LCD TV MODEL: 26LC2D OWNER’S MANUAL Internet Home Page : http://www.lge.com http://www.lg.ca ENERGYSTAR is a set of power-saving guidelines issued by the U.S. Environmental Protection Agency(EPA). As an ENERGY STAR Partner LGE U. S. A.,Inc. has determined that this product meets the ENERGY STAR guidelines for energy efficiency. Please read this manual carefully before operating your set. Retain it for future reference. Record model number and serial number of the set.
Warning Warning CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Safety Instructions Safety Instructions WARNING : To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus. IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. Ow ner's Man ual 2. Keep these instructions. 8.
Safety Instructions 12. Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart / apparatus combination to avoid injury from tip-over. 14. Refer all servicing to qualified service personnel.
Contents Operation Installation Introduction Contents 2 Warning 3~4 Safety Instructions 7 Accessories / Optional Extras 8 Controls 9 Connection Options 10~11 Remote Control Key Function 12 13 14 Attaching the TV to a wall Desktop Pedestal Installation Basic Connection 15 16~17 18~19 20~21 22 22 23 24~26 Antenna or Cable Connection VCR Setup DVD Setup HDSTB Setup External AV Source Setup AV Out Setup Digital Audio Output PC Setup Basic operation 27 27 27 27 28 Turning on the TV Volume A
Operation Contents Time Menu Options 41 41 42 42 43 Manual Clock Setup Auto Clock Setup On/Off Timer Setup Sleep Timer Auto Off Option Menu Features 44 45 46 Aspect Ratio Control Caption/Text Caption Option 47~48 Parental Lock Setup 49~53 External Control Device Setup 54~55 IR Codes 56 Programming the Remote 57~58 Programming Codes 59~60 Troubleshooting Checklist 61 Maintenance 62 Product Specifications Reference Lock Menu Options 6
Introduction Introduction Accessories IM ER R TE Ensure that the following accessories are included with your product. If any accessory is missing, please contact the dealer from where you purchased the product. User must use shield signal interface cable (D-sub 15 pin cable) with ferrite cores to maintain the standard compliance for the product.
Introduction Controls - This is a simplified representation of front panel. - This picture shown below may be somewhat different from your TV. CH VOL ENTER CHANNEL (D, Buttons E) VOLUME (F,G) Buttons ENTER Button MENU MENU Button INPUT INPUT Button R (Power) Button Remote Control Sensor Power/Standby Indicator • illuminates red in standby mode. • illuminates green when the set is switched on.
Introduction Connection Options - This picture shown below may be somewhat different from your TV. S-VIDEO Input Provides better picture quality than the video input. VIDEO Input Connects the video signal from a video device. AUDIO Input Connections are available for listening to stereo sound from an external device.
Introduction Remote Control Key Functions TV INPUT In AV 1-2, Component 1-2, RGB-PC, HDMI1/DVI or HDMI2 input sources, screen returns to the last TV channel. INPUT External input modes rotate in regular sequence: TV, AV1-2, Component 1-2, RGB-PC, HDMI1/DVI or HDMI2. (AV 1-2, Component 1-2, RGB-PC , HDMI1/DVI or HDMI2 input sources are linked automatically, only if these are connected.
Introduction TV, DVD, VCR Selects the remote operating mode: TV, VCR, DVD. Select other operating modes, for the remote to operate external devices. COMP1 Directly, select Component1 input. COMP2 Directly, select Component2 input. HDMI RGB-PC EZ PIC EZ SOUND ADJUST INFO Directly, select HDMI1/DVI input. Directly, select RGB input. Adjust the factory preset picture depend on the viewing environment.(red) G p.33 Select the appropriate type of sound for type of program.(green) G p.
Installation Installation Attaching the TV to a wall We recommend that you set up the TV close to a wall so it cannot fall over if pushed backwards. Additionally, we recommend that the TV be attached to a wall so it cannot be pulled in a forward direction, potentially causing injury or damaging the product. Caution: Please make sure that children don’t climb on or hang from the TV. ■ Insert the eye-bolts (or TV brackets and bolts) to tighten the product to the wall as shown in the picture.
