Installation Manual

40
206-4317 Draft A.2
(Continued from previous page)
5. Press MENU SETTINGS on the Installer Remote to display the TV
setup menus (TV is in Pass-through Mode) or the Function Menu (TV
is already in FTG Mode).
6. Use the arrow navigation keys to select/highlight either the Option
menu icon from the TV setup menus or the Lock menu icon from the
Function Menu. Then, press the number “7” key a total of seven times
to access the TV Manager.
7. Use the Up/Down arrow keys to select Import Clone File, and then
press OK.
8. In the Import Clone File window, use the Up/Down arrow keys to select
the “.tlx” fi le you want to import.
Note: Filenames of exported Clone fi les are comprised of the TV
model and a fi ve-digit number, for example, xxLV570H-UA00001.TLX .
9. If the Clone/Confi guration (.tlx) fi le includes an FTG Channel Map,
select the desired Channel Tuning / Channel Banner Display option at
the right side of the Import Clone File window:
• Press the green button on the Installer Remote to select
Logical tuning, or
• Press the yellow button on the Installer Remote to select
Physical tuning.
A checkmark will appear at the left of the selected option. Logical
tuning is selected by default.
Note: If the “.tlx” fi le does not include an FTG Channel Map, the
message, “No Channel Map in TLX fi le,” will be displayed at the right
of the screen.
Cloning Procedures (Cont.)
Updating Clone File... 50 %
Do not remove the USB from the port! Do not unplug!
xxLV570H-UA00001.tlx
Import Clone File
xxLV570H-UA00001.TLX
Previous
OK
Channel Tuning /
Channel Banner Display
Logical
Physical
TV Manager
USB
Diagnostics
Previous
OK
Ez Download
Logo Image Download
Update TV Software
Update PTC Software
Import Clone File
Note: TV Manager / Diagnostics
is for service use only.
10. Press OK on the Installer Remote when you are ready to continue.
Import progress will be shown in a new window. Do NOT remove the
USB device while importing is in progress. When the import process
is complete, an “Updating Complete” window will briefl y be displayed,
and then, the TV will reboot.
11. Remove the USB memory device from the Target TV, and verify that
the appropriate configuration is now resident on the Target TV.
Note: If the Target TV was previously in Pass-through Mode and the Clone/Confi guration
(.tlx) fi le that was imported contained an FTG Channel Map, the Target TV is now in FTG
Mode via CPU. Upon restart, the TV tunes according to the Start Channel setting in the
Installer Menu. If a Start Channel is specifi ed, the TV will tune to that channel, though, in
the case of FTG Mode via CPU confi guration, a channel banner will only be displayed if the
Start Channel is included in the FTG Channel Map (depending on your selection in step 9,
the channel banner will display either the Start Channel’s logical channel number or physical
RF channel number). Otherwise, the TV will either return to the last channel tuned (TV in
Pass-through Mode) or tune to the fi rst channel in the FTG Channel Map (TV in FTG Mode
via CPU). If the latter, remember that the channels in the FTG Channel Map are always
arranged in logical order, regardless of your selection in step 9.