numbers View P Page Change Mark Mode MARK Mark Exit • Use the P photo page. button to navigation in the Select the desired photos. 3 Photo files are displayed.
TO USE A USB DEVICE ■■When selected photo files are displayed Page 1/1 Photo List Mark Mode Drive1 USB1 External 1. EMF Ental 10_1_Top 100 FHD 2009_5_3_TOP... HD 20090711 Page 1/1 20090810 MV 200942_Top100 Photo 1 P Page Change Exit Mark Mode TO USE A USB DEVICE BLUE or Convert to Mark Mode. Mark desired photo file. RED Marked photo file is displayed. Using the remote control RED 78 Display the selected photo file. GREEN Mark all photo files on the screen.
TO USE A USB DEVICE How to view photo Detailed operations are available on full-sized photo view screen. Page 1/1 Photo List Drive1 USB1 External 1. EMF 10_1_Top 100 Ental 2009_5_3_TOP... FHD HD 20090711 Page 1/1 20090810 MV 200942_Top100 Photo To Music List 2.DVDRip.AC... Basic Test Kit TS Move Change Device 20091010 View P Mark Mode Change Numbers Page Change MARK Mark Exit ◄ ► The aspect ratio of a photo may change the size of the photo displayed on the screen in full size.
TO USE A USB DEVICE 01_a.jpg 2008/12/10 1920 x 1080 479 KB 4 ◄ Slideshow ► BGM ■ 2/13 • Use ► Q.MENU Option Hide Exit TO USE A USB DEVICE ►►Slideshow : When no picture is selected, all photos in the current folder are displayed during slide show. If some photos are selected, those photos are displayed in a slide show. ■ Set the time interval of the slide show in Option. ►►BGM (Background Music) : Listen to music while viewing photos in full size.
TO USE A USB DEVICE Using the Photo List function 01_a.jpg 2008/12/10 1920 x 1080 479 KB Choose options. ◄ ► Set Photo View. Set Video. Set Audio. Close ◄ Slideshow 2 or BGM ■ 2/13 ► Q.MENU Option Hide Exit Show the Option menu. Select Set Photo View., Set Video. or Set Audio.. NOTE ►►Option values changed in Movie List does not affect Photo List and Music List. ►►Option value changed in Photo List and Music List are changed likewise in Photo List and Music List excluding Movie List.
TO USE A USB DEVICE ■■When you select the Set Photo View, Set Photo View. Slide Speed Fast ◄ BGM 1 ► 2009_5_3_TOP100+(_... ● Repeat ◄ On ► ● Random ◄ Off ► 2 Select Slide Speed or BGM. Make appropriate adjustments. Previous ■ When you select the Set Video, Set Video.
TO USE A USB DEVICE MUSIC LIST You can play music files on USB storage device. Purchased music files(*.MP3) may contain copyright restrictions. Playback of these files may not be supported by this model. Music file on your USB device can be played by this unit. The On Screen Display may be different from your TV. Images are an example to assist with the TV operation. MUSIC (*.MP3) supporting file Bit rate 32 to 320 • Sampling rate MPEG1 Layer3 : 32 kHz, 44.
TO USE A USB DEVICE Music Selection Page 1/1 Music List Drive1 USB1 External 001. - Diet(feat.).mp3 00:00 Page 1/1 002. -Mad(Feat.).mp3 00:00 003. 2NE1 - Fire.mp3 00:00 004. - Melody.mp3 00:00 005. - Gift.mp3 00:00 Move Change Device To Movie List Change Numbers ■■When playing music files TO USE A USB DEVICE 1 P Page Change Mark Mode MARK Mark Exit • Use the P button to navigate up/down in the music page. Select the target folder or drive. 2 Select the desired music title.
TO USE A USB DEVICE ■■When selected music files are played Page 1/1 Music List Mark Mode Drive1 USB1 External 001. - Diet(feat.).mp3 00:00 Page 1/1 002. -Mad(Feat.).mp3 00:00 003. 2NE1 - Fire.mp3 00:00 004. - Melody.mp3 00:00 005. - Gift.mp3 00:00 Move Play Marked 1 BLUE or Convert to Mark Mode. Mark desired music file. RED P Page Change Exit Mark Mode MARK Mark Exit • When one or more music files are marked, the marked music title will be played in sequence.