Installation Desktop Pedestal Installation For proper ventilation, allow a clearance of 4inches on each side from the wall. 4 inches 4 inches 4 inches 4 inches CAUTION G Ensure adequate ventilation by following the clearance recommendations. This picture shown below may be somewhat different from your TV. Power Supply Short-circuit Breaker GROUNDING Ensure that you connect the earth ground wire to prevent possible electric shock.
Basic Connection 1 Connect the cables as necessary. After connecting the cables neatly, arrange the cables to the Cable Holder. To connect an additional equipment, see the External equipment Connections section. Cable holder 2 Reinstall the CABLE MANAGEMENT as shown. 3 Bundle the cables using the supplied twister holder. CABLE MANAGEMENT How to remove the CABLE MANAGEMENT - Hold the CABLE MANAGEMENT with both hands and pull it upward. Do not hold the CABLE MANAGEMENT when moving the product.
Installation External Equipment Connections NOTE: All cables shown are not included with the TV Antenna Or Cable Connection Analog and Digital TV signals provided on antenna - Antenna or Cable Service without a Cable Box Connection. - For optimum picture quality, adjust antenna direction if needed.
Installation VCR Setup - To avoid picture noise (interference), leave an adequate distance between the VCR and TV. - Typically a frozen still picture from a VCR. If the 4:3 picture format is used; the fixed images on the sides of the screen may remain visible on the screen. When connecting with an antenna 2 ANT IN ANT OUT 1 Connect the RF antenna out socket of the VCR to the ANTENNA/CABLE IN socket on the set. 2 Connect the antenna cable to the RF antenna in socket of the VCR.
Installation COMPONENT IN AUDIO VIDEO AV OUT ( S-VIDEO VIDEO AV IN 1 DIGITAL OPTICAL AUDIO OUT ) AUDIO When connecting with an S-Video cable VCR ANT IN S-VIDEO OUT 4 Connect the S-VIDEO output of the VCR to the SVIDEO input on the set. The picture quality is improved; compared to normal composite (RCA cable) input. 2 Connect the audio outputs of the VCR to the AUDIO input jacks on the set. 3 Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.
NT AUDIO VIDEO ) HDMI IN AV IN 1 ( S-VIDEO VIDEO AV OUT DIGITAL OPTICAL AUDIO OUT 1(DVI) 2 ANTENNA/ CABLE IN AUDIO Installation DVD Setup When connecting with a S-Video cable DVD S-VIDEO (R) AUDIO (L) 1 2 COMPONENT IN AUDIO VIDEO AV OUT (MONO) S-VIDEO VIDEO 1 Connect the S-VIDEO output of the DVD to the S-VIDEO input on the set. 2 Connect the audio outputs of the DVD to the AUDIO input jacks on the set. 3 Turn on the DVD player, insert a DVD.
Installation When connecting with a component cable B R (R) AUDIO (L) 1 2 AV OUT HDMI IN AV IN 1 (MONO) S-VIDEO VIDEO COMPONENT IN AUDIO VIDEO DIGITAL OPTICAL AUDIO OUT DVD 1(DVI) AUDIO 1 Connect the video outputs (Y, PB, PR) of the DVD to the COMPONENT IN VIDEO1 jacks on the set. 2 Connect the audio outputs of the DVD to the COMPONENT IN AUDIO1 jacks on the set. 3 Turn on the DVD player, insert a DVD.
Installation HDSTB Setup - This TV can receive Digital Over-the-air/Cable signals without an external digital set-top box. However, if you do receive Digital signals from a digital set-top box or other digital external device, refer to the figure as shown below. When connecting with a HDMI cable SERVICE RGB IN (PC) AUDIO IN (RGB/DVI) HDMI IN REMOTE CONTROL IN 1 Connect the HDMI output of the digital set-top box to the HDMI IN 1 (DVI) or 2 jack on the set.
SERVICE RGB IN (PC) AUDIO IN (RGB/DVI) HDMI IN REMOTE CONTROL IN 2 ANTENNA/ CABLE IN RS-232C IN (CONTROL & SERVICE) COMPONENT IN AUDIO VIDEO 1(DVI) Installation AV OUT ( S-VIDEO VIDEO AV IN 1 DIGITAL OPTICAL AUDIO OUT ) AUDIO When connecting with a HDMI to DVI cable SERVICE RGB IN (PC) HDMI IN AUDIO IN (RGB/DVI) REMOTE CONTROL IN 2 ANTENNA/ CABLE IN 1(DVI) RS-232C IN (CONTROL & SERVICE) (CONTROL SERVICE) 1 IO IN B/DVI) 2 N VICE) DVI-DTV OUTPUT (R) AUDIO (L) Digital Set-to
Installation External AV Source Setup 1 Connect the AUDIO/VIDEO jacks between TV and external equipment. Match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red). 2 Select AV2 input source with using the INPUT button on the remote control. - If connected to AV IN1 input, select AV1 input source. 3 Operate the corresponding external equipment. Refer to external equipment operating guide.
