Installation Manual

206-4317 Draft A.2

Commercial Mode Overview

This document describes how to set up LV570H Pro:Centric

TVs for Commercial Mode operation. LG

commercial TV functionality is based on “ownership” of the Channel Map; that is, the Channel Map resides

in the TV’s CPU, Protocol Translator Card (PTC), or the embedded b-LAN™ (EBL) module, or it resides

externally from the TV (i.e., in a device from the solution provider).

These TV models are capable of Free-To-Guest (FTG) Mode operation via the TV CPU. Alternatively, the

EBL module can be configured either for Pass-through Mode (default) or FTG Mode. When neither the CPU

nor EBL is in FTG Mode, these TV models also allow external control via the TV’s MPI port.

Setup Checklist

Note: This document provides information specific to Commercial Mode operation. Refer to the Owner’s

Manual and/or Easy Setup Guide for information on TV installation and hardware and cable connections.

Installation

__ Unpack TV and all accessories.

__ Install batteries in the Installer Remote.

__ Install TV on VESA mount or stand.

Note: It may be advisable to make all cable

connections before installing on VESA mount

or stand, as appropriate.

Hardware Connections

__ Install any additional hardware as

appropriate to your institution, LAN, etc.

Cable Connections

__ Make all rear jack panel connections, as

appropriate.

Commercial Mode Setup

__ Complete appropriate procedures as described

in this document for Commercial Mode operation.

Pass-through Mode

This mode allows you to configure individual TVs for Pro:Centric and/or FTG Mode via CPU operation.

This mode also allows external control via the GAME CONTROL/MPI port on the TV rear jack panel.

There are two methods for configuring individual TVs that are currently in Pass-through Mode: either

using the EZ-Manager Wizard or the Custom Master TV Setup procedure as described in this document.

EZ-Manager Wizard

When the TV is in a factory default state, the EZ-Manager Wizard provides automated or manual options

for conﬁ guring essential items for Pro:Centric operation and also provides an option for using a USB

memory device to conﬁ gure the TV. Use the Installer Remote to make selections and complete each step.

See “EZ-Manager Wizard” on pages 12 to 19 for detailed information.

Custom Master TV Setup

The Custom Master TV Setup procedure enables you to create a customized Master TV Setup for

Pass-through Mode or FTG Mode via CPU configuration purposes. Use the Installer Remote to conﬁ gure

Installer Menu items as required for TV operation and set up TV features (Channel, Picture, Audio, etc.).

See “Custom Master TV Setup” on pages 34 to 36 for detailed information.