TO USE A USB DEVICE Using the Music List function, play Page 1/1 Music List 3 file(s) Marked Drive1 USB1 External Page 1/1 Set Audio Play. ► 004. - Diet (feat).mp3 00:00 ■ 1 TO USE A USB DEVICE 86 2 ► II ◄◄ ►► or Set Audio. 005. - Mad (Feat).mp3 00:00 005. - Mad (Feat).mp3 ► Choose options. 006. - Melody.mp3 00:00 ◄► Play with Photo 007. - Melody.mp3 00:00 008. - Melody.mp3 00:00 Close 02:30 / 03:25 Q.MENU Option Hide Exit Show the Option menu. Select Set Audio Play.
TO USE A USB DEVICE Using the remote control ■ ► II ◄◄ / ►► Stop the playing music file. Press the PLAY(►) button to return to normal playback. When you press the Pause(II) button while playing the file, the playback will be paused. When you press the Pause(II) button again while the playback is paused, it will resume the playback. When playing, When you press the REW(◄◄) button, the previous music file will be played. When you press the FF(►►) button, the next music file will be played.
TO USE A USB DEVICE ■■When you select the Set Audio Play, 1 Set Audio Play. Repeat ◄ On ► Random ◄ Off ► 2 Previous Select Repeat or Random. Make appropriate adjustments. ■ When you select the Set Audio, Set Audio. Sound Mode ◄ Standard ► Auto Volume ◄ Off ► Clear Voice II ◄ Off ► Balance 0 ◄ L R ► 1 2 Select Sound Mode, Auto Volume, Clear Voice II or Balance. Make appropriate adjustments.
TO USE A USB DEVICE DIVX REGISTRATION CODE Confirm the DivX registration code number of the TV. Using the registration number, movies can be rented or purchased at www.divx.com/vod. With a DivX registration code from other TV, playback of rented or purchased DivX file is not allowed. (Only DivX files matched with the registration code of the purchased TV are playable.) MY MEDIA DivX Reg. Code Deactivation Movie List Press OK( Photo List ) to see photos from the USB.
TO USE A USB DEVICE DEACTIVATION The purpose of deactivation is to allow deactivation of devices for users who have activated all the available devices through the web_server and are blocked from activating more devices. DivX VOD allowed the consumer to activate up to 6 devices under one account, but to replace or deactivate any of those devices, the consumer had to contact DivX Support and request deletion.
GAME GAME Allows you to enjoy the games installed on the TV. Game SETUP PICTURE AUDIO TIME LOCK JUMP OPTION NETWORK INPUT MY MEDIA GAME HOLE IN ONE SAVING CRYSTAL INVADER WHACK A MOLE SUDOKU COOKING BURGER URGENT SURVIVAL Exit Press OK( ) to set programme settings. 1 2 3 Simple Manual Exit GAME Customer Support Select GAME. Select the desired game. Enter the selected game mode. • Press the EXIT button to return to normal viewing.
EPG(ELECTRONIC PROGRAMME GUIDE) (IN DIGITAL MODE) This system has an Electronic Programme Guide (EPG) to help your navigation through all the possible viewing options. The EPG supplies information such as programme listings, start and end times for all available services. In addition, detailed information about the programme is often available in the EPG (the availability and amount of these programme details will vary, depending on the particular broadcaster).
EPG (ELECTRONIC PROGRAMME GUIDE) Switch on/off EPG 1 Switch on or off EPG. Select a programme 1 or Select desired programme. 2 The EPG will disappear after moving to a selected program. Button Function in NOW/NEXT Guide Mode You can view a program being broadcasted and one scheduled to follow. Change EPG mode. Programme Guide ▲ That ’70s show Nov. 25, 2008 10:05 1 YLE TV1 25 Nov. 2008 09:45~10:15 YELLOW Enter Manual Timer mode. ALL NOW 1 YLE TV1 2 YLE TV2 BLUE Enter Schedule List mode.
EPG (ELECTRONIC PROGRAMME GUIDE) Button Function in 8 Day Guide Mode Programme Guide ▲ That ’70s show Change EPG mode. ALL 15:00 ▼ Kungskonsumente Antigues Roadshow The Drum Mint Extra TV2: Farmen The Drum You Call The Hits Fashion Essentials ... ... ... Tänään otsikoissa 2 YLE TV2 Enter Date setting mode. 4 TV.. 5 YLE FST 6 CNN YELLOW 8 YLE24 Enter Manual Timer mode. FAV Favourite BLUE Enter Schedule List mode.