Installation Digital Audio Output - Send the TV’s audio to external audio equipment (stereo system) via the Digital Audio Output Optical port. AUDIO COMPONENT IN VIDEO AV OUT (MONO) S-VIDEO VIDEO 1/2 Connect one end of an optical cable to the TV Digital Audio Optical Output port. 2 Connect the other end of the optical cable to the digital audio optical input on the audio equipment. 3 See the external audio equipment instruction manual for operation.
ANTENNA/ CABLE IN 1(DVI) RS-232C IN (CONTROL & SERVICE) Installation PC Setup - This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings. When connecting with a D-sub 15 pin cable SERVICE 1 Connect the RGB output of the PC to the RGB IN (PC) jack on the set. 2 Connect the PC audio outputs to the AUDIO IN (RGB/DVI) jack on the set. 3 Turn on the PC and the set. 4 Select RGB-PC input source with using the INPUT button on the remote control.
Installation 1. Depending on the graphics card, DOS mode may not work if a HDMI to DVI Cable is in use. 2. When Source Devices connected with HDMI/DVI Input, output PC Resolution (VGA, SVGA, XGA, WXGA), Position and Size may not fit to Screen.Press the ADJUST button to adjust the screen Position of TV SET and contact an PC graphics card service center. 3.
Installation Screen Setup for PC mode - When RGB connect to PC input and select the RGB-PC, this function is used. - When HDMI/DVI connect to PC input and select HDMI/DVI input, this function is used. - After connecting RGB-PC or HDMI/DVI to PC input and checking the screen quality.
Operation Operation Basic operation Turning on the TV 1. First, connect power cord correctly. At this moment, the TV switches to standby mode. In standby mode to turn TV on, press the , INPUT, CH D / E button on the TV or press the POWER, TV INPUT, INPUT, CH D / E, Number (0 ~ 9) button on the remote control . 2. Select the viewing source by using TV INPUT, INPUT button on the remote control. This TV is programmed to remember which power state it was last set to, even if the power cord is out. 3.
Operation On Screen Menus Selection and Adjustment How to adjust the OSD screen 1. Press the MENU button and then D 2. Press the G button and then use D /E /F /G / E button to select each menu. button to display the available menus.
Operation Setup Menu Options EZ Scan (Channel Search) EZ Scan EZ Scan Manual Scan Manual Scan Channel Edit Channel Edit DTV Signal DTV Signal Input Source Input Source Input Label Input Label Set ID Set ID G Selection ( G or ) leads you to the EZ scan screen. Processing EZ scan... TV Ch.20 0 channel(s) found Press to stop the current scan and start DIGITAL ANTENNA channel scan.
Operation Setup Menu Options continued Channel Edit EZ Scan EZ Scan Manual Scan Manual Scan Channel Edit Channel Edit DTV Signal DTV Signal Input Source Input Source Input Label Input Label Set ID Set ID G Selection ( G or ) leads you to the channel edit screen. 2-0 * Custom List - There are two different ways in order to add or delete scanned channels. One is "Custom List" and the other is "Favorite List" in the channel list. Both of them are available after EZ Scan on the SETUP menu.
Operation DTV Signal Strength EZ Scan EZ Scan Manual Scan Manual Scan Channel Edit Channel Edit DTV Signal DTV Signal Input Source Input Source Input Label Input Label Set ID Set ID - Shows how strong your DTV signal is and whether you need to adjust your antenna or digital cable input. The higher the signal strength, the less likely you are to experience picture degradation. - DTV Signals: Only when the input signal is DTV or CADTV, this function is available.
