Installation Manual

206-4317 Draft A.2

EZ-Manager Wizard (Cont.)

(Continued on next page)

(Continued from previous page)

4. Once all ﬁ elds are completed as required, you have two options:

• To save the data entered and exit the wizard, use the arrow keys to select Exit and then press

OK. In the subsequent pop-up conﬁ rmation window, select Save and Exit, and then press OK

once more. The Pro:Centric application and/or E-Z Installation data will be downloaded to the

TV at a later time. This option is useful, in particular, if the Pro:Centric server has not yet been

conﬁ gured.

• To initiate a real-time download of Pro:Centric application and/or E-Z Installation data, use the

arrow keys to select Next, and then press OK (see also note below).

Note: With RF conﬁ guration, Pro:Centric server data must be present on the RF channel

selected as the TV’s Data Channel in order for you to select “Next” (you will see a “Data

channel found” message below the Signal Quality indicator). With IP conﬁ guration, Pro:Centric

server data must be present via the wired LAN cable connection in order for you to select

“Next” (you will see a “IP server found” message below the Port ﬁ eld).

If you opt to initiate a real-time download in the last step, the EZ-Manager Wizard will proceed with

the Pro:Centric application and/or E-Z Installation data downloads (see Processing the Pro:Centric

Conﬁ guration screen example on page 16). When the Pro:Centric conﬁ guration is complete, an

EZ-Manager Conﬁ guration Complete screen (see example on page 16) is displayed, and after

10 seconds, the wizard exits, and the TV turns OFF.

Note: With the EZ-Manager Conﬁ guration Complete screen on display, you also have the option

to manually turn off or reboot the TV. If desired, select Turn Off or Reboot, respectively, and then

press OK on the Installer Remote.

USB Conﬁ guration

TV Manager / USB download options enable you to download conﬁ guration or software ﬁ les

individually from a USB memory device to the TV. You can also use the Ez Download utility available

from the menu to select one of each type of ﬁ le to be downloaded at one time using one process.

Each of the USB download functions requires that you have the appropriate ﬁ le(s) loaded on a

USB memory device. If you wish to perform a software update or download a splash screen

image, the software/image ﬁ le(s) must be stored in a folder named “LG_DTV” in the root directory

of the USB device. Clone/Conﬁ guration (.tlx) ﬁ les should simply be stored in the root directory of

the USB device.

The procedure below assumes that the desired ﬁ le(s) is/are already loaded onto the USB device.

For further information on TV Manager / USB download options and ﬁ le requirements, and/or for

information on creating Clone/Conﬁ guration (.tlx) ﬁ les, refer to the appropriate section(s) in this

document.

Before You Begin

• If you intend to use the Zoning feature on this TV, make sure to assign the appropriate TV

Zone # in the EZ-Manager’s Zone, Label, and Room Number screen BEFORE continuing with

USB Conﬁ guration. See “TV Conﬁ guration Options” on page 13 for further information.