EPG (ELECTRONIC PROGRAMME GUIDE) Button Function in Date Change Mode Change to the selected date. Programme Guide ▲ That ’70s show Nov. 25, 2008 10:05 1 YLE TV1 25 Nov. 2008 09:45~10:15 ◄ ALL 4 TV.. 5 YLE FST 6 CNN 8 YLE24 Switch off Date setting mode. 15:00 ▼ 2 YLE TV2 Select a date. Tue. 25 Nov. 14:00 1 YLE TV1 ... ◄ GREEN Switch off Date setting mode. Kungskonsumente Antigues Roadshow The Drum Mint Extra TV2: Farmen The Drum You Call The Hits Fashion Essentials ... ... ...
EPG (ELECTRONIC PROGRAMME GUIDE) Button Function in Remind Setting Mode Sets only a start time for the reminder with the end time grayed out. Manual Timer Switch off Manual Timer mode. Select the date to schedule. Sun. Select Start Time, End time or Programme. Mon. Tue. Wed., Aug. 12 2009 13:46 Wed. Thu. Select 10 the date 11 to remind 12 09 16 17 Time18 Start Fri. 13 End19Time 14 Sat. Wed. 12 Aug. 2009 15 20 21 Programme 22 DTV 27 801 ANTV 28D...
PICTURE CONTROL PICTURE SIZE (ASPECT RATIO) CONTROL You can watch the screen in various picture formats; 16:9, Just Scan, Original, Full Wide, 4:3, 14:9, Zoom and Cinema Zoom. If a fixed image is displayed on the screen for a long time, that fixed image may become imprinted on the screen and remain visible. You can adjust the enlarge proportion using button. This function works in the following signal. 1 2 Select Aspect Ratio. •Y ou can also adjust Aspect Ratio in the PICTURE menu.
PICTURE CONTROL • 4:3 The following selection will allow you to view a picture with an original 4:3 aspect ratio. • 14:9 You can view a picture format of 14:9 or a general TV programme in the 14:9 mode. The 14:9 screen is viewed in the same way as in 4:3, but is moved to the up and down. • Zoom The following selection will allow you to view the picture without any alteration, while filling the entire screen. However, the top and bottom of the picture will be cropped.
PICTURE CONTROL PICTURE WIZARD This feature lets you adjust the picture quality of the original image. Use this to calibrate the screen quality by adjusting the Black and White Level etc. General users can calibrate the screen quality by easily following each stage. When you adjust the image to Low, Recommended or High, you can see the changed result as an example. In RGB-PC/HDMI-PC/DVI-PC mode, the changed Colour, Tint and H/V Sharpness values are not applied.
PICTURE CONTROL ENERGY SAVING It reduces the TV’s power consumption. The default factory setting is adjusted to the comfortable level to be viewed at home. You can increase the brightness of your screen by adjusting the Energy Saving level or by setting the Picture Mode. When adjusting Energy Saving in MHEG mode, the Energy Saving setting is applied after MHEG is finished. Selecting ‘Screen Off’ while tuned to a radio station channel will reduce power consumption.
PICTURE CONTROL PRESET PICTURE SETTINGS Picture Mode-Preset Vivid Standard Cinema Strengthen the contrast, brightness, colour and sharpness for vivid picture. The most general screen display status. Optimizes video for watching movies. Sport Game Optimizes video for watching sports events. Optimizes video for playing games.
PiCture Control manual PiCture adjuStment Picture mode-user option Backlight To control the brightness of the screen, adjust the brightness of LCD panel. Adjusting the backlight when setting the brightness of the set is recommended. Contrast Adjusts the signal level between black and white in the picture. You may use Contrast when the bright part of the picture is saturated. Brightness Adjusts the base level of the signal in the picture.
PICTURE CONTROL PICTURE IMPROVEMENT TECHNOLOGY You can calibrate the screen for each Picture Mode or set the video value according to the special video screen. You can set the video value differently for each input. To reset to the factory default screen after making adjustments to each video mode, execute the “Picture Reset” function for each Picture Mode. PICTURE Move • Sharpness 70 • Colour 60 PICTURE OK 0 R G 0 W C ► • Advanced Advanced Control Control ► • Tint • Colour Temp.