Operation Setup Menu Options continued Input Label EZ Scan EZ Scan Manual Scan Manual Scan Channel Edit Channel Edit DTV Signal DTV Signal Input Source Input Source Input Label Input Label Set ID Set ID - Sets a label to each input source or lets you skip the input source which is not in use when you press INPUT button.
Operation V ideo Menu Options Auto Picture Control (EZ Picture) - EZ Picture adjusts the TV for the best picture appearance. Select the preset value in the EZ Picture menu based on the program category. - Daylight, Normal, Night Time settings are preset for optimum picture quality at the factory and are not adjustable. - In the User 1, and User 2 modes only, user can directly adjust the contrast, brightness, color, sharpness, tint.
Operation V ideo Menu Options continued Manual Color Temperature Control EZ Picture EZ Picture Color Temperature Color Temperature Cool XD XD Medium Advanced Advanced Warm Video Reset Video Reset User G Selection ( G or ) leads you to the detailed setting screen. Red User 0 E Red 0 Green 0 Blue 0 Press - You can also adjust the detailed set tings (Red, Green, Blue) by selecting the User menu. 1 2 3 4 34 MENU to confirm. Press the MENU button and then use VIDEO menu.
Operation XD EZ Picture EZ Picture Color Temperature Color Temperature XD XD Advanced Advanced Video Reset Video Reset - XD is LG Electronic’s unique picture improving technology to display a real HD source through an advanced dig-ital signal processing algorithm. G Manual XD Contrast On XD Color On XD Noise On 1 Press the MENU button and then use D menu. 2 3 Press the - When selecting EZ Picture options (Daylight, Normal and Night time), XD is automatically change to Auto.
Operation V ideo Menu Options continued Advanced-Cinema 3:2 Mode EZ Picture EZ Picture Color Temperature Color Temperature XD XD Advanced Advanced Video Reset Video Reset - Set up the TV for the best picture appearance for viewing movies. When you operate Cinema (3:2 Pull-Down Mode or Cinema Correction Mode),the TV will adjust 24 fps video from movies to 30 fps video for display (This function is only available in Analog,AV1,AV2,Component 480i mode.
Operation Video Reset EZ Picture EZ Picture Color Temperature Color Temperature XD XD Advanced Advanced Video Reset Video Reset - Use to quickly reset all the Video menu options to their original factory preset values. G Selection ( G or ) resets to the factory settings (default). 1 Press the MENU button and then use D / E button to select the VIDEO menu. 2 Press the 3 Press the G button to reset the Video menu options to original values.
Operation Audio Menu Options Audio Language Audio Language Audio Language EZ Sound EZ Sound Balance Balance TV Speaker TV Speaker - Other languages may be available if a digital signal is provided by the broadcasting station. G English Spanish French 1 Press the MENU button and then use AUDIO menu. 2 Press the G button and then use D / E button to select Audio Language. 3 Press the G button and then use Spanish, or French.
Operation Manual Sound Control (EZ Sound-User option) Audio Language EZ Sound Balance TV Speaker BBE Normal Stadium News Music Theater User User Treble 50 Bass 50 Front Surround G Off G Selection ( G or ) leads you to the detailed setting screen. Press - Adjust the sound in your preference and surrounded environment. 1 MENU to confirm. Press the MENU button and then use D / E button to select the AUDIO menu. 2 Press the G button and then use D /E button to select EZ Sound.
Operation Audio Menu Options continued Balance - Adjust the sound in your preference and surrounded environment. Audio Language Audio Language EZ Sound EZ Sound Balance Balance TV Speaker TV Speaker 0 L R Press the MENU button and then use D / E button to 1 select the AUDIO menu. 2 Press the G button and then use D / E button to select Balance. Balance 3 Press the G button and then use appropriate adjustments.
Operation T ime Menu Options Manual Clock Setup Auto Clock Auto Clock Manual Clock Manual Clock Off Timer Off Timer On Timer On Timer Sleep Timer Sleep Timer Auto Off Auto Off - If current time setting is wrong, reset the clock manually. 1 2 G Year Date Time --- ---/ -: -- -- Press the MENU button and then use D / E button to select the TIME menu. Press the Clock.
Operation T ime Menu Options continued On/Off Timer Setup Auto Clock Auto Clock Manual Clock Manual Clock Off Timer Off Timer On Timer On Timer Sleep Timer Sleep Timer Auto Off Auto Off - Timer function operates only if current time has been set. - Off-Timer function overrides OnTimer function if they are set both set to the same time. - The TV must be in standby mode for the On-Timer to work.
