Installation Manual

206-4317 Draft A.2

EZ-Manager Wizard (Cont.)

(Continued from previous page)

• Ensure the USB device to be used has been formatted with FAT format.

• When creating ﬁ les to be downloaded, avoid using special characters (?, &, @, etc.) in ﬁ lenames.

• Refer to “Ez Download Utility” on pages 20 to 22 for further information on the Ez Download utility.

• Refer to “Custom Master TV Setup” on pages 34 to 36 for information on creating a Clone (.tlx)

file, and/or refer to “Creating an FTG Conﬁguration File” on pages 41 to 46 for information on

creating an FTG Conﬁguration (.tlx) ﬁle for FTG Mode via CPU conﬁguration.

• See Reference section, “Downloading a Splash Screen Image using a USB Memory Device,” for

splash screen image guidelines.

• See Reference section, “Updating TV/PTC Software using a USB Memory Device,” for further

information on software updates.

USB Conﬁ guration via EZ-Manager Wizard

With either the TV Conﬁ guration Options or the Zone, Label, and Room Number screen on display,

proceed as follows to conﬁ gure the TV using the USB memory device.

1. Insert the USB memory device with the appropriate ﬁ le(s) into the TV’s USB port.

2. Use the arrow keys on the Installer Remote to select USB Conﬁ guration, and then press OK.

You will be redirected to the TV Manager / USB download options.

TV Manager

USB

Diagnostics

Ez Download

Logo Image Download

Update TV Software

Update PTC Software

Import Clone File

3. Select the appropriate option from the TV Manager, and initiate the desired download(s).

Update progress will be displayed on the screen. Do NOT remove the USB device while

updates are in progress. When the update process is complete, the TV will reboot. Upon

restart, depending on the type of update(s) completed, either the EZ-Manager TV Configuration

Options screen will be redisplayed (software and/or splash screen image updates only) or the

TV will tune according to the Start Channel setting in the Installer Menu (TV configured with

Clone/Configuration file).

Note: If the TV Configuration Options screen is redisplayed (software and/or splash screen

image updates only), you can either proceed with configuration via the EZ-Manager Wizard or

exit the EZ-Manager Wizard, as required.

4. Remove the USB memory device, and verify that the appropriate configuration/update(s) is/

are resident on the TV.

Note: You can press on the Installer Remote at

any time to return to the EZ-Manager Wizard.