PICTURE CONTROL EXPERT PICTURE CONTROL By segmenting categories, Expert1 and Expert2 provide more categories which users can set as they see fit, offering the optimal picture quality for users. This may also be used to help a professional optimize the TV performance using specific videos.
picture control *This feature is not available for all models. Dynamic Contrast (Off/Low/Medium/High) Dynamic Colour (Off/Low/High ) ■■ Adjusts the contrast to keep it at the best level according to the brightness of the screen. The picture is improved by making bright parts brighter and dark parts darker. ■■ Adjusts screen colours so that they look livelier, richer and clearer. This feature enhances hue, saturation and luminance so that red, blue, green and white look more vivid.
PICTURE CONTROL Colour Gamut (Advanced Control ) (Wide/Standard) Colour Gamut ( Expert Control : EBU/SMPTE/BT709/ Wide/Standard) Edge Enhancer (Off/Low/High) • Standard : Mode to use original colour area regardless of the display char- acteristics. • Wide: Mode to use maximum colour area of the TV display. • Standard : Mode to use original colour area regardless of the display characteristics. • Wide : Mode to use maximum colour area of the TV display. • EBU : Mode to display EBU colour area.
PICTURE CONTROL PICTURE RESET Settings of the selected picture modes return to the default factory settings. PICTURE Move • Sharpness 70 • Colour 60 PICTURE OK • Tint 0 R G • Colour Temp. 0 W C : Off • Screen 1 3 4 60 OK ► • Advanced Control • TruMotion Yes No : Off • Screen Select PICTURE. PICTURE CONTROL 2 • Colour •• Picture Picture Reset Reset ► • TruMotion 70 • Tint ? All picture 0 Rsettings willG be reset. C • Colour Temp.
PICTURE CONTROL TRUMOTION It is used for the best picture quality without any motion blur or judder when you enter a quick image or Film Source. High : Provide smoother picture movement. Low : Provide smooth picture movement. Use this setting for standard use. Off : Turn off TruMotion Operation. User : User can adjust Judder and Blur level in TruMotion Operation, separately. - Judder : Adjust noise of the screen. - Blur : Adjust after-image of the screen. This feature is disable in RGB-PC,HDMI-PC mode.
PICTURE CONTROL POWER INDICATOR It helps you adjust the brightness of moving LED when power is turned on. Standby Light Determines whether to set the indicator light on the front of the TV to On or Off in standby mode. Power Light Determines whether to set the indicator light on the front of the TV to On or Off when the power turns on.
PICTURE CONTROL MHEG GUIDE This menu determines whether to show the UI guide or the guide provided by MHEG when a user hits the 'GUIDE' key. If you set the 'MHEG Guide' menu to On, the 'Digital Teletext' sent by broadcasters will be used. Note that 'Digital Teletext' is not always present. : HongKong ● Country/Area : HongKong ● Hard ):Off ● Hard ):Off of Hearing( Indicator ● Set : Home Use • Mode Setting Select OPTION. PICTURE CONTROL Select MHEG Guide.
PICTURE CONTROL MODE SETTING We recommend setting the TV to “Home Use ” mode for the best picture in your home environment. “Store Demo ” mode is an optimal setting for displaying at stores.
PICTURE CONTROL DEMO MODE Display the slide show to explain the various logo of this TV. It is not possible to use Demo Mode in Home Use mode. In Store Demo, Demo Mode is automatically set to On. Once Demo Mode is set to Off in Store Demo, Demo Mode does not run and only the screen is reset. The screen is reset automatically after 5 minutes in Demo Mode.
SOUND & LANGUAGE CONTROL AUTO VOLUME L EVELER Auto Volume automatically remains on the same level of volume if you change programmes. Because each broadcasting station has its own signal conditions, volume adjustment may be needed every time the channel is changed. This feature allows users to enjoy stable volume levels by making automatic adjustments for each program.