Operation Auto Off Auto Clock Auto Clock Manual Clock Manual Clock Off Timer Off Timer On Timer On Timer Sleep Timer Sleep Timer Auto Off Auto Off - If the TV is on and there is no input signal, the TV turns off automatically after 10 minutes. 1 2 3 4 TV will be automatically turned off in case of No Signal for 10 minutes. G Off On Press the MENU button and then use D / E button to select the TIME menu. Press the G button and then use D /E button to select Auto Off.
Operation Option Menu Features Aspect Ratio Control Set by program Horizon Selects the proper picture proportion to match the source’s image. (4:3 4:3) (16:9 The screen size is, more enlarged at both sides, to create a spectacular view. 16:9) Horizon Set By Program Set By Program Zoom 1 4:3 Choose 4:3 when you want to view a picture with an original 4:3 aspect ratio. Choose Zoom 1 when you want to view the picture without any alteration.
Operation Caption/Text * Analog Broadcasting System Captions Aspect Ratio Aspect Ratio Caption/Text Caption/Text Caption Option Caption Option Language Language - Select a caption mode for displaying captioning information if provided on a program. - Analog caption displays information at any position on the screen. - Text displays information, usually at the bottom position and is used for a data service.
Operation Option Menu Features continued Caption Option Aspect Ratio Aspect Ratio Caption/Text Caption/Text Caption Option Caption Option Language Language - Customize the DTV/CADTV captions that appear on your screen. 46 G Style Custom Size A Standard Font Font 0 Text Color White Text Opacity Solid Bg Color Black Bg Opacity Solid Edge Type None Edge Color Black 1 Press the MENU button and then use OPTION menu.
Operation Lock Menu Options Parental Control can be used to block specific channels, ratings and other viewing sources. The Parental Control Function (V-Chip) is used to block program viewing based on the ratings sent by the broadcasting station. The default setting is to allow all programs to be viewed. Viewing can be blocked by the type of program and by the categories chosen to be blocked. It is also possible to block all program viewing for a time period.
Operation Parental Lock Setup Lock System Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Input Block Lock System Set Password G Off On Block Channel Movie Rating TV Rating-Children TV Rating-General Input Block - Set up blocking schemes to block specific channels, ratings, and external viewing sources. - A password is required to gain access to this menu if the Lock System is turned on. 1 2 Press the MENU button and then use D / E button to select the LOCK menu.
Reference External Control Device Setup - Connect the RS-232C input jack to an external control device (such as a computer or an A/V control system) and control the Monitor’s functions externally. - Connect the serial port of the control device to the RS-232C jack on the TV back panel. - RS-232C connection cables are not supplied with the TV. RS-232C Setup RGB IN (PC) AUDIO IN (RGB/DVI) REMOTE CONTROL IN RS-232C IN (CONTROL & SERVICE) SERVICE) PC Type of Connector; D-Sub 9-Pin Male No.
Reference Set ID - Use this function to specify a TV ID number. - Refer to ‘Real Data Mapping’. See page 51. EZ Scan Manual Scan 1. Press the MENU button and then use SETUP menu. 2. Press the G button and then use D /E D /E button to select the Channel Edit DTV Signal button to select Set ID. Input Source Input Label 3. Press the G button and then use D / E button to adjust Set ID to choose the desired TV ID number. The adjustment range of Set ID is 1 ~ 99. Set ID 1 G 4.
Reference 01. Power (Command2:a) 05. Volume Mute (Command2:e) G To control volume mute on/off. You can also adjust mute using the MUTE button on remote control. Transmission G To control Power On/Off of the TV.
Reference 09. Color (Command2:i) 13. Remote Control Lock Mode (Command2:m) G To adjust the screen color. You can also adjust color in the Video menu. G To lock the remote control and the front panel controls on the set. Transmission Transmission [k][i][ ][Set ID][ ][Data][Cr] [k][m][ ][Set ID][ ][Data][Cr] Data Min : 0 ~ Max : 64 • Refer to ‘Real data mapping’. See page 51.
Reference 18. Tune Command (Command: m a) 19.
