Installation Manual

206-4317 Draft A.2

Ez Download Utility (Cont.)

(Continued from previous page)

8. The ﬁ elds at the right of the screen will change depending on the currently highlighted ﬁ le.

Select the appropriate option(s) for each ﬁ le, as applicable.

• For software and splash screen image ﬁ les: The ﬁ elds at the right of the screen show the TV

software versions and any available Forced Update options. Do not select any Forced Update

options unless you have been speciﬁ cally instructed to do so or have previous experience with

Expert Software Updates.

• For Clone/Conﬁ guration (.tlx) ﬁ les: If an FTG Channel Map is included in the selected Clone/

Conﬁ guration (.tlx) ﬁ le, a Channel Tuning / Channel Banner Display ﬁ eld at the right of the

screen enables you to choose the format for the channel tuning/banner display. Press the

green button on the Installer Remote to select Logical tuning, or press the yellow

button on the Installer Remote to select Physical tuning. A checkmark will appear at the left

of the selected option. Logical tuning is selected by default.

Note: If the selected “.tlx” ﬁ le does not include an FTG Channel Map, the message, “No

Channel Map in TLX ﬁ le,” will be displayed at the right of the screen.

9. When you are ready to continue, use the arrow keys on the Installer Remote to select Apply,

and then press OK.

Update progress will be shown in a new window. Do NOT remove the USB device while

updates are in progress. When the Ez Download process is complete, an overview of the

results will brieﬂ y be displayed and then, the TV will reboot.

10. Remove the USB memory device, and verify that the appropriate configuration/update(s) is/are

resident on the TV.

Note: If you updated the TV configuration with a Clone/Conﬁ guration file, upon restart, the TV

tunes according to the Start Channel setting in the Installer Menu. If a Start Channel is speciﬁ ed,

the TV will tune to that channel, though in the case of FTG Mode via CPU conﬁ guration, a channel

banner will only be displayed if the Start Channel is included in the FTG Channel Map (depending

on your selection in step 8, the channel banner will display either the Start Channel’s logical

channel number or physical RF channel number). Otherwise, the TV will either return to the last

channel tuned (TV in Pass-through Mode) or tune to the ﬁ rst channel in the FTG Channel Map

(TV in FTG Mode via CPU). In the latter case, remember that the channels in the FTG Channel

Map are always arranged in logical order, regardless of your selection in step 8.