SOUND & LANGUAGE CONTROL CLEAR VOICE II By differentiating the human sound range from others, it helps users listen to human voices better. AUDIO Volume : Off Off :: Off ● Balance ● Sound Mode ● Auto 33 ► Clear Voice Voice IIII ●●Clear AUDIO OK ► ● Auto Move 0 L R : Standard • Infinite Sound : Off • Treble 50 • Bass 50 • Reset 1 2 SOUND & LANGUAGE CONTROL 3 Select AUDIO.
SOUND & LANGUAGE CONTROL PRESET SOUND SETTINGS-SOUND MODE You can select your preferred sound setting; Standard, Music, Cinema, Sport or Game and you can also adjust the Treble, Bass. Sound Mode lets you enjoy the best sound without any Special adjustment as the TV sets the appropriate sound options based on the programme content. Standard, Music, Cinema, Sport and Game are preset for optimum sound quality at the factory. Standard Music Cinema Sport Game Offers standard-quality sound.
SOUND & LANGUAGE CONTROL SOUND SETTING ADJUSTMENT -USER MODE AUDIO Move Volume ● Clear Voice II : Off ● Auto 3 L R ► Standard(User) :: Standard • Treble 50 • Bass 50 3 4 5 : Off Sound Mode Mode ●●Sound OK 3 L R Standard(User) 0 Standard ● Balance Standard(User) :: Standard Music • Infinite Sound : OffCinema • Treble 50 Sport • Bass • Reset 2 Voice II Move : Off ► 0 • Infinite Sound : Off 1 Volume ● Clear ● Balance Sound Mode Mode ●●Sound AUDIO OK : Off ► ● Auto 5
SOUND & LANGUAGE CONTROL BALANCE You can adjust the sound balance of the speakers to preferred levels. AUDIO Volume ● Clear Voice II : Off : Off Mode ● Auto 3 00 L R 2 : Standard ● Sound Mode OK : Off : Off 3 0●0LBalance : Standard • Infinite Sound : Off • Infinite Sound : Off • Treble 50 • Treble 50 • Bass 50 • Bass 50 R 0◄ L R ► Close • Reset Select AUDIO. Select Balance. Make desired adjustment.
SOUND & LANGUAGE CONTROL TV SPEAKERS ON/ OFF SETUP You can adjust the TV internal speaker status. In AV, COMPONENT, RGB and HDMI1 with HDMI to DVI cable, the TV speaker can be operational even when there is no video signal. If you wish to use an external Hi-Fi system, turn off the TV’s internal speakers.
SOUND & LANGUAGE CONTROL DTV AUDIO SETTING (IN DIGITAL MODE ONLY) When different audio types exist in an input signal, this function allows you to select the audio type you want.
SOUND & LANGUAGE CONTROL SELECTING DIGITAL AUDIO OUT This function allows you to select your preferred Digital Audio Output. The TV can only output Dolby Digital if a channel is broadcast with Dolby Digital audio. When Dolby Digital is available, selecting Auto in the Digital Audio Out menu will set SPDIF(Sony Philips Digital InterFace) output to Dolby Digital. If Auto is selected in the digital audio out menu when Dolby Digital is not available, SPDIF output will be PCM(Pulse-code modulation).
SOUND & LANGUAGE CONTROL AUDIO RESET Settings of the selected Sound Mode return to the default factory settings. AUDIO Mode : Standard ● Sound Speaker ● DTV Audio 1 2 4 : Standard • Infinite Sound : Off • Treble 50 • Treble • Bass 50 • Bass 50 ? All audio settings will be resetted. 50 Continue? • Reset : PCM ● Digital Audio : On ● TV Setting : Auto OK Speaker ● DTV Audio Out : PCM Yes No : On Setting : Auto Select AUDIO. Select Reset.
SOUND & LANGUAGE CONTROL STEREO/DUAL RECEPTION (IN ANALOGUE MODE ONLY) When a programme is selected, the sound information for the station appears with the programme number and station name. 1 Select Audio Language. 2 Select the sound output. Broadcast MONO Stereo STEREO Dual SOUND & LANGUAGE CONTROL 122 On Screen Display Mono DUAL I, DUAL II, DUAL I+II ■■ Mono sound selection If the stereo signal is weak in stereo reception, you can switch to mono.