Reference IR Codes How to Connect G Connect your wired remote control to the Remote Control port on the TV. Remote Control IR Codes G Output waveform Single pulse, modulated with 37.
Reference Code (Hexa) 0B 0F 98 08 C4 C5 79 0E 10 ~ 19 4C 1A 09 02 03 00 01 1E AA 39 40 41 07 06 44 43 52 4D 5B 0A CB D6 5A D0 BF D4 D5 CE CC 76 77 AF E1 E0 Function INPUT TV INPUT MULTIMEDIA POWER POWER ON POWER OFF RATIO TIMER Number Key 0~ 9 - (Dash) FLASHBK MUTE VOL D VOLE CH D CH E FAV INFO CC D E F G ENTER MENU EZ SOUND EZ PIC EXIT SAP ADJUST TV AV1 AV2 COMPONENT 1 COMPONENT 2 RGB-PC HDMI1/DVI HDMI2 Ratio 4:3 Ratio 16:9 Ratio Zoom Note R/C Button R/C Button R/C Button R/C Button (Power On/Off) Disc
Reference Programming the Remote G The remote control is a multi-brand or universal remote control. It can be programmed to operate most remote-controllable devices of other manufacturers. Note that the remote control may not control all models of other brands. Programming a code into a remote mode INPUT TV MODE TV POWER INPUT DVD RATIO VCR HDMI COMP1 COMP2 EZ PIC MENU EXIT Test your remote control.
Reference Programming Codes VCRs Brand Codes Brand Codes Brand Codes Brand Codes AIWA AKAI 034 016 125 072 031 012 035 028 108 003 031 005 065 112 108 012 034 059 006 029 036 129 003 034 031 107 132 012 004 043 031 031 012 040 043 012 048 130 KENWOOD 014 047 001 101 034 003 017 040 031 067 012 069 101 027 031 003 033 101 045 013 013 049 151 034 024 012 048 043 053 066 133 013 063 031 031 067 101 013 PORTLAND PULSAR QUARTZ QUASAR RCA 108 072 011 033 013 040 107 145 003 031 053 058 148 014 032 1
Reference Digital Cable/Satellite Box Brand Codes Brand ALPHASTAR DSR AMPLICA BIRDVIEW CHANNEL MASTER 123 050 051 013 036 008 054 050 005 011 141 024 038 093 097 122 089 114 017 133 GENERAL INSTRUMENT 003 031 HITACHI 139 HOUSTON TRACKER 033 057 HUGHES 068 JANIEL 060 JERROLD 061 KATHREIN 108 LEGEND 057 LG 001 LUTRON 132 LUXOR 062 MACOM 010 065 MEMOREX 057 NEXTWAVE 028 NORSAT 069 CHAPARRAL CITOH CURTIS MATHES DRAKE DX ANTENNA ECHOSTAR ELECTRO HOME EUROPLUS FUJITSU 126 129 014 015 018 055 009 012 077
Reference Troubleshooting Checklist The operation does not work normally. The remote control doesn’t work • Check to see if there is any object between the product and the remote control causing obstruction. • Are batteries installed with correct polarity (+ to +, - to -)? • Correct remote operating mode set: TV, VCR etc.? • Install new batteries. Power is suddenly turned off • Is the sleep timer set? • Check the power control settings.
Reference The audio function does not work. Picture OK & No sound No output from one of the speakers Unusual sound from inside the product • Press the VOL or VOLUME button. • Sound muted? Press MUTE button. • Try another channel. The problem may be with the broadcast. • Are the audio cables installed properly? • Adjust Balance in menu option. • A change in ambient humidity or temperature may result in an unusual noise when the product is turned on or off and does not indicate a fault with the product.
Reference Maintenance - Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you will have your new TV. Be sure to turn the power off and unplug the power cord before you begin any cleaning. Cleaning the Screen 1. Here’s a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until it’s almost dry, and then use it to wipe the screen. 2.
Reference Product Specifications MODEL Dimensions with stand (Width x Height x Depth) 26LC2D (26LC2D-UE) 26.8 x 21.6 x 9.2 inches 681.0 x 550.0 x 235.0 mm without stand 26.8 x 19.3 x 4.7 inches 681.0 x 491.0 x 119.4 mm Weight with stand 37.0 pounds / 16.8 kg without stand 29.8 pounds / 13.
Reference 63
