Installation Manual

34
206-4317 Draft A.2
Custom Master TV Setup
This section describes how to create a customized Master TV Setup for cloning purposes when
the TV is in Pass-through Mode. All cloning (export and import) processes on the TV are performed
via USB memory device / “.tlx” fi le. The Master TV Setup may be exported to a Clone (.tlx) file,
which can then be used (i.e., imported) to configure either TVs that are to remain in Pass-through
Mode or TVs that are to be configured for FTG Mode via CPU.
Cloning requirements and procedures are described in detail on pages 37 to 40.
Note: You can also use the FTG File Manager to create an FTG Confi guration (.tlx) fi le for FTG
Mode via CPU confi guration, if desired (see pages 41 to 42). However, it is not possible to
customize TV setup menu settings in the FTG File Manager. If you wish to include customized TV
setup menu settings in the TV confi guration, in addition to the channel lineup and Installer Menu
settings, perform the Master TV Setup procedure to create a Clone (.tlx) confi guration fi le.
Before You Begin
• It is recommended that you disconnect all Aux inputs if you intend to run Auto Tuning (Channel
Search). Under certain conditions, Auto Tuning is disabled if there is an Aux input active.
• A Clone (.tlx) fi le comprises Installer Menu settings, IP Environment Menu settings (with the
exception of Network Connection settings), and all TV sources’ (analog, digital, AV1, HDMI, etc.)
clonable setup menu settings. See also “Clonable TV Setup Menu Features” list below.
• If the “.tlx” fi le (either a Clone or FTG Confi guration fi le) to be imported on the Target TV(s)
contains an FTG Channel Map, the Target TV(s) will be confi gured for FTG Mode via CPU,
though as part of the import process, you will have the option to select either logical or physical
channel tuning. If you would like the Target TV(s) to remain in Pass-through Mode, the “.tlx” fi le
should not include an FTG Channel Map.
Clonable TV Setup Menu Features
Channel
Auto Tuning (Channel Lineup)
Manual Tuning
Channel Edit
Channel Label
Picture
Picture Mode
Audio
Sound Mode
Sound Effect
Auto Volume
Sound Out
AV Sync Adjust
Sound Optimizer
Time
Clock
− Clock Mode (Auto/Manual)
− Time Zone
− Daylight Saving
Auto Off
Option
Language
Caption
Standby Light
Note: Some menu options vary between analog and digital channels and Aux inputs.