SOUND & LANGUAGE CONTROL NICAM RECEPTION (IN ANALOGUE MODE ONLY) If the TV is equipped with a receiver for NICAM reception, high quality NICAM (Near Instantaneous Companding Audio Multiplex) digital sound can be received. Sound output can be selected according to the type of broadcast received. 1 When NICAM mono is received, you can select NICAM MONO or FM MONO. 2 When NICAM stereo is received, you can select NICAM STEREO or FM MONO. If the stereo signal is weak, switch to FM MONO.
SOUND & LANGUAGE CONTROL ON-SCREEN MENU LANGUAGE / COUNTRY SELECTION The installation guide menu appears on the TV screen when it is switched on for the first time. 1 Select your desired language. 2 Select your country. * If you want to change Language/ Country selection 1 2 Select Language(Language). 3 Select Menu Language. 4 5 SOUND & LANGUAGE CONTROL 124 1 Select OPTION. Select your desired language. Select OPTION. 2 Select Country/Area. 3 4 Select your country. Save. Save.
SOUND & LANGUAGE CONTROL LANGUAGE SELECTION (IN DIGITAL MODE ONLY) The Audio function allows selection of a preferred language. If audio data in a selected language is not broadcast, the default language audio will be played. Use the Subtitle function when two or more subtitle languages are broadcast. If subtitle data in a selected language is not broadcast, the default language subtitle will be displayed.
SOUND & LANGUAGE CONTROL Audio Language OSD Information < Audio Language Selection > ►►When two or more audio languages are broadcast, you can select the audio language. 1 2 Display N.A Status Not Available MPEG Audio Dolby Digital Audio Audio for “Visual Impaired” Audio for “Hearing Impaired” Select Audio Language. Dolby Digital Plus Audio HE-AAC HE-AAC Audio Select an audio language.
TIME SETTING CLOCK SETUP The clock is set automatically when receiving a digital signal in Auto mode. You can set the clock manually in Manual mode. You must set the time correctly before using on/off timer function. TIME Move TIME OK ● Clock Move ● Clock Time : Off ● Off Time ◄ : OffYear ● On Time : Off ● On Time : Off : Off ● Sleep ● Sleep ► ● Off Timer Timer : Off OK ► Auto 2008 Month Mar. Date 8 Hour 16 Minute 09 Close 1 3 4 5 Select Clock. Select Auto or Manual.
TIME SETTING AUTO ON/OFF TIME SETTING The Off time function automatically switches the TV to standby at a preset time. Two hours after the TV is switched on by the on time function it will automatically switch back to standby mode unless a button has been pressed. The Off time function overrides the On time function if both are set to the same time. The TV must be in standby mode for the On time to work.
TIME SETTING SLEEP TIMER SETTING You do not have to remember to switch the TV off before you go to sleep. The sleep timer automatically switches the TV to standby after the preset time has elapsed. 1 2 Select Sleep Timer. Select Off, 10, 20, 30, 60, 90, 120, 180 or 240 min. •W hen you switch the TV off, the preset sleep timer is cancelled. •Y ou can also adjust Sleep Timer in the TIME menu.
PARENTAL CONTROL / RATINGS SET PASSWORD & LOCK SYSTEM Enter the password, press ‘0’, ‘0’, ‘0’, ‘0’ on the remote control handset. If a channel is locked, enter the password to unlock it temporarily. LOCK Move OK Password ● Lock System ● Block Programme ● Input Block ● Key 1 2 3 PARENTAL CONTROL / RATINGS 4 5 Lock : Off ● Key Select LOCK.
PARENTAL CONTROL / RATINGS BLOCK PROGRAMME Blocks any programme that you do not want to watch or that you do not want your children to watch. It is available to use this function in Lock System ”On”. Enter a password to watch a blocked programme.
PARENTAL CONTROL / RATINGS EXTERNAL INPUT BLOCKING Enables you to block an input. It is available to use this function in Lock System ”On”.
PARENTAL CONTROL / RATINGS KEY LOCK This feature can be used to prevent unauthorized viewing by locking out the front panel controls, so that it can only be used with the remote control. This TV is programmed to remember which option it was last set to even if you turn the TV off.
DIGITAL TELETEXT The TV gives you access to digital teletext which is greatly improved in various aspects such as text, graphics etc. This digital teletext can access special digital teletext services and specific services which broadcast digital teletext. TELETEXT WITHIN DIGITAL SERVICE 1 Press the numeric or P button to select a digital service which broadcasts digital teletext.
APPENDIX TROUBLESHOOTING The TV does not operate properly. The remote control does not work ■■ Check to see if there is any object between the TV and the remote control causing an obstruction. Ensure you are pointing the remote control directly at the TV. ■■ Ensure that the batteries are installed with correct polarity (+ to +, - to -). ■■ Install new batteries. ■■ Is the sleep timer set? Power is suddenly ■■ Check the power control settings. Has the Power supply been interrupted.
APPENDIX The audio function does not work. Picture OK & No sound No output from one of the speakers Unusual sound from inside the TV No sound when connecting HDMI or USB ■■ Press the + or - button. ■■ Sound muted? Press MUTE button. ■■ Try another channel. The problem may be with the broadcast. ■■ Are the audio cables installed properly? ■■ Adjust Balance in menu option.
APPENDIX MAINTENANCE Early malfunctions can be prevented. Careful and regular cleaning can prolong the life of your new TV. Caution: Be sure to switch the power off and unplug the power cord before you begin any cleaning. Cleaning the Screen 1 A good way to keep the dust off your screen for a while is to wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until it is almost dry, and then use it to wipe the screen.
■
APPENDIX IR CODES *This feature is not available for all models. Code (Hexa) Function Note 95 Energy Saving R/C BUTTON 08 POWER R/C BUTTON(POWER ON/OFF) 0B INPUT R/C BUTTON 79 RATIO R/C BUTTON F0 TV/RAD R/C BUTTON 45 Q.
APPENDIX EXTERNAL CONTROL DEVICE SETUP RS-232C Setup HDMI / DVI IN 2 1 VIDEO L/MONO AUDIO R Connect the RS-232C (serial port) input jack to an external control device (such as a computer or an A/V control system) to control the product’s functions externally. Connect the serial port of the control device to the RS-232C jack on the product back panel. Note: RS-232C connection cables are not supplied with the product. AV IN 1 2 1 ANTENNA IN Type of Connector; D-Sub 9-Pin Male No.
APPENDIX Set ID Use this function to specify a set ID number. Refer to ‘Real Data Mapping’. ► p.
APPENDIX Communication Parameters ■■ Baud rate : 9600 bps (UART) ■■ Data length : 8 bits ■■ Parity : None ■■ Stop bit : 1 bit ■■ Communication code : ASCII code ■■ Use a crossed (reverse) cable. Transmission / Receiving Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] Command Reference List COMMAND COMMAND 1 2 01. Power APPENDIX 142 k DATA (Hexadecimal) a 00 to 01 02. Aspect Ratio k c Refer to p. 143 03. Screen Mute k d Refer to p. 143 04. Volume Mute k e 00 to 01 05.
APPENDIX 01. Power (Command: k a) ►► To control Power On/Off of the set. Transmission [k][a][ ][Set ID][ ][Data][Cr] Data 00 : Power Off Ack 01 : Power On [a][ ][Set ID][ ][OK/NG][Data][x] ►► To show Power On/Off. Transmission ►► To control volume mute on/off. You can also adjust mute using the MUTE button on remote control.
APPENDIX 09. Tint (Command: k j) ►► To adjust the screen tint. You can also adjust tint in the PICTURE menu. Transmission 13. Treble (Command: k r) ►► To adjust treble. You can also adjust treble in the AUDIO menu. Transmission [k][j][ ][Set ID][ ][Data][Cr] [k][r][ ][Set ID][ ][Data][Cr] Data Red : 00 to Green : 64 * Refer to ‘Real data mapping 1’. See page 145. Ack Data Min : 00 to Max : 64 * Refer to ‘Real data mapping 1’. See page 145. [j][ ][Set ID][ ][OK/NG][Data][x] 10.
APPENDIX 17. ISM Method (Command: j p) (Plasma TV only) 20. Tune Command (Command: m a) ►► To control the ISM method. You can also adjust ISM Method in OPTION menu. Transmission ►► Select channel to following physical number. Transmission [j][p][ ][Set ID][ ][Data][Cr] Data 02: 04: 08: 20: [m][a][ ][Set ID][ ][Data0][ ][Data1][ ][Data2][Cr] Data00 : High channel data Data01 : Low channel data ex. No. 47 -> 00 2F (2FH) No. 394 -> 01 8A (18AH), DTV No.
APPENDIX 22. Key(Command: m c) ►► To send IR remote key code. Transmission [m][c][ ][Set ID][ ][Data][Cr] Data Key code - Refer to page 139. Ack [c][ ][Set ID][ ][OK/NG][Data][x] 24. Input select (Command: x b) (Main Picture Input) ►► To select input source for main picture. Transmission [x][b][ ][Set ID][ ][Data][Cr] Data Structure MSB 0 23. Control Back Light (Command: m g) ►► To Control the back light.
APPENDIX OPEN SOURCE SOFTWARE NOTICE The following GPL executables and LGPL, MPL libraries used in this product are subject to the GPL2.0/LGPL2.1/MPL1.1 License Agreements: GPL EXECUTABLES: Linux kernel 2.
APPENDIX All rights reserved.
APPENDIX OPEN SOURCE LICENSE GNU GENERAL PUBLIC LICENSE Version 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. Preamble The licenses for most software are designed to take away your freedom to share and change it.
APPENDIX 1. You may copy and distribute verbatim copies of the Program's source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and give any other recipients of the Program a copy of this License along with the Program.
APPENDIX If distribution of executable or object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place counts as distribution of the source code, even though third parties are not compelled to copy the source along with the object code. 4. You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this License.
APPENDIX NO WARRANTY 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.
APPENDIX GNU LESSER GENERAL PUBLIC LICENSE Version 2.1, February 1999 Copyright (C) 1991, 1999 Free Software Foundation, Inc. 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. [This is the first released version of the Lesser GPL. It also counts as the successor of the GNU Library Public License, version 2, hence the version number 2.1.
APPENDIX Although the Lesser General Public License is Less protective of the users' freedom, it does ensure that the user of a program that is linked with the Library has the freedom and the wherewithal to run that program using a modified version of the Library. The precise terms and conditions for copying, distribution and modification follow. Pay close attention to the difference between a "work based on the library" and a "work that uses the library".
APPENDIX Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the Library. In addition, mere aggregation of another work not based on the Library with the Library (or with a work based on the Library) on a volume of a storage or distribution medium does not bring the other work under the scope of this License. 3.
APPENDIX c) Accompany the work with a written offer, valid for at least three years, to give the same user the materials specified in Subsection 6a, above, for a charge no more than the cost of performing this distribution. d) If distribution of the work is made by offering access to copy from a designated place, offer equivalent access to copy the above specified materials from the same place.
APPENDIX 13. The Free Software Foundation may publish revised and/or new versions of the Lesser General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number.
APPENDIX MOZILLA PUBLIC LICENSE Version 1.1 --------------1. Definitions. 1.0.1. "Commercial Use" means distribution or otherwise making the Covered Code available to a third party. 1.1. "Contributor" means each entity that creates or contributes to the creation of Modifications. 1.2. "Contributor Version" means the combination of the Original Code, prior Modifications used by a Contributor, and the Modifications made by that particular Contributor. 1.3.
APPENDIX (b) under Patents Claims infringed by the making, using or selling of Original Code, to make, have made, use, practice, sell, and offer for sale, and/or otherwise dispose of the Original Code (or portions thereof). (c) the licenses granted in this Section 2.1(a) and (b) are effective on the date Initial Developer first distributes Original Code under the terms of this License. (d) Notwithstanding Section 2.
APPENDIX (b) Contributor APIs. If Contributor's Modifications include an application programming interface and Contributor has knowledge of patent licenses which are reasonably necessary to implement that API, Contributor must also include this information in the LEGAL file. (c) Representations. Contributor represents that, except as disclosed pursuant to Section 3.
APPENDIX 6.3. Derivative Works.
APPENDIX 10. U.S. GOVERNMENT END USERS. The Covered Code is a "commercial item," as that term is defined in 48 C.F.R. 2.101 (Oct. 1995), consisting of "commercial computer software" and "commercial computer software documentation," as such terms are used in 48 C.F.R. 12.212 (Sept. 1995). Consistent with 48 C.F.R. 12.212 and 48 C.F.R. 227.7202-1 through 227.7202-4 (June 1995), all U.S. Government End Users acquire Covered Code with only those rights set forth herein. 11. MISCELLANEOUS.
Record the model number and serial number of the TV. Refer to the label on the back cover and quote this information to your dealer when requiring any service. Model : Serial No.
